Galls are most commonly found near ground level on the roots and lower branches of the plants. As the galls enlarge, they become woody and hard. The outer layer turns brown and corky. The plant may be weakened and stunted with some branch or tip dieback. Symptoms may not develop immediately after infection. Galls grow most rapidly during the warm months of the year.

Signs of damage

Limit wounding of plant material. Avoid planting too deep. Avoid mounding soil up on newly planted trees. Keep crown of tree as dry as possible; Agrobacterium is favored by wet environments.

How to prevent

1. Prune out infected material. Crown gall cannot be eliminated from a shrub even though the infected plant may live for many years. To improve the appearance of the plant, prune out and destroy infected stems below the galled area. Sterilize the pruning shears after each cut with a mixture of one part bleach to nine parts water. 2. Destroy infected plants. Destroy the infected plant. The bacterium will remain in the soil so it is important to plant a resistant plant species. If the same species needs to be planted in the area, remove and replace the soil or consider soil sterilization. 3. Sterilize the soil. Soils known to be infected with crown gall bacteria can be sterilized using chemicals, heat, or antibiotics. This is not practical for most home gardeners. A biological control has been introduced using a bacterium, Agrobacterium radiobactor strain 84. This bacterium was discovered to be antagonistic to crown gall bacterium. It is available for use as a preplant treatment by dipping nursery stock in a suspension of the live bacteria in water. 4. Exclude the problem. When purchasing forsythia and euonymus plants, inspect them carefully for signs of galls. Do not purchase plants that show gall-forming symptoms. 5. Replant with a more resistant plant species. The following plants recommended by the University of Illinois show greater resistance to bacterial crown gall: barberry, hornbeam, true cedars, ginkgo, golden raintree, tulip tree, mahonia, spruce, linden, boxwood, catalpa, beech, holly, larch, magnolia, black gum, pine, Douglas fir, bald cypress, hemlock, birch, firethorn, redbud, smoke tree, sweet gum, deutzia, serviceberry, yellowwood, yew, and zelkova.

Treat

main

description

description_sm

description_sm_2

Crown gall

The first symptom is usually the appearance of minute yellow stippling on the upper surface of leaves that have mites on the undersides. Infested leaves generally become yellow and may drop off from plants. Red spider mites on the back of a leaf (left) and mite damage on a cucurbit leaf (right).

Host plant resistance can be a valuable component of an IPM system that is compatible with other control measures such as chemical control, and it makes beneficial natural enemies more effective. In many cases, even partially resistant cultivars are useful to enhance the efficacy of biocontrol agents.

Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas. On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs. Dust on leaves, branches and fruit encourages mites.

Tetranychidae

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

In the fruits, black or brown lesions (e.g., on pods, scab, and pitting) are common. Infection on the inflorescence produces blight, necrosis, and lesions with flecks and streaks. Infected leaves produce abnormal colors and patterns with dark, necrotic, angular, or irregular areas.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.  Water your plants with a drip sprinkler, as opposed to an overhead sprinkler.. Keep ripening fruits from touching the soil. Remember to rotate your plants every 2 to 3 years.

The best control products were Daconil Ultrex (chlorothalonil), Pageant (pyraclostrobin and boscalid) and Spectro 90WDG (chlorothalonil and thiophanate methyl). In addition, mancozeb (i.e., Dithane and Pentathlon) or copper were also very effective when used preventively.

Colletotrichum

Raised yellowish-orange, powdery pustules on the surface of infected foliage. Significant foliar dieback occurs on especially susceptible cultivars.

As with other fungus, daylily rust thrives in moisture. Use soaker hoses rather than overhead watering systems and water in the morning rather than late in the day or at night. This will cut down on the amount of time that the leaves remain wet.

Do not move or transport infected plant material. Carefully inspect incoming plant material for signs of rust. Fungicide applications are needed for disease management, especially on susceptible cultivars. Contact your local extension office for information on ratings of cultivar susceptibility and current fungicide control recommendations.

Daylily rust

Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

There is no cure for plants that already have damping off.

Rhizoctonia damping-off, blight and rot

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

The pathogen causes angular chlorotic lesions on the foliage. These lesions appear angular because they are bound by leaf veins. During humid conditions, inspection of the underside of the leaf reveals gray-brown to purplish-black fungal growth. This downy material is the sporulation of the pathogen. Magnification of the sporulation reveals the acutely and dichotomously branched sporangiophores bearing lemon-shaped sporangia. Eventually, leaves will turn necrotic and curl upwards. The disease is sometimes called wildfire because of how rapidly it progresses, as if the crop were burned by fire. Symptoms on watermelon and cantaloupe are different from on other cucurbits; leaf spots are typically not angular and turn brown to black in color. Often, an exaggerated upward leaf-curling will occur. Regardless of which cucurbit is involved, only the leaves are infected, not fruit, flowers, stems or roots. Disease of the leaves results in three major effects: 1. reduced yields, 2. a greater proportion of misshapen fruit, especially in cucumber, and 3. sunscalded fruit, due to increased exposure to direct sunlight, especially in watermelon and winter squash.

Early detection of downy mildew and immediate or preventative fungicide application is imperative for the control of this disease. A forecasting system exists to assist growers in timing their fungicide applications for maximum benefit. The system tracks outbreaks of the disease and provides a forecast or risk assessment for future outbreaks.

Resistant cultivars - Host resistance is an important tool in disease control and should be used whenever possible. Cultivars resistant to downy mildew have been developed for cucumber and cantaloupe and to a lesser extent for squash and pumpkin. Although cucumber downy mildew has been severe on resistant cultivars, these cultivars are more effective than susceptible cultivars in delaying infection. Chemical control - Chemical control is highly recommended because downy mildew is an aggressive and destructive disease and satisfactory control without the use of fungicides is unlikely. Both protectant and systemic products should be applied. Fungicides are most effective when applied prior to infection and reapplied at 5- to 7-day intervals. The following products have proven to be the most effective fungicides in cucumber downy mildew control in North Carolina trials conducted annually from 2004 to 2008: Presidio (fluopicolide, Valent), Ranman (cyazofamid, FMC), Previcur Flex (propamocarb, Bayer), Curzate (cymoxanil, DuPont), Tanos (famoxadone and cymoxanil, DuPont), and Gavel (zoxamide and mancozeb, Dow AgroSciences). These products should be applied in a program to prevent pathogen resistance, that is, rotated with fungicides of a different mode of action. Protectant fungicides such as chlorothalonil and mancozeb should be used as mixing partners. Вiological control - Although many biological control products have been evaluated for their ability to control downy mildew, none have proven effective and are not recommended for use.

Cucurbit downy mildew

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Mosaic symptoms are variable but commonly include irregular leaf mottling (light and dark green or yellow patches or streaks). Leaves are commonly stunted, curled, or puckered; veins may be lighter than normal or banded with dark green or yellow.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Monitor the rest of your plants closely, especially those that were located near infected plants.
Disinfect gardening tools after every use.

Control measures are the use of resistant varieties, the destruction of resistant vectors and weeds - pathogen reserves, removal of diseased plants and plant debris, crop rotation, sterilization of tools for plant care.

Mosaic virus (general)

General symptoms on the solanaceous crops and cucurbits include seed rot and seedling blight which discolors the roots and causes seedlings to topple over. Preemergence and postemergence damping-off are also possible symptoms that may occur.

Avoid overhead watering that can produce surface runoff, and consider slow drip irrigation instead. Hardy Phytophthora blight pathogens will survive in both hot summer and cold winter compost piles. Remove infected plants immediately, bag and dispose of infected debris, and always keep your garden clean.

Crop rotation may reduce the number of pathogens in the soil and, "a minimum of a 3 years crop rotation which alternates with non-host species is recommended to avoid build-up of P. capsici spores." Crops should also avoid conditions that would be conducive to the pathogen by using well drained soils and raised beds. As stated above, "Excess moisture is the single most important component to the initial infection and subsequent spreading of Phytophthora capsici. Overall, a study by K.H. Lamour and M.K. Hausbeck found that "crop rotation and mefenoxam are not likely to provide economic control". Mefenoxem is the active enantiomer contained in the racemic fungicide metalaxyl used to defend against Phytophthora capsici. Sexual recombination provides the genetic diversity to promote resistance towards fungicides in P. capsici. The failure of crop rotation as a means to control P. capsici may also be due to weeds playing the role of an alternative host in the absence of common hosts. According to a study done by the University of Florida, "In Florida, and perhaps elsewhere, weeds may contribute to pathogen survival in the absence of a host crop or when propagules may not readily survive in soil or plant debris." To avoid fruit rot of vegetable crops in the Cucurbitaceae, trellising cucurbit fruits and other ways to keep the fruit off the ground is a way to control secondary inoculants (zoospores) from physically being splashed from the soil onto the fruit. Control of Phytophthora capsici is easier in drier climates with less rainfall such as California. In these areas, it is important to practice placing drip irrigation emitters away from the stems of pepper plants in order to reduce the incidence of crown rot in peppers.

Phytophthora blight

The symptoms in the upper parts of the plants cannot be recognized in early stages of root infection.

Diagnosis of this disease is difficult and laborious because infected roots in the soil can only be detected by digging up the soil and observing the roots by eye, trapping mycelia around the infected roots by the bait twig method

Sordariomycetes

Yellowing (Chlorosis) occur in the newly emerging leaves instead of the older leaves and usually seen in the interveinal region Fruit would be of poor quality and quantity. Chlorosis occurs in younger leaves because iron is not a mobile element, and as such, the younger leaves cannot draw iron from other areas of the plant. Over time, the yellowing may even turn a pale white or the whole leaf may be affected. Iron deficient plants may overaccumulate heavy metals such as cadmium. Any plant may be affected, but raspberries and pears are particularly susceptible, as well as most acid-loving plants such as azaleas and camellias.

Prevention is the best control. Do not plant chlorosis-susceptible trees in soils having a high pH or in soils low in organic matter. If practical, replace species that are susceptible. When the leaves of plants become chlorotic, always determine the primary cause through a soil test.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II) sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

Iron deficiency

A sign of plant disease is physical evidence of the pathogen. For example, fungal fruiting bodies are a sign of disease. When you look at powdery mildew on a lilac leaf, you’re actually looking at the parasitic fungal disease organism itself (Microsphaera alni). Bacterial canker of stone fruits causes gummosis, a bacterial exudate emerging from the cankers. The thick, liquid exudate is primarily composed of bacteria and is a sign of the disease, although the canker itself is composed of plant tissue and is a symptom.

Good gardening habits and effective treatment help prevent, stop and control fungal disease
1. Start by planting healthy stock. 
2. Choose planting sites based on plant needs. 
3. Avoid overhead watering. 
4. Water early in the day. 
5. Don't crowd plants. 
6. Don't work a wet garden. 
7. Treat with a trusted, proven fungicide.

Baking soda, soap, and water is one of the safer ways to treat plant fungus issues, especially if the affected plants are inside your home. You really don't want to be spraying fungicide all over the inside of your home if you can avoid it!

Fungi

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Scales or shell-like bumps on plant stems and the underside of leaves. These are the outer coverings of scale insect. Large populations may result in poor growth. Some species of scale insect excrete honeydew, which accumulates on the upper leaf surfaces. This can be colonised by a black non-parasitic fungus known as sooty mould. Some scale insects deposit their eggs under a covering of white waxy fibres in early summer.

Check susceptible plants frequently from spring onwards so action can be taken before a damaging population has developed. When choosing control options you can minimise harm to non-target animals by starting with the methods in the non-pesticide control section. If this is not sufficient to reduce the damage to acceptable levels then you may choose to use pesticides. Within this group the shorter persistence pesticides (that are usually certified for organic growing) are likely to be less damaging to non-target wildlife than those with longer persistence and/or systemic action. Light infestations are of little consequence and can be tolerated. The best time to treat heavy attacks is when the more vulnerable nymphs are present, for many scales out of doors this is during mid-late summer. Scale insects on indoor plants can breed all year round and so there is no best time of year to treat. Note that dead scales can remain firmly attached to the plants. The success of any treatment can be gauged by the extent to which new growth remains free of scale insects.

To get rid of scale insects prune and dispose of infested branches, twigs and leaves. When scale numbers are low they may be rubbed or picked off of plants by hand. Dabbing individual pests with an alcohol-soaked cotton swab or neem-based leaf shine will also work when infestations are light.

Coccoidea

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Symptoms of infection include a downward curling of the leaves, leaf tip dieback, stunting, necrosis of growing leaf tips, sunken ‘chicken pox-like’ spots on leaves (often with a surrounding halo), stem death and yellowing. Since these symptoms are so generic, extreme caution must be taken when introducing new plants to your greenhouse. Infected plants can not be cured and not all hosts display visible symptoms.

Impatiens necrotic spot control focuses on excluding INSV and preventing its spread. Inspect any plants entering a greenhouse (e.g., new plant shipments, plants moved in from outdoors) for viral symptoms and thrips. Isolate new plants until they are determined to be thrips- and virus-free.

Once you suspect impatiens necrotic spot, treatment won't help – you must destroy the plant immediately. If many plants are infected, it's a good idea to contact your university extension office for testing to confirm the virus is present.

Impatiens necrotic spot virus

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Aphids

Southern blight on plants is most likely to occur in the summer months when the soil is warm and moist. Symptoms include discolored lower leaves, wilted foliage, and plant collapse and it usually results in the death of the plant.

Preventing entry of the pathogen. Use of healthy, certified seeds of known origin. Careful cleaning of agricultural tools. Avoiding environmental conditions that favour development of the pathogen. Irrigation management. Plant density and growth habitats.

Soil solarization and certain organic amendments (e.g. composted chicken manure and rye-vetch green manure), as well as introducing certain Trichoderma spp. have also been shown to reduce plant death and number of sclerotia produced in the field in tomatoes. In addition to these cultural methods, chemical methods (e.g. fungicides) can also be employed.These methods all disrupt the production of mycelium and sclerotia, thus reducing the spread of disease.

Southern blight

The earliest symptoms of rose rosette disease include a red pigmentation of the underside of leaf veins followed by sharply increased growth of vegetative shoots, which are typically more succulent than normal and colored in various shades of red. Leaves often become deformed, crinkled, and brittle with yellow mosaics and red pigmentation. As the disease progresses, leaves become very small, petioles are shortened, and most lateral buds grow, producing short, intensely red shoots. The disease causes the plant to be exceptionally susceptible to freeze damage. Symptoms on cultivated roses are typically less severe than on multiflora rose. Cultivated roses show symptoms of thickened, succulent stems and a proliferation of thorns. Symptoms can mimic some forms of herbicide damage.

Prune your roses in late winter or early spring. Do not use leaf blowers around your roses. Protect roses from prevailing winds with walls or other plants. Give your roses plenty of space. Control multiflora rose in your area.

1. Remove ornamental roses with symptoms. The entire plant including the roots should be removed and destroyed by burning or placing in a plastic bag. Care must be taken when working with diseased plants as you can facilitate spread of the mites that spreads the disease. Bag the plant before removal, cut it at ground level and then dig out the plant’s roots. Soil need not be removed. Clean tools and put on fresh clothing before moving to a disease-free plant or area. 2. Plant ornamental roses as far away as possible from known stands of multiflora rose. The general recommendation is maintain at least 300 feet between your roses and any stands of multiflora rose. Even greater distance is preferred especially if they are upwind of your desirable rose plants. 3. Control the disease by controlling the mite. Start mite control early by pruning your roses hard in late winter (back by 2/3) to remove as many overwintering mites as possible and then spray with horticultural oil to kill any remaining mites. Organic pesticides such as horticultural oils and insecticidal soap are recommended over other pesticides as these organic pesticides are less harmful to natural predators that feed on the problem mites. Apply weekly  during the months of June and July paying particular attention to the new growing tips where the mites will congregate. Refrain from using leaf blowers around roses as they can spread mites. 4. Help to isolate your roses. Do not plant roses too close together. With extra space between the plants mite movement can be reduced. Also, consider interplanting roses with other ornamental plants. 5. Using rose rosette disease as an IPM strategy. The multiflora rose is an exotic invasive species that is responsible for the degradation of millions of acres of farmland and recreational areas. Using the disease to control this invasive weed can cut costs and be considered environmentally friendly for reducing the amount of synthetic chemicals used. However, the disease also affects cultivated roses. One should be extremely cautious and good neighbor-minded when it comes to rose rosette disease.

Rose rosette disease

Cucurbits infected with tospovirus exhibit a variety of symptoms. Leaves can show bronzing to severe systemic chlorotic spotting. Other symptoms include leaf deformation, mosaic, die-back and overall plant stunting. Fruit symptoms can range from chlorotic ring spots on young fruit to necrotic lesions on older fruit.

Keep the greenhouse free of weeds inside and around the outside, since both thrips and tospoviruses are easily harbored in greenhouse weeds. When new cuttings or plugs arrive, check them for thrips or virus symptoms immediately. You can also employ virus indicator plants in the greenhouse.

Infected plants cannot be cured. Control measures aim to prevent or reduce the levels of disease in crops by removing or avoiding sources of virus infection and minimising spread by thrips.

Tospovirus

General symptoms can include one or more of the following symptoms: curling or cupped leaves, stunted growth, discolored leaves, or leaves with dead spots. The same herbicide may cause different symptoms on different plant species. Since herbicides do not leave a "calling card" like mites, insects, and diseases (but the damage they cause can be mistaken for herbicide damage), it is advised to rule these out first. Other disorders that produce symptoms that can resemble herbicide damage include virus diseases, adverse weather, salt damage, drought, soil compaction, misapplied fertilizers, root stress, and nutrient deficiencies. Excluding these as causes requires close examination of the site and attention to patterns. Is the pattern of damaged plants consistent with drifting spray? Is more than just one kind of plant affected? Did the symptoms appear within one or two days (in most cases) of the suspected application of an herbicide? Were any lawn weed control products used in the area, including weed and feed products containing an herbicide? The answer to these and other questions can help make a circumstantial case of herbicide damage.

Use shielded booms to minimize herbicide off-target movement. Use spray additives within label guidelines to reduce production of small spray droplets. This will result in less potential for drift. Avoid tank mix ammonium sulfate with volatile herbicides as ammonium sulfate increases volatility.

Organic strategies that help plants recover from herbicide damage are those that aid in maintaining plant vigor:  water during dry periods; fertilize with organic fertilizer according to a soil test report; and watch for and control any insect or disease problems using organic approaches.

Herbicide damage

Black mold is characterized by obvious lesions that appear on the surface of ripe fruit. Lesions are light to dark brown and vary from small flecks affecting only epidermal tissue to large, more or less circular, sunken lesions with decay extending into the carpel wall and often into the seed locule. During warm, humid weather the fungus may sporulate to form a black, velvetlike layer on the surface of the sunken lesions.

Select resistant varieties of plants/crops that are less susceptible to important pathogens. Pathogens reproduce at higher rates on susceptible varieties compared with resistant or partially resistant varieties. Cultural practices grapeCapitalize on cultural practices to reduce the pathogen population or create conditions less favorable for the pathogen to develop. When fewer non-chemical control methods (such as sanitation) are used, resistance is more likely to develop, or will develop more rapidly. Monitor and maintain agronomic factors such as soil moisture and crop nutrition, and manage other pests, to avoid crop stress throughout the season.Inadequate or excessive fertilization with nitrogen may increase disease incidence in some crops.  For example, early blight of potato and tomato and dollar spot of turfgrass are favored by nitrogen deficiency.  Alternatively, the severity of spring dead spot of bermudagrass and some foliar diseases of wheat is increased with intensive nitrogen fertilization. Excessive irrigation or frequent irrigation with small amounts of water increases the incidence of many diseases by promoting spread of the pathogen and extending periods of leaf wetness, and high soil moisture. Rotate crops to allow greater flexibility in choosing different tillage practices and/or the use of fungicides with different MOAs. Be aware that applying a fungicide unnecessarily to a crop in one year in the absence of fungus could result in undesirable effects on pathogens of rotational crops. NOTE: It is possible to rotate different crops between years and, yet, still use the same fungicide MOA to control the same disease. When one crop can serve as a source of inoculum for a subsequent crop, the alternation scheme among at-risk fungicides should be continued between successive crops such that the first at-risk fungicide applied to a crop belongs to a different group than the last at-risk fungicide applied to the previous crop.Be aware that resistant plant pathogens can spread from nearby fields, highways, railroads, or utility rights-of-way areas near your farm or treated site. Local and regional cooperation in resistance management is essential. Participate in Extension programs that conduct area-wide monitoring for the presence of disease pathogens and potential resistance development. Submit reports of fungicide control failures so that the possibility of resistance can be monitored and evaluated.

Fungicides are pesticides that kill or prevent the growth of fungi and their spores. They can be used to control fungi that damage plants, including rusts, mildews and blights. They might also be used to control mold and mildew in other settings.

Alternaria black molds and stem cankers

Hosta virus X does not kill the plants infected, but Hostas that have been infected do show a variety of other symptoms, such as: Ink-bleed, which makes the plant look discolored in certain spots, and this effect is generally centered on a vein. An example of this is shown in the photo in this article. Desiccation or Collapsed tissue, which can be signs of heavier infection, makes the plant look as if it is dried out. Mottling, which makes the plant appear blotchy. This is not always a symptom of HVX, and could be from another virus, but it should always be treated as an infected plant regardless. A Hosta may no longer express symptoms of the virus when it grows back in the Spring, even though it may have shown symptoms in a previous year. Nonetheless, the plant should still be considered infected with HVX.

The only way to eliminate the disease is to destroy infected plants (and any associated plant debris) by burning (where allowed by local ordinance) or landfilling. DO NOT compost hostas with HVX.

Once a Hosta plant is infected, it will be infected for the rest of its life. Any plant suspected of being infected should be burned if it is legal to do so. If it is not, then it should be tossed in the garbage, but infected Hosta plants should never be composted. If any plant in a batch shows symptoms, the entire batch should be considered infected and be destroyed. Once a plant has been removed, the spot occupied by the Hosta should be left empty for a long time to prevent the spread of the virus to a plant that replaces it. The virus primarily spreads through infected sap, so cutting multiple plants with the same tool can spread the virus. Animals that eat the plants may also spread the virus through sap by eating from an infected plant and then eating from an uninfected plant.

Hosta virus x

Most of the time, this pest is identified by the leaf miner damage. Frequently, it appears as yellow, squiggly lines in the leaves. This is where the leaf miner larva have literally bored their way through the leaf. Leaf miner damage can also appear as spots or blotches.

Pick off and destroy badly infested leaves in small gardens. The more healthy the plant, the less chance that leafminers will hurt it. Maintain plant health with organic fertilizers and proper watering to allow plants to outgrow and tolerate pest damage. Keep your soil alive by using compost and other soil amendments.

The most common method to rid plants of leaf miners is to spray general pesticide on the infected plants. The trick to this method of how to kill leaf miners is to spray at right time. If you spray too early or too late, the pesticide will not reach the leaf miner larva and will not kill the leaf miner flies.

Leaf miners

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

Alternaria symptoms once infection begins include small, dark, circular spots that regularly reach ½ inch (1 cm.) in diameter.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging. Conventional gardeners can use chlorothanil, fludioxinil, imazalil, iprodine, maneb, mancozeb, or thiram on plants listed on the label of their chemical of choice, but should still strive for prevention in areas with known Alternaria pathogens.

Alternaria

The term “abiotic disorders” refers to a wide array of plant problems. We use the word “abiotic” to indicate that the symptom is not caused by a biological agent such as an insect, mite or pathogen.

Examine where symptoms first appear on a plant—on new leaves, old leaves or all over? Note the pattern of any discolouration or yellowing—is it all over, between the veins or around the edges? If only the veins are yellow, deficiency is probably not involved. Note general patterns rather than looking at Individual plants—are the symptoms distributed throughout a group of plants of the same type growing together? In the case of a deficiency all of the plants should be similarly effected, although distribution will depend on past treatments applied to the soil. Soil analysis, such as determining pH, can help to confirm the presence of physiological disorders. Considering recent conditions, such as heavy rains, dry spells, frosts, etc., may also help to determine the cause of plant disorders.

Testing soil and fertilizing accordingly. Collecting and testing samples to identify and treat pests or diseases. Aerating compacted soil with an air tool to “fluff” it without damaging roots. Pruning to help a tree recover from damage caused by storms, road salt, or extreme temperatures.

Abiotic

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

Brown, yellow, gray, or straw-colored needles at tip of current season's growth; needles usually stunted and shoot may curl. Branch dieback. Small, black fruiting bodies on needles, cones, or shoot tissue. Cankers on stems or branches. Oozing resin that adheres to blighted needles.

Preventing the initial infection is a better strategy than attempting to cure a diseased tree. The first line of defense in preventing disease is planting disease free stock, planting in a disease free area, and selecting a disease resistant species. Beyond the selection of clean, resistant stock and planting location, trees that have proper water and nutrient management are healthier and less susceptible to Diplodia tip blight. Controlling wood boring insects that create wounds for Diplodia to exploit, is another cultural practice that can prevent disease. Poor airflow and high humidity are conditions that favor disease development; keeping grass and weeds trimmed down at the base of the tree allows for better airflow and can limit disease development. Once a tree is diseased, the goal is to limit the amount of inoculum present. The blighted needles and cones will have the pycnidia survival structures that contain thousands of spores. Remove debris from the base of the tree and destroy. During dry weather (not during Spring or early Summer), cut away infected shoots, cones, and branches. Sanitary techniques like sanitizing pruning tools between each cut will prevent further spread of the disease.

When disease pressure is high, chemical controls is advised. First, spray should occur early spring at candle elongation. Repeated sprays should occur every two weeks until needles reach full size. Fungicides containing the following active ingredients have been shown to be efficacious: chlorothalonil, methyl, thiophanate-methyl, mancozeb, and copper hydroxide with mancozeb. Always read and follow the label.

Sphaeropsis blight

Leaves - abnormal colours, abnormal leaf fall, abnormal leaf fall, internal feeding, wilting.

Avoid heat sources such as radiators. Protect the plant from direct sunlight during the hotter hours if placed behind a window. The temperature must never drop below 60°F (15°C).

Maintain a regular watering schedule. Water stephanotis regularly during the first growing season. Fertilize with a balanced mix. Scatter about 1/4 cup of dry fertilizer on the soil around the plant in early spring.  Prune in late winter or early spring.

Stephanitis

Yellowing and shrivelling of lower leaves. Some or all of the plant suddenly wilts, especially in hot weather. Plants may recover in cooler or wetter conditions. Brown or black streaks in the tissue under the bark. These are visible as a circle or part-circle of brown marks, if the stem is cut across transversely, or as brown lines if it is cut lengthways. In woody plants the marks are often in the outer (most recent) growth ring, although older infections that were not fatal may have left similar marks in older, inner growth rings. However, a few plants, such as chrysanthemums and roses, don't usually show these marks when infected. Branch dieback is a common symptom in trees and shrubs. Sometimes only part of the plant may wilt and dead branches may indicate infections which occurred in previous years.

Water the plant regularly, and when possible, provide afternoon shade. Fertilize on schedule, using a low-nitrogen, high-phosphorus fertilizer. Prune off dead and dying branches. You can often get rid of the verticillium wilt fungus in the soil by solarization.

There is no effective treatment for verticillium wilt. For affected vegetables, remove and dispose of the plant; don't compost it. For landscape plants, prune out affected branches and dispose of them immediately. Do not use infected wood for chips for landscape mulch.

Verticillium wilt

Primary symptoms of infection include wilting leaves, blight of young shoots, sunken and darkened areas of stems with possible sap or resin flow, cankering on larger stems and branches, browning of the vascular tissue when bark is scraped away, and canopy dieback.

Avoid planting sites prone to spring frosts and use fertilization, irrigation, and weed control practices that discourage late-season growth and promote early hardening off. Sprays for mummy berry and botrytis may help, particularly during flowering.

Prune and discard all blighted stems and cankered branches from the canopy. For trees with thin bark and dense canopies (e.g. Japanese maple and kousa dogwood), annual sanitation pruning of dead stems, especially on interior canopy branches, can help to avoid disease outbreaks in the future.

Phomopsis cankers and blights

The most common sign of anthracnose is the spots that appear on new leaves. These spots are irregularly shaped and are tan, brown, or black in color. In some trees, these spots appear all over the leaves and on others they may appear along the leaf veins.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.

Anthracnose diseases typically do not kill the host directly, however, repeated infections on woody plants over a period of years may lead to a general decline and dieback. Control of anthracnose diseases becomes important when the host is economically important and the goal is production for fruit or lumber. Otherwise, anthracnose diseases generally go unattended and raise concern only when premature leaf drop calls attention to the situation.

Anthracnose

Typical symptoms of potassium deficiency in plants include brown scorching and curling of leaf tips as well as chlorosis (yellowing) between leaf veins. Purple spots may also appear on the leaf undersides. Plant growth, root development, and seed and fruit development are usually reduced in potassium-deficient plants. Often, potassium deficiency symptoms first appear on older (lower) leaves because potassium is a mobile nutrient, meaning that a plant can allocate potassium to younger leaves when it is K deficient. Deficient plants may be more prone to frost damage and disease, and their symptoms can often be confused with wind scorch or drought. The deficiency is most common in several important fruit and vegetable crops; notably potatoes, brassicas, tomatoes, apples, currants, gooseberries, and raspberries. Sugar beets, cereals, and clover are also commonly affected.

The best way to prevent or solve this deficiency, is to add a potassium fertilizer to the plant. If necessary, it can be added to the nutritional feeding schedule if the shortage keeps occurring.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, vermiculite, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content but must be used cautiously due its effect on pH level. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Potassium deficiency

Loss of chlorophyll, with the resulting yellowing of the leaves is the most obvious sign of senescence and in some cases, as seen in Figure 1a and c, the additional synthesis of anthocyanins during senescence results in dramatic orange, red and even purple coloration.

Leaf senescence occurs when the leaf is no longer of use to the plant. It is a normal aging process.

Senescence

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

Stems will be leggy or stretched out. Leaves turn yellow. Leaves are too small.

Arrange the light sources so that the plant receives the required number of photons.

Make sure your plant gets not too much/not too little light.

Light-related issue

The leaves become narrower and longer, and with severe damage, the plants become chlorotic and die.

There is no cure for nectria canker, so it is important to take steps to prevent it affecting young and vulnerable trees. Pruning injuries can be a major source of infection, so avoid pruning trees in the fall, especially in wet conditions. Restrict pruning to dry weather and remove any branches or stems that have been infected with the fungus.

Freezing damage is another important way in which trees get infected. For young transplants, providing protection from freezing can prevent the disease. Avoid other types of injury and keep your trees healthy to minimize the risks from nectria infection. This means being careful with the lawnmower around trees, preventing or managing pests, and providing adequate water and nutrients.

Nectriaceae

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

The spores are hyaline, of various shapes, and are released through a circular apical pore.

To prevent powdery mildew from forming in the first place, avoid low-temperature, high-humidity environments. Do not crowd plants. Do not grow susceptible plants in the shade. Water the soil, not the plants.

Use sulfur-containing organic fungicides as both preventive and treatment for existing infections.

Leotiomycetes

These insects are so small (a few millimeters in length), that winds can transport them for fairly long distances. They are often green, but might be red or brown, as well. They move quite slowly and cannot jump or hop. Aphids excrete a sugary liquid called honeydew, because the plant sap from which they feed contains excess carbohydrates relative to its low protein content. To satisfy their protein needs, they absorb large amounts of sap and excrete the excess carbohydrates. Honeydew is used as food by ants, honeybees, and many other insects.

Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before.

Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging. You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap.

Aphididae

Symptoms of Cercospora leaf spot first appear as individual, circular spots that are tan to light brown with reddish purple borders. As the disease progresses, individual spots coalesce. Heavily infected leaves first become yellow and eventually turn brown and necrotic.

Avoid overwatering or watering in the late evening to reduce free moisture. Avoid overhead watering where the water can dislodge and disperse spores to uninfected plants. Space plants to encourage air movement and reduce high humidity levels.

For the most part, treating Cercospora leaf spot means preventing the fungi from infecting your plants in the first place.

Cercospora leaf spot

Leaves Go Yellow and Fall Off. Dropping Old and New Leaves Alike.  Wilting, Limp Leaves. Leaves Turning Splotchy Black or Dark Brown.  Mushy Roots Mean Overwatering.  An Overwatered Succulent Will Rot and Turn Mushy.

Soaking the ground for a longer period of time less often, and not watering by hand but using a sprinkler or soaker hose, is the way to handle that situation. Mulch around the plant will also help keep a more even level of moisture.

Move your plant to a shady area even if it is a full-sun plant. Remove any dead or dying leaves. These should be easily recognizable. Check your pot for proper drainage and, if possible, create additional air space around the roots. This will allow oxygen to reach the root zone. Remove any dead or dying roots and keep only the roots that are healthy. Water only when the soil is dry to the touch, but do not let it get too dry. You should also seize all fertilization at this point until the plant is healthy again. Treat with a fungicide.

Water excess and/or uneven watering

Bacterial leaf spots show as necrotic, circular or angular lesions and may have a yellowish outline or halo. Early symptoms of bacterial leaf spots show on older leaves and lesions appear water-soaked. Bacterial spots affecting dicytyledounous plants that have net-like leaf veins sometimes take a more angular shape as they are restricted by the large leaf veins. Bacterial spots on monocotyledonous plants with parallel leaf veins have a streak or striped appearance. The most obvious symptom of bacterial leaf spots are the blackening of the spots after infection. Eventually older lesions dry out and become papery in texture. Bacterial spots can also produce white, yellow, light cream or silver bacterial exudate depending on the type of bacteria, which may ooze from splitting lesions and/or from the underside of the spots. Bacterial leaf spots caused by Pseudomonas show red-brown spots which can distort the infected leaves, whilst those caused by Xanthomonas are angular or circular in shape outlined with a yellow halo.

Prevention of leaf spot disease includes variety selection, crop rotations, plant hygiene and fungicide use for seeds and foliage. To stop the spread of pathogens good sanitation is key as well as the avoidance of handling plants when wet, planting pathogen-free and resistant cultivars and moving out infected plants. Reducing the humidity around plants and in greenhouses by good plant spacing for air circulation, and watering early in the day can also help prevent leaf spot disease. Disinfection of tools and washing of hands is important when handling infected plants. Susceptibility to leaf spot disease can occur due to insufficient or excessive fertilising of plants. Checking plants periodically for any signs and symptoms of disease is also good practice. Avoiding overhead watering and increasing air circulation by pruning plants should be done to prevent humid conditions. Collecting and removing fallen leaves is important in reducing the amount of pathogenic agents on the ground to prevent dispersal of disease.

Certain chemicals are used to treat leaf spot disease, such as the Bordeaux mixture, the first fungicide to have been developed, which treats many fungal and bacterial leaf spots. Other fungicides such as zineb, chlorothalonil and Captan, also treat leaf spot disease and Benomyl specifically treats Cercospora leaf spots, cherry leaf spot and black spot of roses. Thiabendazole is used to treat leaf spot diseases of turf and ornamentals. Both fenarimol and nuarimol are pyrimidines that also treats leaf spot disease. More chemicals include Triazoles an organosphosphate fungicide, Imazalil, Procholora and Fentin hydroxide. Registered fungicides in use are thiophanate methyl, chlorothalonil, ferban and mancozeb.

Moehringia Ciliata

(Moehringia Ciliata)

What is the plant

Planting

Water

Soil

Temperature

Sunlight

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists