If your plant is not getting enough light, the most common sign is the yellowing and dropping of leaves, stunted leaf growth, elongated stems, and a dull-green color. If your plant is getting too much light, then its leaves will have singed tips, burned patches, or will be falling off (yikes!).

Signs of damage

You can prevent this from happening by turning the plant once a week or every time you water. This ensure all leaves are exposed to roughly the same amount of light. All plants will bend towards their light source, and we recommend turning all your houseplants at least once a week to prevent “one-sided” growth.

How to prevent

Most plants will survive illuminance ten times lower than listed below but will not grow as well or bloom. Most plants grown as houseplants are selected because they are already adapted to growing at typical house temperatures, between 15° and 25°C. Exceptions do occur, and some plants require chilling periods at lower temperatures (down to 5° or 10°) in winter when less light is available. Houseplants are generally grown in specialized soils called potting compost or potting soil, not in local natural soil. A good potting compost mixture includes soil conditioners to provide the plant with nutrients, support, adequate drainage, and proper aeration. Most potting composts contain a combination of peat and vermiculite or perlite. Concern over environmental damage to peat bogs, however, is leading to the replacement of peat by coir (coconut fibre), which is a sustainable resource. Sterilised soil can also be used.

Treat

main

description

description_sm

description_sm_2

Lack of light

These insects are so small (a few millimeters in length), that winds can transport them for fairly long distances. They are often green, but might be red or brown, as well. They move quite slowly and cannot jump or hop. Aphids excrete a sugary liquid called honeydew, because the plant sap from which they feed contains excess carbohydrates relative to its low protein content. To satisfy their protein needs, they absorb large amounts of sap and excrete the excess carbohydrates. Honeydew is used as food by ants, honeybees, and many other insects.

Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before.

Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging. You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap.

Aphididae

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

The term “abiotic disorders” refers to a wide array of plant problems. We use the word “abiotic” to indicate that the symptom is not caused by a biological agent such as an insect, mite or pathogen.

Examine where symptoms first appear on a plant—on new leaves, old leaves or all over? Note the pattern of any discolouration or yellowing—is it all over, between the veins or around the edges? If only the veins are yellow, deficiency is probably not involved. Note general patterns rather than looking at Individual plants—are the symptoms distributed throughout a group of plants of the same type growing together? In the case of a deficiency all of the plants should be similarly effected, although distribution will depend on past treatments applied to the soil. Soil analysis, such as determining pH, can help to confirm the presence of physiological disorders. Considering recent conditions, such as heavy rains, dry spells, frosts, etc., may also help to determine the cause of plant disorders.

Testing soil and fertilizing accordingly. Collecting and testing samples to identify and treat pests or diseases. Aerating compacted soil with an air tool to “fluff” it without damaging roots. Pruning to help a tree recover from damage caused by storms, road salt, or extreme temperatures.

Abiotic

The most common sign of anthracnose is the spots that appear on new leaves. These spots are irregularly shaped and are tan, brown, or black in color. In some trees, these spots appear all over the leaves and on others they may appear along the leaf veins.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.

Anthracnose diseases typically do not kill the host directly, however, repeated infections on woody plants over a period of years may lead to a general decline and dieback. Control of anthracnose diseases becomes important when the host is economically important and the goal is production for fruit or lumber. Otherwise, anthracnose diseases generally go unattended and raise concern only when premature leaf drop calls attention to the situation.

Anthracnose

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Tissues affected by the symptoms of Erwinia amylovora include blossoms, fruits, shoots, and branches of apple (Pomoideae), pear, and many other rosaceous plants. All symptoms are above ground and are typically easy to recognize. Symptoms on blossoms include water soaking of the floral receptacle, ovary, and peduncles. This results in a dull, gray-green appearance at 1–2 weeks after petal fall, and eventually tissues will shrivel and turn black. The base of the blossom and young fruit show similar symptoms as infection spreads. Opaque white- or amber-colored droplets of bacterial ooze can be seen on the infected tissue when the environment is high in humidity. Shoots show similar symptoms but develop much more rapidly. A “Shepherd's Crook” can be seen when the tip of the shoot wilts, and diseased shoot leaves typically have blackening along the mid-vein and then die. In number, diseased shoots give the tree a blighted appearance. Initial infection of blossoms and shoots can spread to larger tree limbs. Branches will darken and become water soaked. Advanced infection develops cracks in bark and a sunken surface. Wood under the bark will become streaked with black discoloration. Immature fruit forms water-soaked lesions and later turned black. Bacterial ooze can be found on these lesions. Severe infections result in fruit turning entirely black and shriveling.

Phytosanitary measures have been employed as the best sanitary measures against E. amylovora dispersal. High risk countries are encouraged not to import plants susceptible to the pathogen into their territory because, once the bacteria become established in an area it is nearly impossible to eradicate the disease. Nurseries and orchards in such regions are placed on strict phytosanitary surveillance measures and well-monitored. Imported and infected crops are destroyed as soon as they are noticed since the bacteria spreads very rapidly and eradication methods are usually costly and inefficient.

The only effective treatment for plants already infected is to prune off the affected branches and remove them from the area. Plants or trees should be inspected routinely for the appearance of new infections. The rest of the plant can be saved if the blighted wood is removed before the infection spreads to the roots. There is no known cure; prevention is the key.

Fire blight

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Lower leaves are yellow. Plant looks wilted Roots will be rotting or stunted. No new growth. Young leaves will turn brown. Soil will appear green (which is algae)

Rainwater harvesting and recycled wastewater also allow to reduce scarcity and ease pressures on groundwater and other natural water bodies. Groundwater recharge, that allows water moving from surface water to groundwater, is a well-known process to prevent water scarcity.

The provision of water treatment chemicals ensures the provision of safe water.

Water-related issue

Leaf spots start as small brown spots, often with a yellow halo, and grow into irregular brown spots (up to 3/4"). Leaf spots sometimes develop a target-like pattern of rings. Severely infected leaves turn brown, curl upward, wither and die.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging.

Alternaria blight

Wilting, stunting, uneven plant growth, crown rot, plant death. Roots are discolored, the cortex may slough off, leaving the vascular cylinder.

Fertilize carefully with a slow-release formula in summer months. Water long and sparingly (no more than once a week), early in the day. This way, grass blades have a chance to dry out before nightfall. Aerate the soil to prevent thatch buildup and to loosen compacted, poorly draining soil.

For warm-season Pythium diseases, time fungicide applications preventively or at the very first onset of disease symptoms.

Pythium diseases

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

Yellowing between the leaf veins, sometimes with reddish brown tints and early leaf fall. Magnesium deficiency is common in tomatoes, apples, grape vines, raspberries, roses and rhododendrons.

Reducing or avoiding calcium-rich foods two hours before or after eating magnesium-rich foods. avoiding high-dose zinc supplements. treating vitamin D deficiency. eating raw vegetables instead of cooking them. quitting smoking.

Epsom salts dissolved in water and sprayed onto foliage and applied around the roots will cure magnesium deficiency. In future, feed plants in spring with balanced plant food that contains magnesium. For rhododendrons and azaleas, feed with a plant food specifically formulated for lime-hating or ericaceous plants.

Magnesium deficiency

The symptoms in the upper parts of the plants cannot be recognized in early stages of root infection.

Diagnosis of this disease is difficult and laborious because infected roots in the soil can only be detected by digging up the soil and observing the roots by eye, trapping mycelia around the infected roots by the bait twig method

Sordariomycetes

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

Symptoms vary across plant organs and tissues. B. cinerea is a soft rot that will have a collapsed and water soaked appearance on soft fruit and leaves. Brown lesions may develop slowly on undeveloped fruit. Twigs infected with gray mold will die back. Blossoms will cause fruit drop and injury, such as ridging on developing and mature fruit. Symptoms are visible at wound sites where the fungus begins to rot the plant. Gray masses with a velvety appearance are conidia on the plant tissues are a sign of plant pathogen. These conidia are asexual spores that will continue to infect the plant and surrounding hosts throughout the growing season making this a polycyclic disease. Plants can produce localized lesions when a pathogen attacks. An oxidative burst causes hypersensitive cell death called a hypersensitive response (HR). This soft rot can trigger HR to assist in colonization. Botrytis cinerea, as a necrotrophic pathogen, exploits the dead tissue for its pathogenicity or its ability to cause disease. Susceptible plants cannot use the HR to protect against Botrytis cinerea.

The best way to prevent gray mold is to space out plants so they have room to dry out after rain or watering. Remove infected flowers, leaves and stems. Infected plant parts should be buried or composted. Many flowering plants can recover from gray mold when warm, dry conditions return.

Prune or stake plants to improve air circulation between plants. · If growing indoors use a small clip-on fan to improve air flow.

Gray mold

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

The typical signs are brown or black feeding punctures visible on the affected plant tissues. Another conspicuous sign is honey dew, a sweet excretion that is released by the sucking insect. Often ants are attracted to feed on the honey dew.

Most true bugs do not cause serious harm to established plants. Provide proper cultural care so plants are vigorous. Provide adequate irrigation. Avoid growing shade-adapted species in full sunlight.

Effective ways to get rid of these stink bugs include sealing the house, dusting treatment, spraying with nicotine water, and using insect repellents. Stink bugs, also referred to as shield bugs, are a group of flying insects that belong to the Pentatomidae family of the order Hemiptera.

Hemiptera

Southern blight on plants is most likely to occur in the summer months when the soil is warm and moist. Symptoms include discolored lower leaves, wilted foliage, and plant collapse and it usually results in the death of the plant.

Preventing entry of the pathogen. Use of healthy, certified seeds of known origin. Careful cleaning of agricultural tools. Avoiding environmental conditions that favour development of the pathogen. Irrigation management. Plant density and growth habitats.

Soil solarization and certain organic amendments (e.g. composted chicken manure and rye-vetch green manure), as well as introducing certain Trichoderma spp. have also been shown to reduce plant death and number of sclerotia produced in the field in tomatoes. In addition to these cultural methods, chemical methods (e.g. fungicides) can also be employed.These methods all disrupt the production of mycelium and sclerotia, thus reducing the spread of disease.

Southern blight

Symptoms of bacterial infection in plants are much like the symptoms in fungal plant disease. They include leaf spots, blights, wilts, scabs, cankers and soft rots of roots, storage organs and fruit, and overgrowth. Bacterial spots: the most common symptom of bacterial disease is leaf spots.

The best way to prevent fungi from attacking your plants is to buy disease resistant varieties whenever possible. Other ways include minimizing the amount of water contacting foliage. Water at the soil level and early in the day. This allows foliage to dry out quickly, should it become wet.

Antibiotics: streptomycin and/or oxytetracycline may also help kill or suppress plant pathogenic bacteria prior to infection and reduce spread of the disease, but they will not cure plants that are already diseased. Antibiotics are also used to treat diseases caused by fastidious vascular bacteria.

Bacteria

Stems will be leggy or stretched out. Leaves turn yellow. Leaves are too small.

Arrange the light sources so that the plant receives the required number of photons.

Make sure your plant gets not too much/not too little light.

Light-related issue

Alternaria symptoms once infection begins include small, dark, circular spots that regularly reach ½ inch (1 cm.) in diameter.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging. Conventional gardeners can use chlorothanil, fludioxinil, imazalil, iprodine, maneb, mancozeb, or thiram on plants listed on the label of their chemical of choice, but should still strive for prevention in areas with known Alternaria pathogens.

Alternaria

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

As is common among rusts, the life cycle of Cronartium ribicola includes two host species and goes through five spore stages. This life cycle is termed heteroecious. In the specific case of Cronartium ribicola, the aecial host of this pathogen is the white pine (Pinus subgenus Strobus, family Pinaceae) and the telial hosts are those of the genus Ribes, specifically currants and gooseberries. Species of both telial and aecial hosts have varying levels of resistance or immunity to infection. On the aecial host, the first signs of C. ribicola are yellow or red spots on the Pinus needles, but these are small and can be difficult to see; more visible symptoms on the aecial host includes perennial cankers which appear on the branches within two years of infection. Looking at the infected plant as a whole, the Pinus will appear chlorotic, and stunted with dead branches or tops that turn a bright red color. On the other hand, the telial host, Ribes, can contract yellowish chlorotic leaf spots, but is otherwise not significantly impacted. The signs of C. ribicola on Ribes, come in the form of the pathogen itself as orange pustules on the underside of the leaf.

Examine white pines each year for blister rust flags and cankers. Prune off branches with cankers at a branch union or where the branch meets the trunk.  Infected branches don't require any special kind of disposal because the pathogen cannot survive in dead wood.

Pruning white pine blister rust is the treatment of choice for localized infections, but take care not to spread the spores when you're cutting out diseased tissue. Dispose of any pruned materials immediately in a fire or by double bagging in plastic.

White pine blister rust

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Usually the first sign of thrip damage is faded or dirty looking leaves. The leaves will start by turning white or grayish in color, then eventually brown as the damaged areas start to die.
Though it’s possible for thrips to kill a houseplant, it’s rare. Mature, healthy houseplants can handle a pretty heavy infestation. The biggest threat is to small or weak houseplants.
However, not only is a thrip infestation gross, they make your indoor plants look terrible, and heavy damage can stunt their growth. Other common symptoms include:
- Brown stripes on the leaves
- Faded, splotchy, pale-colored leaves
- Parts of the leaves are dying
- Flower buds are malformed, dropping, or won’t open
- Leaves start dropping unexpectedly
- New growth is deformed

Thrips can be difficult to get rid of. So, once you finally win the battle, you want to prevent them from ever coming back!
The good news is that there are a few easy ways to prevent thrips from infesting your houseplants…
- Monitor them on a regular basis for the first signs of an infestation
- Debug all of your plants before bringing them back inside for the winter
- Keep anything that you bring in from your garden (cut flowers, veggies…etc) far away from your houseplants
- Inspect all new houseplants before bringing them home, then quarantine them for a few weeks afterward

The first thing you should do as soon as you spot thrips on a houseplant is to quarantine the infested plant immediately. Then check all of the surrounding houseplants for signs of thrips, and isolate any others you may find.Make sure that you begin treating the infestation right away. Also, to help prevent thrips from spreading, always wash your hands after handling an infested houseplant.
RINSE THE LEAVES
If you can, take your houseplant outside, and rinse the leaves with the hose. That will remove many of the bugs, and quickly knock down their population.You could rinse the leaves in the sink or shower instead, and that will work too. Be sure to use tepid water, and take care not to overwater your houseplant in the process.
INSECTICIDAL SOAP
Soap kills thrips on contact, and will help to give you the upper hand. You can use a pre-mixed organic insecticidal soap, or make your own using 1 tsp mild liquid soap to 1 liter of water.Be sure to spray it directly on the infested leaves to kill the bugs. Insecticidal soap doesn’t have any kind of residual effect, so it’s important to treat them often in order to completely get rid of thrips.
WASH YOUR HOUSEPLANT
You could also try washing the leaves with diluted mild liquid soap, and rinse it off with water. This will kill thrips as well, and help to quickly get the population under control.Make sure you wash the undersides of leaves too, that’s where thrips like to hide. But before washing all of the leaves, it’s best to test the soap on a few first, to make sure it doesn’t damage your houseplant.
NEEM OIL 
It’s a naturally occurring insecticide, and also has a residual effect that will help to deter future infestations.Spray a neem oil solution directly on the leaves and stems. This will kill some of the bugs on contact, and others will die when they feed on the neem oil covered leaves. Either a pre-mixed horticultural oil or a hot pepper wax spray can also be very effective to get rid of thrips on houseplants.
STICKY TRAPS 
Since adult thrips are able to fly, sticky traps can work very well to capture them. Place either yellow or blue sticky traps near the infested houseplant to attract them.

Houseplant Thrips

There are many symptoms of aphid damage, including decreased growth rates, mottled leaves, yellowing, stunted growth, curled leaves, browning, wilting, low yields and, eventually, death. Along with the loss of plant juices from direct feeding, aphids can spread diseases.

1. Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before. 
2. Check for ants. 
3. Plant onions. 
4. Don't over fertilize your plants.

Despite the fact that herbal infusions and decoctions are not chemicals, it should not be overlooked that they: in high concentration can cause burns in plants; can be dangerous not only for aphids, but also for other insects; at least some of them are poisonous to humans. Therefore, it is necessary to use such drugs wisely, observing safety measures, recipes and rules for use. Before the first use, any solutions must first be checked in a limited area, and only then, having made sure of the effectiveness of the product, apply throughout the entire area. Fruit crops can be processed with decoctions and infusions during the budding period, immediately after flowering and no later than 14-40 days before harvesting. It is recommended to process berry crops with infusions before flowering and after the berries are harvested. Vegetable crops can be sprayed with herbal infusions for the last time no later than a month before the fruit is removed.

Sternorrhyncha

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

Symptoms of infection include a downward curling of the leaves, leaf tip dieback, stunting, necrosis of growing leaf tips, sunken ‘chicken pox-like’ spots on leaves (often with a surrounding halo), stem death and yellowing. Since these symptoms are so generic, extreme caution must be taken when introducing new plants to your greenhouse. Infected plants can not be cured and not all hosts display visible symptoms.

Impatiens necrotic spot control focuses on excluding INSV and preventing its spread. Inspect any plants entering a greenhouse (e.g., new plant shipments, plants moved in from outdoors) for viral symptoms and thrips. Isolate new plants until they are determined to be thrips- and virus-free.

Once you suspect impatiens necrotic spot, treatment won't help – you must destroy the plant immediately. If many plants are infected, it's a good idea to contact your university extension office for testing to confirm the virus is present.

Impatiens necrotic spot virus

The signs of damage vary, typically depending on the way that the insect feeds on the plant. Damage from insects with chewing mouthparts typically appears on leaves or stems as ragged edges, holes, or other missing tissue. Insects that often cause chewing damage include caterpillars and Eastern lubber grasshoppers.

Preventing the transmission of viruses can be the chief reason to control certain insects. An example is the importance of controlling western flower thrips when growing impatiens. Their transmission of tomato spotted wilt virus can devastate a crop being started in a greenhouse.

The most common way of damaging the crops is through direct injury, caused by feeding on above-ground and below-ground plant parts. This type of direct crop injury is related to the insect's mouthparts. For example, insects with chewing mouthparts, such as beetles, damage the crop by chewing the leaves or some other plant parts. Moreover, some of them cause damage by boring into the plant tissue, such as stem boring insects or leaf miners.

Feeding damage by insects

The first sign of powdery mildew is pale yellow leaf spots. White powdery spots can form on both upper and lower leaf surfaces, and quickly expand into large blotches. The large blotches can cover entire leaf, petiole and stem surfaces. When powdery mildew infects the majority of the foliage, the plant weakens and the fruit ripens prematurely.

Control is possible with triadimefon and propiconazole. It is also possible with hexaconazole, myclobutanil, and penconazole.

Standard fungicides are an effective way to manage powdery mildew disease on plants. Spray programs of conventional fungicides are advised to begin when powdery mildew symptoms and signs are first noticed. Conventional fungicides should be applied on a regular basis for best results against the disease.

Powdery mildew

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

The leaves become narrower and longer, and with severe damage, the plants become chlorotic and die.

There is no cure for nectria canker, so it is important to take steps to prevent it affecting young and vulnerable trees. Pruning injuries can be a major source of infection, so avoid pruning trees in the fall, especially in wet conditions. Restrict pruning to dry weather and remove any branches or stems that have been infected with the fungus.

Freezing damage is another important way in which trees get infected. For young transplants, providing protection from freezing can prevent the disease. Avoid other types of injury and keep your trees healthy to minimize the risks from nectria infection. This means being careful with the lawnmower around trees, preventing or managing pests, and providing adequate water and nutrients.

Nectriaceae

Yellowing and shrivelling of lower leaves. Some or all of the plant suddenly wilts, especially in hot weather. Plants may recover in cooler or wetter conditions. Brown or black streaks in the tissue under the bark. These are visible as a circle or part-circle of brown marks, if the stem is cut across transversely, or as brown lines if it is cut lengthways. In woody plants the marks are often in the outer (most recent) growth ring, although older infections that were not fatal may have left similar marks in older, inner growth rings. However, a few plants, such as chrysanthemums and roses, don't usually show these marks when infected. Branch dieback is a common symptom in trees and shrubs. Sometimes only part of the plant may wilt and dead branches may indicate infections which occurred in previous years.

Water the plant regularly, and when possible, provide afternoon shade. Fertilize on schedule, using a low-nitrogen, high-phosphorus fertilizer. Prune off dead and dying branches. You can often get rid of the verticillium wilt fungus in the soil by solarization.

There is no effective treatment for verticillium wilt. For affected vegetables, remove and dispose of the plant; don't compost it. For landscape plants, prune out affected branches and dispose of them immediately. Do not use infected wood for chips for landscape mulch.

Verticillium wilt

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Thysanoptera

Signs of sap-sucking insect injury consist of enlarged growths or galls, leaf curling, bleaching, or yellowing of foliage. Conifers are more severely injured than hardwoods.

Use insecticidal soap, kelthane, or malathion to control the mites. Control of sucking insects with insecticides is often difficult because of the insects' capacity to reproduce rapidly. Also, they may develop resistance to the chemicals. Often a blast of water from a garden hose will knock the pests off the plant.

There are many natural enemies that help control sap-sucking insects and mites. Insecticide use can sometimes prolong infestations by killing natural enemies of these insects.

Impact of sap-sucking insects

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

In the fruits, black or brown lesions (e.g., on pods, scab, and pitting) are common. Infection on the inflorescence produces blight, necrosis, and lesions with flecks and streaks. Infected leaves produce abnormal colors and patterns with dark, necrotic, angular, or irregular areas.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.  Water your plants with a drip sprinkler, as opposed to an overhead sprinkler.. Keep ripening fruits from touching the soil. Remember to rotate your plants every 2 to 3 years.

The best control products were Daconil Ultrex (chlorothalonil), Pageant (pyraclostrobin and boscalid) and Spectro 90WDG (chlorothalonil and thiophanate methyl). In addition, mancozeb (i.e., Dithane and Pentathlon) or copper were also very effective when used preventively.

Colletotrichum

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Phytoplasmas can infect and cause various symptoms in more than 700 plant species. One characteristic symptom is abnormal floral organ development including phyllody, (i.e., the production of leaf-like structures in place of flowers) and virescence (i.e., the development of green flowers attributable to a loss of pigment by petal cells). Phytoplasma-harboring flowering plants may nevertheless be sterile. The expression of genes involved in maintaining the apical meristem or in the development of floral organs is altered in the morphologically affected floral organs of phytoplasma-infected plants. A phytoplasma infection often triggers leaf yellowing, probably due to the presence of phytoplasma cells in phloem, which can affect phloem function and carbohydrate transport, inhibit chlorophyll biosynthesis, and trigger chlorophyll breakdown. These symptoms may be attributable to stress caused by the infection rather than a specific pathogenetic process. Many phytoplasma-infected plants develop a bushy or "witch's broom" appearance due to changes in their normal growth patterns. Most plants exhibit apical dominance but infection can trigger the proliferation of axillary (side) shoots and a reduction in internode size. Such symptoms are actually useful in the commercial production of poinsettias. Infection triggers more axillary shoot production; the poinsettia plants thus produce more than a single flower.

Phytoplasmas are normally controlled by the breeding and planting of disease-resistant crop varieties (perhaps the most economically viable option) and by the control of insect vectors.

Plantibodies targeting phytoplasmas have also been developed. Tetracyclines are bacteriostatic to phytoplasmas.However, disease symptoms reappear in the absence of continuous antibiotic application. Thus, tetracycline is not a viable agricultural control agent, but it is used to protect ornamental coconut trees.

Phytoplasma

The earliest symptoms of rose rosette disease include a red pigmentation of the underside of leaf veins followed by sharply increased growth of vegetative shoots, which are typically more succulent than normal and colored in various shades of red. Leaves often become deformed, crinkled, and brittle with yellow mosaics and red pigmentation. As the disease progresses, leaves become very small, petioles are shortened, and most lateral buds grow, producing short, intensely red shoots. The disease causes the plant to be exceptionally susceptible to freeze damage. Symptoms on cultivated roses are typically less severe than on multiflora rose. Cultivated roses show symptoms of thickened, succulent stems and a proliferation of thorns. Symptoms can mimic some forms of herbicide damage.

Prune your roses in late winter or early spring. Do not use leaf blowers around your roses. Protect roses from prevailing winds with walls or other plants. Give your roses plenty of space. Control multiflora rose in your area.

1. Remove ornamental roses with symptoms. The entire plant including the roots should be removed and destroyed by burning or placing in a plastic bag. Care must be taken when working with diseased plants as you can facilitate spread of the mites that spreads the disease. Bag the plant before removal, cut it at ground level and then dig out the plant’s roots. Soil need not be removed. Clean tools and put on fresh clothing before moving to a disease-free plant or area. 2. Plant ornamental roses as far away as possible from known stands of multiflora rose. The general recommendation is maintain at least 300 feet between your roses and any stands of multiflora rose. Even greater distance is preferred especially if they are upwind of your desirable rose plants. 3. Control the disease by controlling the mite. Start mite control early by pruning your roses hard in late winter (back by 2/3) to remove as many overwintering mites as possible and then spray with horticultural oil to kill any remaining mites. Organic pesticides such as horticultural oils and insecticidal soap are recommended over other pesticides as these organic pesticides are less harmful to natural predators that feed on the problem mites. Apply weekly  during the months of June and July paying particular attention to the new growing tips where the mites will congregate. Refrain from using leaf blowers around roses as they can spread mites. 4. Help to isolate your roses. Do not plant roses too close together. With extra space between the plants mite movement can be reduced. Also, consider interplanting roses with other ornamental plants. 5. Using rose rosette disease as an IPM strategy. The multiflora rose is an exotic invasive species that is responsible for the degradation of millions of acres of farmland and recreational areas. Using the disease to control this invasive weed can cut costs and be considered environmentally friendly for reducing the amount of synthetic chemicals used. However, the disease also affects cultivated roses. One should be extremely cautious and good neighbor-minded when it comes to rose rosette disease.

Rose rosette disease

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Bulbophyllum Keekee

(Bulbophyllum Keekee)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists