Yellowing between the leaf veins, sometimes with reddish brown tints and early leaf fall. Magnesium deficiency is common in tomatoes, apples, grape vines, raspberries, roses and rhododendrons.

Signs of damage

Reducing or avoiding calcium-rich foods two hours before or after eating magnesium-rich foods. avoiding high-dose zinc supplements. treating vitamin D deficiency. eating raw vegetables instead of cooking them. quitting smoking.

How to prevent

Epsom salts dissolved in water and sprayed onto foliage and applied around the roots will cure magnesium deficiency. In future, feed plants in spring with balanced plant food that contains magnesium. For rhododendrons and azaleas, feed with a plant food specifically formulated for lime-hating or ericaceous plants.

Treat

main

description

description_sm

description_sm_2

Magnesium deficiency

Some of the most common symptoms of nutrient deficiencies are chlorosis, foliage color changes, overall plant stunting and sometimes necrosis. All can be caused by one or more deficiencies.

Monitor pH Levels – There are lots of things that can cause a hydroponic nutrient solution to drift outside of the ideal range of about 5.6. Usually, if a nutrient solution is left unmonitored for too long, it can start drifting outside of this range because it gets too dense in raw, use nutrients. Other times, it might start becoming too acid or too alkaline when you add new hydroponic nutrients or transfer your plants to a new medium. Since pH levels can change very rapidly, it is important to check your pH level daily. The longer your nutrient solution spends outside of this ideal range, the greater the chance that your flowers or vegetables will suffer a plant deficiency. Use a pharmaceutical grade pH adjustment product designed specifically for hydroponics to make the necessary adjustments. This way you have less of a chance of accidentally over compensating your pH adjustments.  Keep Temperature Levels Stable – Your nutrient solution should be fairly cool to temperate, somewhere in the range of sixty six to seventy one degrees Fahrenheit. You should be particularly aware of this if you happen to live in an unusually warm or cold part of the world. If you feel it is necessary to prevent plant deficiency, take extra steps insulate your grow room against outside elements. You should also avoid placing your reservoir directly on the ground in your grow room, as the floor can be very cool, which can transfer to the reservoir and cause a plant deficiency.

When the temperature of your indoor garden or the nutrient solution falls below 55 degrees Fahrenheit, plants take up less phosphorus than they need. If you've determined that the temperature is not the problem, treat your plants to bone meal, a supplement that's rich in phosphorus.

Nutrient deficiency

Southern blight on plants is most likely to occur in the summer months when the soil is warm and moist. Symptoms include discolored lower leaves, wilted foliage, and plant collapse and it usually results in the death of the plant.

Preventing entry of the pathogen. Use of healthy, certified seeds of known origin. Careful cleaning of agricultural tools. Avoiding environmental conditions that favour development of the pathogen. Irrigation management. Plant density and growth habitats.

Soil solarization and certain organic amendments (e.g. composted chicken manure and rye-vetch green manure), as well as introducing certain Trichoderma spp. have also been shown to reduce plant death and number of sclerotia produced in the field in tomatoes. In addition to these cultural methods, chemical methods (e.g. fungicides) can also be employed.These methods all disrupt the production of mycelium and sclerotia, thus reducing the spread of disease.

Southern blight

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

If your plant is not getting enough light, the most common sign is the yellowing and dropping of leaves, stunted leaf growth, elongated stems, and a dull-green color. If your plant is getting too much light, then its leaves will have singed tips, burned patches, or will be falling off (yikes!).

You can prevent this from happening by turning the plant once a week or every time you water. This ensure all leaves are exposed to roughly the same amount of light. All plants will bend towards their light source, and we recommend turning all your houseplants at least once a week to prevent “one-sided” growth.

Most plants will survive illuminance ten times lower than listed below but will not grow as well or bloom. Most plants grown as houseplants are selected because they are already adapted to growing at typical house temperatures, between 15° and 25°C. Exceptions do occur, and some plants require chilling periods at lower temperatures (down to 5° or 10°) in winter when less light is available. Houseplants are generally grown in specialized soils called potting compost or potting soil, not in local natural soil. A good potting compost mixture includes soil conditioners to provide the plant with nutrients, support, adequate drainage, and proper aeration. Most potting composts contain a combination of peat and vermiculite or perlite. Concern over environmental damage to peat bogs, however, is leading to the replacement of peat by coir (coconut fibre), which is a sustainable resource. Sterilised soil can also be used.

Lack of light

Phyllosticta causes circular leaf spots with brown/reddish borders. The spots can be really large covering a large area of the leaf. Initial symptoms include small watersoaked regions on the leaves. lesions become more apparent with a ring-like pattern at alter stages.

Repeated applications of fungicides such as Dithane M45, Captan, Ferbam, Mancozeb or thiophanate-methylbased treatments will help control infection levels and can prevent new infections in healthy plants, but it is difficult if not impossible to completely eradicate the fungus in an infected host plant.

Remove and dispose of affected leaves from infected plants to keep the fungal spores from spreading into the growing environment. Some growers have reported covering the mature lesions with clear nail polish to prevent the dissemination of spores.

Phyllosticta leaf spots

Typical symptoms of potassium deficiency in plants include brown scorching and curling of leaf tips as well as chlorosis (yellowing) between leaf veins. Purple spots may also appear on the leaf undersides. Plant growth, root development, and seed and fruit development are usually reduced in potassium-deficient plants. Often, potassium deficiency symptoms first appear on older (lower) leaves because potassium is a mobile nutrient, meaning that a plant can allocate potassium to younger leaves when it is K deficient. Deficient plants may be more prone to frost damage and disease, and their symptoms can often be confused with wind scorch or drought. The deficiency is most common in several important fruit and vegetable crops; notably potatoes, brassicas, tomatoes, apples, currants, gooseberries, and raspberries. Sugar beets, cereals, and clover are also commonly affected.

The best way to prevent or solve this deficiency, is to add a potassium fertilizer to the plant. If necessary, it can be added to the nutritional feeding schedule if the shortage keeps occurring.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, vermiculite, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content but must be used cautiously due its effect on pH level. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Potassium deficiency

Primary symptoms of infection include wilting leaves, blight of young shoots, sunken and darkened areas of stems with possible sap or resin flow, cankering on larger stems and branches, browning of the vascular tissue when bark is scraped away, and canopy dieback.

Avoid planting sites prone to spring frosts and use fertilization, irrigation, and weed control practices that discourage late-season growth and promote early hardening off. Sprays for mummy berry and botrytis may help, particularly during flowering.

Prune and discard all blighted stems and cankered branches from the canopy. For trees with thin bark and dense canopies (e.g. Japanese maple and kousa dogwood), annual sanitation pruning of dead stems, especially on interior canopy branches, can help to avoid disease outbreaks in the future.

Phomopsis cankers and blights

The symptoms in the upper parts of the plants cannot be recognized in early stages of root infection.

Diagnosis of this disease is difficult and laborious because infected roots in the soil can only be detected by digging up the soil and observing the roots by eye, trapping mycelia around the infected roots by the bait twig method

Sordariomycetes

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Planting resistant crops is the ideal form of disease prevention, however, mutations can give rise to new strains of fungi that can overcome plant resistance. Although the disease cannot be stopped by removal of the alternate host, the life cycle is disrupted and the rate of mutation is decreased because of reduced genetic recombination. This allows resistance bred crops to remain effective for a longer period of time.

Macrocyclic Disease: Developing a management plan for this type of disease depends largely on whether the repeating stage (urediniospores) occur on the economically important host plant or the alternate host. For example, the repeating stage in white pine blister rust disease does not occur on white pines but on the alternate host, Ribes spp. During August and September Ribes spp. give rise to teliospores which infect white pines. Removal of the alternate host disrupts the life cycle of the rust fungi Cronartium ribicola, preventing the formation of basidiospores which infect the primary host. Although spores from white pines cannot infect other white pines, survival spores may overwinter on infected pines and reinfect Ribes spp. the following season. Infected tissue is removed from white pines and strict quarantines of Ribes spp. are maintained in high risk areas.

Pucciniales

Brown, yellow, gray, or straw-colored needles at tip of current season's growth; needles usually stunted and shoot may curl. Branch dieback. Small, black fruiting bodies on needles, cones, or shoot tissue. Cankers on stems or branches. Oozing resin that adheres to blighted needles.

Preventing the initial infection is a better strategy than attempting to cure a diseased tree. The first line of defense in preventing disease is planting disease free stock, planting in a disease free area, and selecting a disease resistant species. Beyond the selection of clean, resistant stock and planting location, trees that have proper water and nutrient management are healthier and less susceptible to Diplodia tip blight. Controlling wood boring insects that create wounds for Diplodia to exploit, is another cultural practice that can prevent disease. Poor airflow and high humidity are conditions that favor disease development; keeping grass and weeds trimmed down at the base of the tree allows for better airflow and can limit disease development. Once a tree is diseased, the goal is to limit the amount of inoculum present. The blighted needles and cones will have the pycnidia survival structures that contain thousands of spores. Remove debris from the base of the tree and destroy. During dry weather (not during Spring or early Summer), cut away infected shoots, cones, and branches. Sanitary techniques like sanitizing pruning tools between each cut will prevent further spread of the disease.

When disease pressure is high, chemical controls is advised. First, spray should occur early spring at candle elongation. Repeated sprays should occur every two weeks until needles reach full size. Fungicides containing the following active ingredients have been shown to be efficacious: chlorothalonil, methyl, thiophanate-methyl, mancozeb, and copper hydroxide with mancozeb. Always read and follow the label.

Sphaeropsis blight

The spores are hyaline, of various shapes, and are released through a circular apical pore.

To prevent powdery mildew from forming in the first place, avoid low-temperature, high-humidity environments. Do not crowd plants. Do not grow susceptible plants in the shade. Water the soil, not the plants.

Use sulfur-containing organic fungicides as both preventive and treatment for existing infections.

Leotiomycetes

Common, Persian, Chinese, and Japanese lilac leaves develop round to irregularly shaped brown spots with yellow halos. These spots enlarge and blight entire leaves. Succulent twigs are girdled, killed, and turn black.

1. Exclusion or eradication of the pathogen (quarantine and use of pathogen-tested seeds and propagated materials)
2. Use of clean transplants.
3. Monitor crops regularly and use predictive models.
4. Reduce the pathogen levels by crop rotation.
5. Remove weeds and incorporate crop residues that can host the disease.

The most common strategy for controlling diseases caused by Pseudomonas syringae is, as it has been for more than 5 decades, to spray bactericides. These mainly include a variety of copper compounds or other heavy metals, with or without various combinations of fungicides or other pest-control chemicals.

Pseudomonas

Death can occur with a sudden browning of the leaves, as with the red oaks, or over time with gradual leaf loss. P. ramorum infection in twigs can lead to shoot tip dieback and wilting. Shoot tip wilting, or flagging, can be useful in identifying trees that are infected but not showing bleeding symptoms.

Truly, the best defenses against Sudden Oak Death include avoiding moving the host plant material long distances, knowing exactly where the disease is, and avoiding traveling in infected areas.

There is no treatment for sudden oak death. A fungicide can be used to allay some of the symptoms but it cannot be cured. Preventative actions are the most successful, by creating barriers between infected and non-infected areas and removing infected plants after they've been diagnosed.

Sudden oak death

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Leaves Go Yellow and Fall Off. Dropping Old and New Leaves Alike.  Wilting, Limp Leaves. Leaves Turning Splotchy Black or Dark Brown.  Mushy Roots Mean Overwatering.  An Overwatered Succulent Will Rot and Turn Mushy.

Soaking the ground for a longer period of time less often, and not watering by hand but using a sprinkler or soaker hose, is the way to handle that situation. Mulch around the plant will also help keep a more even level of moisture.

Move your plant to a shady area even if it is a full-sun plant. Remove any dead or dying leaves. These should be easily recognizable. Check your pot for proper drainage and, if possible, create additional air space around the roots. This will allow oxygen to reach the root zone. Remove any dead or dying roots and keep only the roots that are healthy. Water only when the soil is dry to the touch, but do not let it get too dry. You should also seize all fertilization at this point until the plant is healthy again. Treat with a fungicide.

Water excess and/or uneven watering

The first symptom is usually the appearance of minute yellow stippling on the upper surface of leaves that have mites on the undersides. Infested leaves generally become yellow and may drop off from plants. Red spider mites on the back of a leaf (left) and mite damage on a cucurbit leaf (right).

Host plant resistance can be a valuable component of an IPM system that is compatible with other control measures such as chemical control, and it makes beneficial natural enemies more effective. In many cases, even partially resistant cultivars are useful to enhance the efficacy of biocontrol agents.

Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas. On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs. Dust on leaves, branches and fruit encourages mites.

Tetranychidae

Lower leaves are yellow. Plant looks wilted Roots will be rotting or stunted. No new growth. Young leaves will turn brown. Soil will appear green (which is algae)

Rainwater harvesting and recycled wastewater also allow to reduce scarcity and ease pressures on groundwater and other natural water bodies. Groundwater recharge, that allows water moving from surface water to groundwater, is a well-known process to prevent water scarcity.

The provision of water treatment chemicals ensures the provision of safe water.

Water-related issue

These weevils are pests of over 100 plants, ranging from weeds to shrubs to greenhouse plants. Some of the common host plants in Maryland include azalea, holly, strawberry, rhododendron, yew, and grape.
When weevils are present in low numbers only a few notches on the edges of leaves will be apparent. If many weevils are present, the leaves are often scalloped and left with only the main vein.
The grubs are highly destructive to plants. When small, grubs consume feeder roots. Larger grubs feed on larger roots, stripping the bark and sometimes girdling the plant crown. This blocks the flow of water and nutrients to the foliage.
Infested plants have stunted growth; leaves turn yellow and then wilt.

1 Quarantine or dispose of any soil from pots where vine weevil have been found. Don't reuse this or throw on the garden because it may still contain vine weevil eggs, larvae or pupae.
2Remove plants that have unexplainably wilted and died and examine the roots. If they appear eaten, then search the surrounding soil and destroy any vine weevil larvae that you find.
3 Look for leaf edge notching on garden plants to indicate where adult vine weevils are feeding. Then treat the surrounding soil with nematodes during the summer months to control any larvae that appear.
4 Avoid using broad spectrum insecticides which will kill soil-dwelling predators of vine weevil larvae, such as centipedes and carab beetles.
5 Encourage insectivorous birds by hanging feeders in winter and provide nesting boxes in spring.

- Check plants every week to prevent weevil infestations becoming out of control and deal with early signs immediately.
- Remove and destroy newly-hatched adults to reduce the numbers of eggs laid in the soil. This is best done at night, with a torch, when the weevils are most active.
- Use netting and fleeces to stop adults moving between plants and laying eggs within pots.
-Replant perennial pot plants in the spring and look for and remove any vine weevil larvae you find.
- Use commercially available nematodes (microscopic worm-like creatures) Steinernema kraussei and Heterorhabditis megidis that can be watered into pots or surrounding soil to control vine weevil larvae. The nematodes seek out and kill vine weevils.
- BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
- Fast-acting crack and crevice sprays, like Don’t Bug Me, can be used around windows, doors and vents to prevent adult weevils from entering structures.
- Least-toxic botanical insecticides should be used as a last resort. Derived from plants which have insecticidal properties, these natural pesticides have fewer harmful side effects than synthetic chemicals and break down more quickly in the environment.

Weevils

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Thysanoptera

Wilted, downward-hanging foliage is often the first obvious symptom of Armillaria root rot. Other symptoms include foliage yellowing, leaf drop, and dieback of upper limbs. During the rainy fall and winter, groups of short-lived mushrooms often grow around the base of Armillaria-infected trees.

Cultural practices can also be effective for preventing the spread of Armillaria. High temperatures interfere with the progression of this disease; if soil temperatures reach 79 °F (26 °C), then the growth of Armillaria in the soil will be limited. Using collar excavation to expose primary roots directly below the crown to the continuous cycle of solar heating and air may reduce the colonization from Armillaria in trees that are already infected. This is called root collar excavation (RCE), and while it has been applied to citrus orchards and grapevines, this method has high labor costs and involvement due to the difficulty of carefully exposing these primary roots.

Sadly, there is no absolute treatment for Armillaria root rot. The disease can be managed by the consistent removal of dead trees and infected stumps. Armillaria requires consistent moisture to survive, and in citrus groves, excavation around the root crown has been an effective deterrent but not an ultimate cure.

Armillaria root rot

All members of the class produce basidiocarps which range in size from tiny cups a few millimeters across to a giant polypore (Phellinus ellipsoideus) greater than several meters across and weigh up to 500 kilograms (1,100 lb). Agaricomycetes produce mushrooms, and are therefore the most familiar and conspicuous of all Fungi. Other Fungi produce macroscopic fruiting bodies as well, but the diversity of forms in the Agaricomycetes is unmatched.

A proven fungicide that prevents disease from becoming active and treats it quickly is a crucial part of your protection plan. GardenTech® Daconil® Fungicide, with the active ingredient chlorothalonil, provides protection against a broad spectrum of fungal pathogens and simplifies controlling fungal disease from your garden.

Used as a preventive and an active treatment, Daconil® Fungicide can prevent, control or stop more than 65 types of fungal disease on flowers, vegetables, shrubs, fruit and shade trees.

Agaricomycetes

Loss of chlorophyll, with the resulting yellowing of the leaves is the most obvious sign of senescence and in some cases, as seen in Figure 1a and c, the additional synthesis of anthocyanins during senescence results in dramatic orange, red and even purple coloration.

Leaf senescence occurs when the leaf is no longer of use to the plant. It is a normal aging process.

Senescence

Alternaria symptoms once infection begins include small, dark, circular spots that regularly reach ½ inch (1 cm.) in diameter.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging. Conventional gardeners can use chlorothanil, fludioxinil, imazalil, iprodine, maneb, mancozeb, or thiram on plants listed on the label of their chemical of choice, but should still strive for prevention in areas with known Alternaria pathogens.

Alternaria

Leaf curl and distortion. Leaf yellowing or stippling. Necrotic leaf spots. White sporulation of the pathogen on lower leaf surface. Defoliation.

Use hygiene measures. Start clean, remove crop residues and prevent splashing water.

One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Peronosporea

The leaves become narrower and longer, and with severe damage, the plants become chlorotic and die.

There is no cure for nectria canker, so it is important to take steps to prevent it affecting young and vulnerable trees. Pruning injuries can be a major source of infection, so avoid pruning trees in the fall, especially in wet conditions. Restrict pruning to dry weather and remove any branches or stems that have been infected with the fungus.

Freezing damage is another important way in which trees get infected. For young transplants, providing protection from freezing can prevent the disease. Avoid other types of injury and keep your trees healthy to minimize the risks from nectria infection. This means being careful with the lawnmower around trees, preventing or managing pests, and providing adequate water and nutrients.

Nectriaceae

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Aphids

Black mold is characterized by obvious lesions that appear on the surface of ripe fruit. Lesions are light to dark brown and vary from small flecks affecting only epidermal tissue to large, more or less circular, sunken lesions with decay extending into the carpel wall and often into the seed locule. During warm, humid weather the fungus may sporulate to form a black, velvetlike layer on the surface of the sunken lesions.

Select resistant varieties of plants/crops that are less susceptible to important pathogens. Pathogens reproduce at higher rates on susceptible varieties compared with resistant or partially resistant varieties. Cultural practices grapeCapitalize on cultural practices to reduce the pathogen population or create conditions less favorable for the pathogen to develop. When fewer non-chemical control methods (such as sanitation) are used, resistance is more likely to develop, or will develop more rapidly. Monitor and maintain agronomic factors such as soil moisture and crop nutrition, and manage other pests, to avoid crop stress throughout the season.Inadequate or excessive fertilization with nitrogen may increase disease incidence in some crops.  For example, early blight of potato and tomato and dollar spot of turfgrass are favored by nitrogen deficiency.  Alternatively, the severity of spring dead spot of bermudagrass and some foliar diseases of wheat is increased with intensive nitrogen fertilization. Excessive irrigation or frequent irrigation with small amounts of water increases the incidence of many diseases by promoting spread of the pathogen and extending periods of leaf wetness, and high soil moisture. Rotate crops to allow greater flexibility in choosing different tillage practices and/or the use of fungicides with different MOAs. Be aware that applying a fungicide unnecessarily to a crop in one year in the absence of fungus could result in undesirable effects on pathogens of rotational crops. NOTE: It is possible to rotate different crops between years and, yet, still use the same fungicide MOA to control the same disease. When one crop can serve as a source of inoculum for a subsequent crop, the alternation scheme among at-risk fungicides should be continued between successive crops such that the first at-risk fungicide applied to a crop belongs to a different group than the last at-risk fungicide applied to the previous crop.Be aware that resistant plant pathogens can spread from nearby fields, highways, railroads, or utility rights-of-way areas near your farm or treated site. Local and regional cooperation in resistance management is essential. Participate in Extension programs that conduct area-wide monitoring for the presence of disease pathogens and potential resistance development. Submit reports of fungicide control failures so that the possibility of resistance can be monitored and evaluated.

Fungicides are pesticides that kill or prevent the growth of fungi and their spores. They can be used to control fungi that damage plants, including rusts, mildews and blights. They might also be used to control mold and mildew in other settings.

Alternaria black molds and stem cankers

Canker, plant disease, caused by numerous species of fungi and bacteria, that occurs primarily on woody species. Symptoms include round-to-irregular sunken, swollen, flattened, cracked, discoloured, or dead areas on the stems (canes), twigs, limbs, or trunk.

Control includes removing diseased parts in dry weather; growing adapted or resistant varieties in warm well-drained fertile soil; avoiding overcrowding, overwatering, and mechanical wounds; treating bark and wood injuries promptly; controlling insect and rodent disease carriers; wrapping young trees to prevent.

The main measures for controlling the residue are the destruction of vegetation after harvest; cutting and burning of plant parts most severely damaged by anthracnose; spraying with 1% Bordeaux liquid.

Canker

Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

There is no cure for plants that already have damping off.

Rhizoctonia damping-off, blight and rot

Scales or shell-like bumps on plant stems and the underside of leaves. These are the outer coverings of scale insect. Large populations may result in poor growth. Some species of scale insect excrete honeydew, which accumulates on the upper leaf surfaces. This can be colonised by a black non-parasitic fungus known as sooty mould. Some scale insects deposit their eggs under a covering of white waxy fibres in early summer.

Check susceptible plants frequently from spring onwards so action can be taken before a damaging population has developed. When choosing control options you can minimise harm to non-target animals by starting with the methods in the non-pesticide control section. If this is not sufficient to reduce the damage to acceptable levels then you may choose to use pesticides. Within this group the shorter persistence pesticides (that are usually certified for organic growing) are likely to be less damaging to non-target wildlife than those with longer persistence and/or systemic action. Light infestations are of little consequence and can be tolerated. The best time to treat heavy attacks is when the more vulnerable nymphs are present, for many scales out of doors this is during mid-late summer. Scale insects on indoor plants can breed all year round and so there is no best time of year to treat. Note that dead scales can remain firmly attached to the plants. The success of any treatment can be gauged by the extent to which new growth remains free of scale insects.

To get rid of scale insects prune and dispose of infested branches, twigs and leaves. When scale numbers are low they may be rubbed or picked off of plants by hand. Dabbing individual pests with an alcohol-soaked cotton swab or neem-based leaf shine will also work when infestations are light.

Coccoidea

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Wilting. This is the classic sign of an under watered plant. Too little water causes a plant to lose turgor, the rigidity in cells and tissues. There are some diseases that can trigger wilting, but the easiest and most likely explanation is under watering. Dry soil. If the soil around a plant is dry, it may need more water. Exceptions to this are some succulents, like cacti, which don’t need much water because they can store it so well. Dry, dead leaf tips. When a plant doesn’t get enough water, the tips and edges of leaves dry out and turn brown. Ultimately, entire leaves will brown and die. Slow growth. If you are chronically under watering a plant, but still giving it enough water to survive, growth will be slower than normal or expected. New growth, such as leaves, may be small. Visible footprints. For a sign that turf grass is not getting adequate water, look to your footprints. After you step on the grass, it should bounce back quickly. If the footprints remain visible for several minutes, the grass is too dry.

Mulch plants with a 3-to-4-inch layer of organic mulch (woodchips, shredded bark) to reduce soil evaporation and temperature fluctuations, and to conserve moisture. Irrigate slowly so water percolates down into the soil. Do not fertilize unless adequate irrigation is available.

Most garden plants, flowers, and shrubs do best when they receive at least 1 inch of water per week, although they may need more during hot, dry spells. Rain isn't always sufficient at supplying enough water for plants to thrive, so don't count on it to keep plants healthy.

Water deficiency

Symptoms of Cercospora leaf spot first appear as individual, circular spots that are tan to light brown with reddish purple borders. As the disease progresses, individual spots coalesce. Heavily infected leaves first become yellow and eventually turn brown and necrotic.

Avoid overwatering or watering in the late evening to reduce free moisture. Avoid overhead watering where the water can dislodge and disperse spores to uninfected plants. Space plants to encourage air movement and reduce high humidity levels.

For the most part, treating Cercospora leaf spot means preventing the fungi from infecting your plants in the first place.

Cercospora leaf spot

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

Most of the time, this pest is identified by the leaf miner damage. Frequently, it appears as yellow, squiggly lines in the leaves. This is where the leaf miner larva have literally bored their way through the leaf. Leaf miner damage can also appear as spots or blotches.

Pick off and destroy badly infested leaves in small gardens. The more healthy the plant, the less chance that leafminers will hurt it. Maintain plant health with organic fertilizers and proper watering to allow plants to outgrow and tolerate pest damage. Keep your soil alive by using compost and other soil amendments.

The most common method to rid plants of leaf miners is to spray general pesticide on the infected plants. The trick to this method of how to kill leaf miners is to spray at right time. If you spray too early or too late, the pesticide will not reach the leaf miner larva and will not kill the leaf miner flies.

Leaf miners

Springtails occasionally feed on plant roots, but the damage is minimal. Problems arise when these pests congregate in moist areas and multiply. Thousands of springtails blanket walls, foundations and patios as their numbers grow. If not stopped outdoors, springtails multiply indoors in damp basements, kitchens and bathrooms — anywhere with sufficient moisture.

It is not difficult to keep this insect at bay. First of all ensure that house plants are always grown in sterile potting compost (this will also help keep away the diseases that the soil can contain).
If there is insufficient drainage, the compost can become waterlogged, so, next, always ‘crock’ a pot with a layer of grit or clay pellets before adding compost. If the compost to be used is too compact, coarse sand or perlite can be added to make it more free-draining.
If you find it difficult to assess when to water use a moisture meter, a self-watering cone or a container with a reservoir. In the latter cases, the compost takes up water gradually as it dries out, ensuring an even supply.

1 First of all, stop watering the plant and allow it almost to dry Out before re-watering. ‘This may be enough to eradicate these pests. It not, then you will need to use a chemical.
2 Use a suitable chemical, in granule form or diluted with water, to soak the potting mixture.
3 Insecticides containing diazmon, lindanc, malathion, pyrethrum or resmethrin are suitable. Make sure that due ingredients of an insecticide are listed on its label. One application of the chemical should be enough but repeat the application after 8 days to ensure eradicating ideal conditions for springtails.
4 If your plants are infested with Springtails, you will know as soon as you water them, as these tiny insects will start jumping about on top of the potting mixture.
5 Springtails will thrive in waterlogged soil so always water very carefully and ensure that the plant has good drainage.

Springtails

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

A sign of plant disease is physical evidence of the pathogen. For example, fungal fruiting bodies are a sign of disease. When you look at powdery mildew on a lilac leaf, you’re actually looking at the parasitic fungal disease organism itself (Microsphaera alni). Bacterial canker of stone fruits causes gummosis, a bacterial exudate emerging from the cankers. The thick, liquid exudate is primarily composed of bacteria and is a sign of the disease, although the canker itself is composed of plant tissue and is a symptom.

Good gardening habits and effective treatment help prevent, stop and control fungal disease
1. Start by planting healthy stock. 
2. Choose planting sites based on plant needs. 
3. Avoid overhead watering. 
4. Water early in the day. 
5. Don't crowd plants. 
6. Don't work a wet garden. 
7. Treat with a trusted, proven fungicide.

Baking soda, soap, and water is one of the safer ways to treat plant fungus issues, especially if the affected plants are inside your home. You really don't want to be spraying fungicide all over the inside of your home if you can avoid it!

Fungi

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

The first sign of powdery mildew is pale yellow leaf spots. White powdery spots can form on both upper and lower leaf surfaces, and quickly expand into large blotches. The large blotches can cover entire leaf, petiole and stem surfaces. When powdery mildew infects the majority of the foliage, the plant weakens and the fruit ripens prematurely.

Control is possible with triadimefon and propiconazole. It is also possible with hexaconazole, myclobutanil, and penconazole.

Standard fungicides are an effective way to manage powdery mildew disease on plants. Spray programs of conventional fungicides are advised to begin when powdery mildew symptoms and signs are first noticed. Conventional fungicides should be applied on a regular basis for best results against the disease.

Powdery mildew

Rust diseases come in different varieties and can affect a wide range of plants. People often struggle with rust on their roses. It is easy to remember the defining characteristics of this fungus, as they match its name. Rust plant disease will look similar to the rust that appears on that old bicycle in the shed.
- Look for yellow or white spots forming on the upper leaves of a plant.
- Look for reddish to orange blister-like swellings called pustules on the undersides of leaves.
- Orange or yellow spots or streaks appear on the undersides of the leaves.
- Within these spots that form are spores.
- Usually leaf distortion and defoliation occur.

- Dust your plants with sulfur early in the season to prevent infection or to keep mild infections from spreading.
- Space your plants properly to encourage good air circulation.
- Avoid wetting the leaves when watering plants.
- There are many effective rust fungicides you can try.

1 Select rust-resistant plant varieties when available.
2 Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris.
3 Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day. Drip irrigation and soaker hoses can be used to help keep leaves dry.
4 Use a slow-release, organic fertilizer on crops and avoid excess nitrogen. Soft, leafy, new growth is most susceptible.
5 Apply copper sprays or sulfur powders to prevent infection of susceptible plants. For best results, apply early or at first sign of disease. Spray all plant parts thoroughly and repeat every 7-10 days up to the day of harvest.
6 Effectively treat fungal diseases with SERENADE Garden. This broad spectrum bio-fungicide uses a patented strain of Bacillus subtilis and is approved for organic gardening. Best of all, it’s safe to use — you can treat and pick crops the same day!
7 Containing sulfur and pyrethrins, Bonide® Orchard Spray is a safe, one-hit concentrate for insect attacks and fungal problems. For best results, apply as a protective spray (2.5 oz/ gallon) early in the season. If disease, insects or wet weather are present, mix 5 oz in one gallon of water. Thoroughly spray all parts of the plant, especially new shoots.
8 Prune or stake plants and remove weeds to improve air circulation. Make sure to disinfect your pruning tools (one part bleach to 4 parts water) after each cut.
9 Use a thick layer of mulch or organic compost to cover the soil after you have raked and cleaned it well. Mulch will prevent the disease spores from splashing back up onto the leaves. Burn or bag infected plants after the growing season . Do NOT compost.

Leaf Rust

When late blight infects stems, everything above the infection site dies. Infected tomato fruits develop rough, leathery spots or dark, water-soaked areas that rot rapidly. Potato tubers bear dark, irregular spots on the surface and reddish-brown spots that extend down into the flesh. Decay continues after harvest.

Fungicides for the control of potato blight are normally only used in a preventative manner, optionally in conjunction with disease forecasting. In susceptible varieties, sometimes fungicide applications may be needed weekly. An early spray is most effective. The choice of fungicide can depend on the nature of local strains of P. infestans. Metalaxyl is a fungicide that was marketed for use against P. infestans, but suffered serious resistance issues when used on its own. In some regions of the world during the 1980s and 1990s, most strains of P. infestans became resistant to metalaxyl, but in subsequent years many populations shifted back to sensitivity. To reduce the occurrence of resistance, it is strongly advised to use single-target fungicides such as metalaxyl along with carbamate compounds. A combination of other compounds are recommended for managing metalaxyl-resistant strains. These include mandipropamid, chlorothalonil, fluazinam, triphenyltin, mancozeb, and others. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against late blight.

Ridging is often used to reduce tuber contamination by blight. This normally involves piling soil or mulch around the stems of the potato blight meaning the pathogen has farther to travel to get to the tuber. Another approach is to destroy the canopy around five weeks before harvest, using a contact herbicide or sulfuric acid to burn off the foliage. Eliminating infected foliage reduces the likelihood of tuber infection.

Late blight

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

General symptoms on the solanaceous crops and cucurbits include seed rot and seedling blight which discolors the roots and causes seedlings to topple over. Preemergence and postemergence damping-off are also possible symptoms that may occur.

Avoid overhead watering that can produce surface runoff, and consider slow drip irrigation instead. Hardy Phytophthora blight pathogens will survive in both hot summer and cold winter compost piles. Remove infected plants immediately, bag and dispose of infected debris, and always keep your garden clean.

Crop rotation may reduce the number of pathogens in the soil and, "a minimum of a 3 years crop rotation which alternates with non-host species is recommended to avoid build-up of P. capsici spores." Crops should also avoid conditions that would be conducive to the pathogen by using well drained soils and raised beds. As stated above, "Excess moisture is the single most important component to the initial infection and subsequent spreading of Phytophthora capsici. Overall, a study by K.H. Lamour and M.K. Hausbeck found that "crop rotation and mefenoxam are not likely to provide economic control". Mefenoxem is the active enantiomer contained in the racemic fungicide metalaxyl used to defend against Phytophthora capsici. Sexual recombination provides the genetic diversity to promote resistance towards fungicides in P. capsici. The failure of crop rotation as a means to control P. capsici may also be due to weeds playing the role of an alternative host in the absence of common hosts. According to a study done by the University of Florida, "In Florida, and perhaps elsewhere, weeds may contribute to pathogen survival in the absence of a host crop or when propagules may not readily survive in soil or plant debris." To avoid fruit rot of vegetable crops in the Cucurbitaceae, trellising cucurbit fruits and other ways to keep the fruit off the ground is a way to control secondary inoculants (zoospores) from physically being splashed from the soil onto the fruit. Control of Phytophthora capsici is easier in drier climates with less rainfall such as California. In these areas, it is important to practice placing drip irrigation emitters away from the stems of pepper plants in order to reduce the incidence of crown rot in peppers.

Phytophthora blight

Cucurbits infected with tospovirus exhibit a variety of symptoms. Leaves can show bronzing to severe systemic chlorotic spotting. Other symptoms include leaf deformation, mosaic, die-back and overall plant stunting. Fruit symptoms can range from chlorotic ring spots on young fruit to necrotic lesions on older fruit.

Olea Dioica

(Olea Dioica)

What is the plant

Planting

Additional

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists