When late blight infects stems, everything above the infection site dies. Infected tomato fruits develop rough, leathery spots or dark, water-soaked areas that rot rapidly. Potato tubers bear dark, irregular spots on the surface and reddish-brown spots that extend down into the flesh. Decay continues after harvest.

Signs of damage

Fungicides for the control of potato blight are normally only used in a preventative manner, optionally in conjunction with disease forecasting. In susceptible varieties, sometimes fungicide applications may be needed weekly. An early spray is most effective. The choice of fungicide can depend on the nature of local strains of P. infestans. Metalaxyl is a fungicide that was marketed for use against P. infestans, but suffered serious resistance issues when used on its own. In some regions of the world during the 1980s and 1990s, most strains of P. infestans became resistant to metalaxyl, but in subsequent years many populations shifted back to sensitivity. To reduce the occurrence of resistance, it is strongly advised to use single-target fungicides such as metalaxyl along with carbamate compounds. A combination of other compounds are recommended for managing metalaxyl-resistant strains. These include mandipropamid, chlorothalonil, fluazinam, triphenyltin, mancozeb, and others. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against late blight.

How to prevent

Ridging is often used to reduce tuber contamination by blight. This normally involves piling soil or mulch around the stems of the potato blight meaning the pathogen has farther to travel to get to the tuber. Another approach is to destroy the canopy around five weeks before harvest, using a contact herbicide or sulfuric acid to burn off the foliage. Eliminating infected foliage reduces the likelihood of tuber infection.

Treat

main

description

description_sm

description_sm_2

Late blight

All members of the class produce basidiocarps which range in size from tiny cups a few millimeters across to a giant polypore (Phellinus ellipsoideus) greater than several meters across and weigh up to 500 kilograms (1,100 lb). Agaricomycetes produce mushrooms, and are therefore the most familiar and conspicuous of all Fungi. Other Fungi produce macroscopic fruiting bodies as well, but the diversity of forms in the Agaricomycetes is unmatched.

A proven fungicide that prevents disease from becoming active and treats it quickly is a crucial part of your protection plan. GardenTech® Daconil® Fungicide, with the active ingredient chlorothalonil, provides protection against a broad spectrum of fungal pathogens and simplifies controlling fungal disease from your garden.

Used as a preventive and an active treatment, Daconil® Fungicide can prevent, control or stop more than 65 types of fungal disease on flowers, vegetables, shrubs, fruit and shade trees.

Agaricomycetes

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

Scales or shell-like bumps on plant stems and the underside of leaves. These are the outer coverings of scale insect. Large populations may result in poor growth. Some species of scale insect excrete honeydew, which accumulates on the upper leaf surfaces. This can be colonised by a black non-parasitic fungus known as sooty mould. Some scale insects deposit their eggs under a covering of white waxy fibres in early summer.

Check susceptible plants frequently from spring onwards so action can be taken before a damaging population has developed. When choosing control options you can minimise harm to non-target animals by starting with the methods in the non-pesticide control section. If this is not sufficient to reduce the damage to acceptable levels then you may choose to use pesticides. Within this group the shorter persistence pesticides (that are usually certified for organic growing) are likely to be less damaging to non-target wildlife than those with longer persistence and/or systemic action. Light infestations are of little consequence and can be tolerated. The best time to treat heavy attacks is when the more vulnerable nymphs are present, for many scales out of doors this is during mid-late summer. Scale insects on indoor plants can breed all year round and so there is no best time of year to treat. Note that dead scales can remain firmly attached to the plants. The success of any treatment can be gauged by the extent to which new growth remains free of scale insects.

To get rid of scale insects prune and dispose of infested branches, twigs and leaves. When scale numbers are low they may be rubbed or picked off of plants by hand. Dabbing individual pests with an alcohol-soaked cotton swab or neem-based leaf shine will also work when infestations are light.

Coccoidea

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Signs of sap-sucking insect injury consist of enlarged growths or galls, leaf curling, bleaching, or yellowing of foliage. Conifers are more severely injured than hardwoods.

Use insecticidal soap, kelthane, or malathion to control the mites. Control of sucking insects with insecticides is often difficult because of the insects' capacity to reproduce rapidly. Also, they may develop resistance to the chemicals. Often a blast of water from a garden hose will knock the pests off the plant.

There are many natural enemies that help control sap-sucking insects and mites. Insecticide use can sometimes prolong infestations by killing natural enemies of these insects.

Impact of sap-sucking insects

Wilted, downward-hanging foliage is often the first obvious symptom of Armillaria root rot. Other symptoms include foliage yellowing, leaf drop, and dieback of upper limbs. During the rainy fall and winter, groups of short-lived mushrooms often grow around the base of Armillaria-infected trees.

Cultural practices can also be effective for preventing the spread of Armillaria. High temperatures interfere with the progression of this disease; if soil temperatures reach 79 °F (26 °C), then the growth of Armillaria in the soil will be limited. Using collar excavation to expose primary roots directly below the crown to the continuous cycle of solar heating and air may reduce the colonization from Armillaria in trees that are already infected. This is called root collar excavation (RCE), and while it has been applied to citrus orchards and grapevines, this method has high labor costs and involvement due to the difficulty of carefully exposing these primary roots.

Sadly, there is no absolute treatment for Armillaria root rot. The disease can be managed by the consistent removal of dead trees and infected stumps. Armillaria requires consistent moisture to survive, and in citrus groves, excavation around the root crown has been an effective deterrent but not an ultimate cure.

Armillaria root rot

Hosta virus X does not kill the plants infected, but Hostas that have been infected do show a variety of other symptoms, such as: Ink-bleed, which makes the plant look discolored in certain spots, and this effect is generally centered on a vein. An example of this is shown in the photo in this article. Desiccation or Collapsed tissue, which can be signs of heavier infection, makes the plant look as if it is dried out. Mottling, which makes the plant appear blotchy. This is not always a symptom of HVX, and could be from another virus, but it should always be treated as an infected plant regardless. A Hosta may no longer express symptoms of the virus when it grows back in the Spring, even though it may have shown symptoms in a previous year. Nonetheless, the plant should still be considered infected with HVX.

The only way to eliminate the disease is to destroy infected plants (and any associated plant debris) by burning (where allowed by local ordinance) or landfilling. DO NOT compost hostas with HVX.

Once a Hosta plant is infected, it will be infected for the rest of its life. Any plant suspected of being infected should be burned if it is legal to do so. If it is not, then it should be tossed in the garbage, but infected Hosta plants should never be composted. If any plant in a batch shows symptoms, the entire batch should be considered infected and be destroyed. Once a plant has been removed, the spot occupied by the Hosta should be left empty for a long time to prevent the spread of the virus to a plant that replaces it. The virus primarily spreads through infected sap, so cutting multiple plants with the same tool can spread the virus. Animals that eat the plants may also spread the virus through sap by eating from an infected plant and then eating from an uninfected plant.

Hosta virus x

Plants infected by chrysanthemum white rust exhibit spots on the upper surfaces of leaves. These spots are initially pale-green to yellow in color and up to 5mm in diameter, but may turn brown as the tissue becomes necrotic. On the underside of the leaf, the spots develop into pink or white pustules that become prominent as the teliospores develop.

Buy cuttings from a reliable source. Inspect them when they come in and regularly thereafter for symptoms of white rust. Water with drip tapes or individual emitters if possible to avoid splashing spread via overhead irrigation.

Keep susceptible cultivars isolated. Pick off and burn affected leaves. Use cuttings from healthy plants only. Remove plant debris and escaped plants. Keep humidity low, and avoid wetting foliage.

Chrysanthemum white rust

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Symptoms of bacterial infection in plants are much like the symptoms in fungal plant disease. They include leaf spots, blights, wilts, scabs, cankers and soft rots of roots, storage organs and fruit, and overgrowth. Bacterial spots: the most common symptom of bacterial disease is leaf spots.

The best way to prevent fungi from attacking your plants is to buy disease resistant varieties whenever possible. Other ways include minimizing the amount of water contacting foliage. Water at the soil level and early in the day. This allows foliage to dry out quickly, should it become wet.

Antibiotics: streptomycin and/or oxytetracycline may also help kill or suppress plant pathogenic bacteria prior to infection and reduce spread of the disease, but they will not cure plants that are already diseased. Antibiotics are also used to treat diseases caused by fastidious vascular bacteria.

Bacteria

These weevils are pests of over 100 plants, ranging from weeds to shrubs to greenhouse plants. Some of the common host plants in Maryland include azalea, holly, strawberry, rhododendron, yew, and grape.
When weevils are present in low numbers only a few notches on the edges of leaves will be apparent. If many weevils are present, the leaves are often scalloped and left with only the main vein.
The grubs are highly destructive to plants. When small, grubs consume feeder roots. Larger grubs feed on larger roots, stripping the bark and sometimes girdling the plant crown. This blocks the flow of water and nutrients to the foliage.
Infested plants have stunted growth; leaves turn yellow and then wilt.

1 Quarantine or dispose of any soil from pots where vine weevil have been found. Don't reuse this or throw on the garden because it may still contain vine weevil eggs, larvae or pupae.
2Remove plants that have unexplainably wilted and died and examine the roots. If they appear eaten, then search the surrounding soil and destroy any vine weevil larvae that you find.
3 Look for leaf edge notching on garden plants to indicate where adult vine weevils are feeding. Then treat the surrounding soil with nematodes during the summer months to control any larvae that appear.
4 Avoid using broad spectrum insecticides which will kill soil-dwelling predators of vine weevil larvae, such as centipedes and carab beetles.
5 Encourage insectivorous birds by hanging feeders in winter and provide nesting boxes in spring.

- Check plants every week to prevent weevil infestations becoming out of control and deal with early signs immediately.
- Remove and destroy newly-hatched adults to reduce the numbers of eggs laid in the soil. This is best done at night, with a torch, when the weevils are most active.
- Use netting and fleeces to stop adults moving between plants and laying eggs within pots.
-Replant perennial pot plants in the spring and look for and remove any vine weevil larvae you find.
- Use commercially available nematodes (microscopic worm-like creatures) Steinernema kraussei and Heterorhabditis megidis that can be watered into pots or surrounding soil to control vine weevil larvae. The nematodes seek out and kill vine weevils.
- BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
- Fast-acting crack and crevice sprays, like Don’t Bug Me, can be used around windows, doors and vents to prevent adult weevils from entering structures.
- Least-toxic botanical insecticides should be used as a last resort. Derived from plants which have insecticidal properties, these natural pesticides have fewer harmful side effects than synthetic chemicals and break down more quickly in the environment.

Weevils

Rust diseases come in different varieties and can affect a wide range of plants. People often struggle with rust on their roses. It is easy to remember the defining characteristics of this fungus, as they match its name. Rust plant disease will look similar to the rust that appears on that old bicycle in the shed.
- Look for yellow or white spots forming on the upper leaves of a plant.
- Look for reddish to orange blister-like swellings called pustules on the undersides of leaves.
- Orange or yellow spots or streaks appear on the undersides of the leaves.
- Within these spots that form are spores.
- Usually leaf distortion and defoliation occur.

- Dust your plants with sulfur early in the season to prevent infection or to keep mild infections from spreading.
- Space your plants properly to encourage good air circulation.
- Avoid wetting the leaves when watering plants.
- There are many effective rust fungicides you can try.

1 Select rust-resistant plant varieties when available.
2 Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris.
3 Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day. Drip irrigation and soaker hoses can be used to help keep leaves dry.
4 Use a slow-release, organic fertilizer on crops and avoid excess nitrogen. Soft, leafy, new growth is most susceptible.
5 Apply copper sprays or sulfur powders to prevent infection of susceptible plants. For best results, apply early or at first sign of disease. Spray all plant parts thoroughly and repeat every 7-10 days up to the day of harvest.
6 Effectively treat fungal diseases with SERENADE Garden. This broad spectrum bio-fungicide uses a patented strain of Bacillus subtilis and is approved for organic gardening. Best of all, it’s safe to use — you can treat and pick crops the same day!
7 Containing sulfur and pyrethrins, Bonide® Orchard Spray is a safe, one-hit concentrate for insect attacks and fungal problems. For best results, apply as a protective spray (2.5 oz/ gallon) early in the season. If disease, insects or wet weather are present, mix 5 oz in one gallon of water. Thoroughly spray all parts of the plant, especially new shoots.
8 Prune or stake plants and remove weeds to improve air circulation. Make sure to disinfect your pruning tools (one part bleach to 4 parts water) after each cut.
9 Use a thick layer of mulch or organic compost to cover the soil after you have raked and cleaned it well. Mulch will prevent the disease spores from splashing back up onto the leaves. Burn or bag infected plants after the growing season . Do NOT compost.

Leaf Rust

The most common sign of anthracnose is the spots that appear on new leaves. These spots are irregularly shaped and are tan, brown, or black in color. In some trees, these spots appear all over the leaves and on others they may appear along the leaf veins.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.

Anthracnose diseases typically do not kill the host directly, however, repeated infections on woody plants over a period of years may lead to a general decline and dieback. Control of anthracnose diseases becomes important when the host is economically important and the goal is production for fruit or lumber. Otherwise, anthracnose diseases generally go unattended and raise concern only when premature leaf drop calls attention to the situation.

Anthracnose

The earliest symptoms of rose rosette disease include a red pigmentation of the underside of leaf veins followed by sharply increased growth of vegetative shoots, which are typically more succulent than normal and colored in various shades of red. Leaves often become deformed, crinkled, and brittle with yellow mosaics and red pigmentation. As the disease progresses, leaves become very small, petioles are shortened, and most lateral buds grow, producing short, intensely red shoots. The disease causes the plant to be exceptionally susceptible to freeze damage. Symptoms on cultivated roses are typically less severe than on multiflora rose. Cultivated roses show symptoms of thickened, succulent stems and a proliferation of thorns. Symptoms can mimic some forms of herbicide damage.

Prune your roses in late winter or early spring. Do not use leaf blowers around your roses. Protect roses from prevailing winds with walls or other plants. Give your roses plenty of space. Control multiflora rose in your area.

1. Remove ornamental roses with symptoms. The entire plant including the roots should be removed and destroyed by burning or placing in a plastic bag. Care must be taken when working with diseased plants as you can facilitate spread of the mites that spreads the disease. Bag the plant before removal, cut it at ground level and then dig out the plant’s roots. Soil need not be removed. Clean tools and put on fresh clothing before moving to a disease-free plant or area. 2. Plant ornamental roses as far away as possible from known stands of multiflora rose. The general recommendation is maintain at least 300 feet between your roses and any stands of multiflora rose. Even greater distance is preferred especially if they are upwind of your desirable rose plants. 3. Control the disease by controlling the mite. Start mite control early by pruning your roses hard in late winter (back by 2/3) to remove as many overwintering mites as possible and then spray with horticultural oil to kill any remaining mites. Organic pesticides such as horticultural oils and insecticidal soap are recommended over other pesticides as these organic pesticides are less harmful to natural predators that feed on the problem mites. Apply weekly  during the months of June and July paying particular attention to the new growing tips where the mites will congregate. Refrain from using leaf blowers around roses as they can spread mites. 4. Help to isolate your roses. Do not plant roses too close together. With extra space between the plants mite movement can be reduced. Also, consider interplanting roses with other ornamental plants. 5. Using rose rosette disease as an IPM strategy. The multiflora rose is an exotic invasive species that is responsible for the degradation of millions of acres of farmland and recreational areas. Using the disease to control this invasive weed can cut costs and be considered environmentally friendly for reducing the amount of synthetic chemicals used. However, the disease also affects cultivated roses. One should be extremely cautious and good neighbor-minded when it comes to rose rosette disease.

Rose rosette disease

Bacterial leaf spots show as necrotic, circular or angular lesions and may have a yellowish outline or halo. Early symptoms of bacterial leaf spots show on older leaves and lesions appear water-soaked. Bacterial spots affecting dicytyledounous plants that have net-like leaf veins sometimes take a more angular shape as they are restricted by the large leaf veins. Bacterial spots on monocotyledonous plants with parallel leaf veins have a streak or striped appearance. The most obvious symptom of bacterial leaf spots are the blackening of the spots after infection. Eventually older lesions dry out and become papery in texture. Bacterial spots can also produce white, yellow, light cream or silver bacterial exudate depending on the type of bacteria, which may ooze from splitting lesions and/or from the underside of the spots. Bacterial leaf spots caused by Pseudomonas show red-brown spots which can distort the infected leaves, whilst those caused by Xanthomonas are angular or circular in shape outlined with a yellow halo.

Prevention of leaf spot disease includes variety selection, crop rotations, plant hygiene and fungicide use for seeds and foliage. To stop the spread of pathogens good sanitation is key as well as the avoidance of handling plants when wet, planting pathogen-free and resistant cultivars and moving out infected plants. Reducing the humidity around plants and in greenhouses by good plant spacing for air circulation, and watering early in the day can also help prevent leaf spot disease. Disinfection of tools and washing of hands is important when handling infected plants. Susceptibility to leaf spot disease can occur due to insufficient or excessive fertilising of plants. Checking plants periodically for any signs and symptoms of disease is also good practice. Avoiding overhead watering and increasing air circulation by pruning plants should be done to prevent humid conditions. Collecting and removing fallen leaves is important in reducing the amount of pathogenic agents on the ground to prevent dispersal of disease.

Certain chemicals are used to treat leaf spot disease, such as the Bordeaux mixture, the first fungicide to have been developed, which treats many fungal and bacterial leaf spots. Other fungicides such as zineb, chlorothalonil and Captan, also treat leaf spot disease and Benomyl specifically treats Cercospora leaf spots, cherry leaf spot and black spot of roses. Thiabendazole is used to treat leaf spot diseases of turf and ornamentals. Both fenarimol and nuarimol are pyrimidines that also treats leaf spot disease. More chemicals include Triazoles an organosphosphate fungicide, Imazalil, Procholora and Fentin hydroxide. Registered fungicides in use are thiophanate methyl, chlorothalonil, ferban and mancozeb.

Bacterial leaf spot

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

Leaves - abnormal colours, abnormal leaf fall, abnormal leaf fall, internal feeding, wilting.

Avoid heat sources such as radiators. Protect the plant from direct sunlight during the hotter hours if placed behind a window. The temperature must never drop below 60°F (15°C).

Maintain a regular watering schedule. Water stephanotis regularly during the first growing season. Fertilize with a balanced mix. Scatter about 1/4 cup of dry fertilizer on the soil around the plant in early spring.  Prune in late winter or early spring.

Stephanitis

Mealybugs have needle-like sucking mouthparts. Feeding activity can cause a yellowing of host leaves, distorted growth, premature leaf drop, and, with heavy populations, plant death. Mealybugs also produce large amounts of a sweet, sticky liquid waste product called honeydew. A black fungus called sooty mold may grow on the honeydew.

This pest is usually brought into the interiorscape on an infested plant. Therefore, one of the best ways to manage mealybugs on houseplants is to carefully check plants being considered for purchase and reject any infested plants. Quarantine new plants for 7-10 days in an isolated spot, and check for signs of mealybugs or other household pests before adding the plants to your interiorscape.
Provide proper cultural control so that the plants are vigorous and can tolerate moderate mealybug feeding without suffering too much damage. Do not over-water or over-fertilise — mealybugs are attracted to plants with high nitrogen levels and soft growth. Removing overwintering sites, such as loose bark, can help to reduce mealybug numbers. Predatory insects, such as lacewings, syrphid flies, ladybirds, and several small parasitic wasps, prey on outdoor mealybugs and can often keep their numbers down. An introduced beetle, Cryptolaemus montrouzieri, the mealybug destroyer, is available commercially for release in greenhouses. Avoid the unnecessary use of insecticide to minimise any adverse effect on these beneficial insects. Manage ants, which are attracted to honeydew produced by the mealybugs and will inhibit the activities of natural enemies.

1 Wash them away: Mealybugs can be dislodged with a steady stream of water. Repeat the treatment as necessary. This is best for light infestations.
2 Insecticidal soap: Insecticidal soaps are available on the market, or you can make your own by using a dish detergent such as Ivory Liquid. Try to find a product free of perfumes and additives that might harm plants. Mix the soap in a weak concentration with water (starting a 1 teaspoon per gallon and increasing as necessary). Spray on plants.
3 Neem oil: Neem oil is derived from the neem tree. Use according to label instructions. In addition to its insecticidal properties, neem is also a fungicide and has systemic benefits (meaning the plant absorbs it so it can control insects it doesn't directly contact). According to the Environmental Protection Association, neem is safe for use on vegetables and food plants as well as ornamentals.
4 Kitchen insect spray: This all-purpose insect spray. To make a batch, combine 1 garlic bulb, 1 small onion, and 1 teaspoon of cayenne pepper in a food processor or blender and process into a paste. Mix into 1 quart of water and steep for 1 hour. Strain through a cheesecloth and add 1 tablespoon of liquid dish soap. Mix well. The mixture can be stored for up to 1 week in the refrigerator.

Mealybug Pests

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

Symptoms begin as oval to elongate lesions that are generally reddish-brown in color. In the late stages of the disease, erumpent pustules produce numerous black sooty spores. Severe infestations with many stem lesions may weaken plant stems and result in lodging.

Since the fungus overwinters on other plant material, clean up dead plants at the end of the season. Rotate your allium crops to areas that were not previously hosting plants in the family. Remove wild forms of allium, which can also host the fungal spores.

The rust species Puccinia obtegens has shown some promise for controlling Canada thistle, but it must be used in conjunction with other control measures to be effective.

Puccinia

Brown, yellow, gray, or straw-colored needles at tip of current season's growth; needles usually stunted and shoot may curl. Branch dieback. Small, black fruiting bodies on needles, cones, or shoot tissue. Cankers on stems or branches. Oozing resin that adheres to blighted needles.

Preventing the initial infection is a better strategy than attempting to cure a diseased tree. The first line of defense in preventing disease is planting disease free stock, planting in a disease free area, and selecting a disease resistant species. Beyond the selection of clean, resistant stock and planting location, trees that have proper water and nutrient management are healthier and less susceptible to Diplodia tip blight. Controlling wood boring insects that create wounds for Diplodia to exploit, is another cultural practice that can prevent disease. Poor airflow and high humidity are conditions that favor disease development; keeping grass and weeds trimmed down at the base of the tree allows for better airflow and can limit disease development. Once a tree is diseased, the goal is to limit the amount of inoculum present. The blighted needles and cones will have the pycnidia survival structures that contain thousands of spores. Remove debris from the base of the tree and destroy. During dry weather (not during Spring or early Summer), cut away infected shoots, cones, and branches. Sanitary techniques like sanitizing pruning tools between each cut will prevent further spread of the disease.

When disease pressure is high, chemical controls is advised. First, spray should occur early spring at candle elongation. Repeated sprays should occur every two weeks until needles reach full size. Fungicides containing the following active ingredients have been shown to be efficacious: chlorothalonil, methyl, thiophanate-methyl, mancozeb, and copper hydroxide with mancozeb. Always read and follow the label.

Sphaeropsis blight

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

Yellowing (Chlorosis) occur in the newly emerging leaves instead of the older leaves and usually seen in the interveinal region Fruit would be of poor quality and quantity. Chlorosis occurs in younger leaves because iron is not a mobile element, and as such, the younger leaves cannot draw iron from other areas of the plant. Over time, the yellowing may even turn a pale white or the whole leaf may be affected. Iron deficient plants may overaccumulate heavy metals such as cadmium. Any plant may be affected, but raspberries and pears are particularly susceptible, as well as most acid-loving plants such as azaleas and camellias.

Prevention is the best control. Do not plant chlorosis-susceptible trees in soils having a high pH or in soils low in organic matter. If practical, replace species that are susceptible. When the leaves of plants become chlorotic, always determine the primary cause through a soil test.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II) sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

Iron deficiency

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

Springtails occasionally feed on plant roots, but the damage is minimal. Problems arise when these pests congregate in moist areas and multiply. Thousands of springtails blanket walls, foundations and patios as their numbers grow. If not stopped outdoors, springtails multiply indoors in damp basements, kitchens and bathrooms — anywhere with sufficient moisture.

It is not difficult to keep this insect at bay. First of all ensure that house plants are always grown in sterile potting compost (this will also help keep away the diseases that the soil can contain).
If there is insufficient drainage, the compost can become waterlogged, so, next, always ‘crock’ a pot with a layer of grit or clay pellets before adding compost. If the compost to be used is too compact, coarse sand or perlite can be added to make it more free-draining.
If you find it difficult to assess when to water use a moisture meter, a self-watering cone or a container with a reservoir. In the latter cases, the compost takes up water gradually as it dries out, ensuring an even supply.

1 First of all, stop watering the plant and allow it almost to dry Out before re-watering. ‘This may be enough to eradicate these pests. It not, then you will need to use a chemical.
2 Use a suitable chemical, in granule form or diluted with water, to soak the potting mixture.
3 Insecticides containing diazmon, lindanc, malathion, pyrethrum or resmethrin are suitable. Make sure that due ingredients of an insecticide are listed on its label. One application of the chemical should be enough but repeat the application after 8 days to ensure eradicating ideal conditions for springtails.
4 If your plants are infested with Springtails, you will know as soon as you water them, as these tiny insects will start jumping about on top of the potting mixture.
5 Springtails will thrive in waterlogged soil so always water very carefully and ensure that the plant has good drainage.

Springtails

Southern blight on plants is most likely to occur in the summer months when the soil is warm and moist. Symptoms include discolored lower leaves, wilted foliage, and plant collapse and it usually results in the death of the plant.

Preventing entry of the pathogen. Use of healthy, certified seeds of known origin. Careful cleaning of agricultural tools. Avoiding environmental conditions that favour development of the pathogen. Irrigation management. Plant density and growth habitats.

Soil solarization and certain organic amendments (e.g. composted chicken manure and rye-vetch green manure), as well as introducing certain Trichoderma spp. have also been shown to reduce plant death and number of sclerotia produced in the field in tomatoes. In addition to these cultural methods, chemical methods (e.g. fungicides) can also be employed.These methods all disrupt the production of mycelium and sclerotia, thus reducing the spread of disease.

Southern blight

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Yellowing between the leaf veins, sometimes with reddish brown tints and early leaf fall. Magnesium deficiency is common in tomatoes, apples, grape vines, raspberries, roses and rhododendrons.

Reducing or avoiding calcium-rich foods two hours before or after eating magnesium-rich foods. avoiding high-dose zinc supplements. treating vitamin D deficiency. eating raw vegetables instead of cooking them. quitting smoking.

Epsom salts dissolved in water and sprayed onto foliage and applied around the roots will cure magnesium deficiency. In future, feed plants in spring with balanced plant food that contains magnesium. For rhododendrons and azaleas, feed with a plant food specifically formulated for lime-hating or ericaceous plants.

Magnesium deficiency

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Thysanoptera

As is common among rusts, the life cycle of Cronartium ribicola includes two host species and goes through five spore stages. This life cycle is termed heteroecious. In the specific case of Cronartium ribicola, the aecial host of this pathogen is the white pine (Pinus subgenus Strobus, family Pinaceae) and the telial hosts are those of the genus Ribes, specifically currants and gooseberries. Species of both telial and aecial hosts have varying levels of resistance or immunity to infection. On the aecial host, the first signs of C. ribicola are yellow or red spots on the Pinus needles, but these are small and can be difficult to see; more visible symptoms on the aecial host includes perennial cankers which appear on the branches within two years of infection. Looking at the infected plant as a whole, the Pinus will appear chlorotic, and stunted with dead branches or tops that turn a bright red color. On the other hand, the telial host, Ribes, can contract yellowish chlorotic leaf spots, but is otherwise not significantly impacted. The signs of C. ribicola on Ribes, come in the form of the pathogen itself as orange pustules on the underside of the leaf.

Examine white pines each year for blister rust flags and cankers. Prune off branches with cankers at a branch union or where the branch meets the trunk.  Infected branches don't require any special kind of disposal because the pathogen cannot survive in dead wood.

Pruning white pine blister rust is the treatment of choice for localized infections, but take care not to spread the spores when you're cutting out diseased tissue. Dispose of any pruned materials immediately in a fire or by double bagging in plastic.

White pine blister rust

Sunscald symptoms will appear as yellow or white lesions on foliage and/or fruits. The lesions eventually may turn brown and/or shrivel. Foliage that is commonly affected includes impatiens, hosta, rhododendron, garden beans, peas, peppers and tomatoes.

When it comes to protecting your fruit plants and vines, common sense care is the best medicine for fruit sunscald prevention. Place the plants where they get enough shade in the afternoon. Give them the right amount of water and fertilizer, and be careful when you prune the branches and vines.

For plants already suffering, use a sunshade to restrict their exposure to UV light. Slowly give them more time each day with the sunshade removed until they are toughened up. This process can take about two weeks, at which time your plant should be ready for the sun.

Sunscald

Wilting. This is the classic sign of an under watered plant. Too little water causes a plant to lose turgor, the rigidity in cells and tissues. There are some diseases that can trigger wilting, but the easiest and most likely explanation is under watering. Dry soil. If the soil around a plant is dry, it may need more water. Exceptions to this are some succulents, like cacti, which don’t need much water because they can store it so well. Dry, dead leaf tips. When a plant doesn’t get enough water, the tips and edges of leaves dry out and turn brown. Ultimately, entire leaves will brown and die. Slow growth. If you are chronically under watering a plant, but still giving it enough water to survive, growth will be slower than normal or expected. New growth, such as leaves, may be small. Visible footprints. For a sign that turf grass is not getting adequate water, look to your footprints. After you step on the grass, it should bounce back quickly. If the footprints remain visible for several minutes, the grass is too dry.

Mulch plants with a 3-to-4-inch layer of organic mulch (woodchips, shredded bark) to reduce soil evaporation and temperature fluctuations, and to conserve moisture. Irrigate slowly so water percolates down into the soil. Do not fertilize unless adequate irrigation is available.

Most garden plants, flowers, and shrubs do best when they receive at least 1 inch of water per week, although they may need more during hot, dry spells. Rain isn't always sufficient at supplying enough water for plants to thrive, so don't count on it to keep plants healthy.

Water deficiency

Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

There is no cure for plants that already have damping off.

Rhizoctonia damping-off, blight and rot

The symptoms in the upper parts of the plants cannot be recognized in early stages of root infection.

Diagnosis of this disease is difficult and laborious because infected roots in the soil can only be detected by digging up the soil and observing the roots by eye, trapping mycelia around the infected roots by the bait twig method

Sordariomycetes

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Aphids

Raised yellowish-orange, powdery pustules on the surface of infected foliage. Significant foliar dieback occurs on especially susceptible cultivars.

As with other fungus, daylily rust thrives in moisture. Use soaker hoses rather than overhead watering systems and water in the morning rather than late in the day or at night. This will cut down on the amount of time that the leaves remain wet.

Do not move or transport infected plant material. Carefully inspect incoming plant material for signs of rust. Fungicide applications are needed for disease management, especially on susceptible cultivars. Contact your local extension office for information on ratings of cultivar susceptibility and current fungicide control recommendations.

Daylily rust

Symptoms vary across plant organs and tissues. B. cinerea is a soft rot that will have a collapsed and water soaked appearance on soft fruit and leaves. Brown lesions may develop slowly on undeveloped fruit. Twigs infected with gray mold will die back. Blossoms will cause fruit drop and injury, such as ridging on developing and mature fruit. Symptoms are visible at wound sites where the fungus begins to rot the plant. Gray masses with a velvety appearance are conidia on the plant tissues are a sign of plant pathogen. These conidia are asexual spores that will continue to infect the plant and surrounding hosts throughout the growing season making this a polycyclic disease. Plants can produce localized lesions when a pathogen attacks. An oxidative burst causes hypersensitive cell death called a hypersensitive response (HR). This soft rot can trigger HR to assist in colonization. Botrytis cinerea, as a necrotrophic pathogen, exploits the dead tissue for its pathogenicity or its ability to cause disease. Susceptible plants cannot use the HR to protect against Botrytis cinerea.

The best way to prevent gray mold is to space out plants so they have room to dry out after rain or watering. Remove infected flowers, leaves and stems. Infected plant parts should be buried or composted. Many flowering plants can recover from gray mold when warm, dry conditions return.

Prune or stake plants to improve air circulation between plants. · If growing indoors use a small clip-on fan to improve air flow.

Gray mold

Planting resistant crops is the ideal form of disease prevention, however, mutations can give rise to new strains of fungi that can overcome plant resistance. Although the disease cannot be stopped by removal of the alternate host, the life cycle is disrupted and the rate of mutation is decreased because of reduced genetic recombination. This allows resistance bred crops to remain effective for a longer period of time.

Macrocyclic Disease: Developing a management plan for this type of disease depends largely on whether the repeating stage (urediniospores) occur on the economically important host plant or the alternate host. For example, the repeating stage in white pine blister rust disease does not occur on white pines but on the alternate host, Ribes spp. During August and September Ribes spp. give rise to teliospores which infect white pines. Removal of the alternate host disrupts the life cycle of the rust fungi Cronartium ribicola, preventing the formation of basidiospores which infect the primary host. Although spores from white pines cannot infect other white pines, survival spores may overwinter on infected pines and reinfect Ribes spp. the following season. Infected tissue is removed from white pines and strict quarantines of Ribes spp. are maintained in high risk areas.

Gomphrena Caespitosa

(Gomphrena Caespitosa)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists