Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Signs of damage

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

How to prevent

There is no cure for plants that already have damping off.

Treat

main

description

description_sm

description_sm_2

Rhizoctonia damping-off, blight and rot

Symptoms usually involve necrotic, often water-soaked leaf spots, typically most severe on lower leaves. The spots may be very small at first but develop an angular shape as the movement of the bacteria is limited by leaf veins. Eventually several spots may enlarge, coalesce and cause death of mature leaves.

Reduce humidity to encourage dry foliage and avoid dripping within the greenhouse. Avoid splashing water from plant to plant.  Avoid excess moisture and late day irrigation.

Chemical treatments work best as a preventive measure. Copper-based plant protection products have bactericidal activity (kill bacteria) and can be effective. Disinfection products that contain hydrogen peroxide or quaternary ammonia are also available.

Gammaproteobacteria

Wilted, downward-hanging foliage is often the first obvious symptom of Armillaria root rot. Other symptoms include foliage yellowing, leaf drop, and dieback of upper limbs. During the rainy fall and winter, groups of short-lived mushrooms often grow around the base of Armillaria-infected trees.

Cultural practices can also be effective for preventing the spread of Armillaria. High temperatures interfere with the progression of this disease; if soil temperatures reach 79 °F (26 °C), then the growth of Armillaria in the soil will be limited. Using collar excavation to expose primary roots directly below the crown to the continuous cycle of solar heating and air may reduce the colonization from Armillaria in trees that are already infected. This is called root collar excavation (RCE), and while it has been applied to citrus orchards and grapevines, this method has high labor costs and involvement due to the difficulty of carefully exposing these primary roots.

Sadly, there is no absolute treatment for Armillaria root rot. The disease can be managed by the consistent removal of dead trees and infected stumps. Armillaria requires consistent moisture to survive, and in citrus groves, excavation around the root crown has been an effective deterrent but not an ultimate cure.

Armillaria root rot

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

Symptoms of Cercospora leaf spot first appear as individual, circular spots that are tan to light brown with reddish purple borders. As the disease progresses, individual spots coalesce. Heavily infected leaves first become yellow and eventually turn brown and necrotic.

Avoid overwatering or watering in the late evening to reduce free moisture. Avoid overhead watering where the water can dislodge and disperse spores to uninfected plants. Space plants to encourage air movement and reduce high humidity levels.

For the most part, treating Cercospora leaf spot means preventing the fungi from infecting your plants in the first place.

Cercospora leaf spot

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Raised yellowish-orange, powdery pustules on the surface of infected foliage. Significant foliar dieback occurs on especially susceptible cultivars.

As with other fungus, daylily rust thrives in moisture. Use soaker hoses rather than overhead watering systems and water in the morning rather than late in the day or at night. This will cut down on the amount of time that the leaves remain wet.

Do not move or transport infected plant material. Carefully inspect incoming plant material for signs of rust. Fungicide applications are needed for disease management, especially on susceptible cultivars. Contact your local extension office for information on ratings of cultivar susceptibility and current fungicide control recommendations.

Daylily rust

The symptoms in the upper parts of the plants cannot be recognized in early stages of root infection.

Diagnosis of this disease is difficult and laborious because infected roots in the soil can only be detected by digging up the soil and observing the roots by eye, trapping mycelia around the infected roots by the bait twig method

Sordariomycetes

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

All the visible and otherwise detectable changes in the infected plants make up the symptoms of the disease. Symptoms may change continuously from the moment of their appearance until the entire plant dies or they may develop up to a point and then remain more or less unchanged for the rest of the growing season. Symptoms may appear as soon as 2 to 4 days after inoculation, as happens in some localized viral diseases of herbaceous plants, or as late as 2 to 3 years after inoculation, as in the case of some viral, mollicute, and other diseases of trees. In most plant diseases, however, symptoms appear from a few days to a few weeks after inoculation.

Put weather stripping around your windows and doors, and replace any stripping that is worn; Keep any outdoor lights off, and turn off as many lights inside your home as possible, as stink bugs are attracted to light; Pull down window shades and blinds to keep the light from spilling outside at night.

You can either use silicone based caulk to cover the cracks or screens for windows and doors, or you can also spray the exterior of your home in the fall, for a plus of protection. You can use natural pesticides against these insects, if you prefer not to fill your home with chemical pesticides.

Pentatomidae

Galls are most commonly found near ground level on the roots and lower branches of the plants. As the galls enlarge, they become woody and hard. The outer layer turns brown and corky. The plant may be weakened and stunted with some branch or tip dieback. Symptoms may not develop immediately after infection. Galls grow most rapidly during the warm months of the year.

Limit wounding of plant material. Avoid planting too deep. Avoid mounding soil up on newly planted trees. Keep crown of tree as dry as possible; Agrobacterium is favored by wet environments.

1. Prune out infected material. Crown gall cannot be eliminated from a shrub even though the infected plant may live for many years. To improve the appearance of the plant, prune out and destroy infected stems below the galled area. Sterilize the pruning shears after each cut with a mixture of one part bleach to nine parts water. 2. Destroy infected plants. Destroy the infected plant. The bacterium will remain in the soil so it is important to plant a resistant plant species. If the same species needs to be planted in the area, remove and replace the soil or consider soil sterilization. 3. Sterilize the soil. Soils known to be infected with crown gall bacteria can be sterilized using chemicals, heat, or antibiotics. This is not practical for most home gardeners. A biological control has been introduced using a bacterium, Agrobacterium radiobactor strain 84. This bacterium was discovered to be antagonistic to crown gall bacterium. It is available for use as a preplant treatment by dipping nursery stock in a suspension of the live bacteria in water. 4. Exclude the problem. When purchasing forsythia and euonymus plants, inspect them carefully for signs of galls. Do not purchase plants that show gall-forming symptoms. 5. Replant with a more resistant plant species. The following plants recommended by the University of Illinois show greater resistance to bacterial crown gall: barberry, hornbeam, true cedars, ginkgo, golden raintree, tulip tree, mahonia, spruce, linden, boxwood, catalpa, beech, holly, larch, magnolia, black gum, pine, Douglas fir, bald cypress, hemlock, birch, firethorn, redbud, smoke tree, sweet gum, deutzia, serviceberry, yellowwood, yew, and zelkova.

Crown gall

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

Symptoms vary across plant organs and tissues. B. cinerea is a soft rot that will have a collapsed and water soaked appearance on soft fruit and leaves. Brown lesions may develop slowly on undeveloped fruit. Twigs infected with gray mold will die back. Blossoms will cause fruit drop and injury, such as ridging on developing and mature fruit. Symptoms are visible at wound sites where the fungus begins to rot the plant. Gray masses with a velvety appearance are conidia on the plant tissues are a sign of plant pathogen. These conidia are asexual spores that will continue to infect the plant and surrounding hosts throughout the growing season making this a polycyclic disease. Plants can produce localized lesions when a pathogen attacks. An oxidative burst causes hypersensitive cell death called a hypersensitive response (HR). This soft rot can trigger HR to assist in colonization. Botrytis cinerea, as a necrotrophic pathogen, exploits the dead tissue for its pathogenicity or its ability to cause disease. Susceptible plants cannot use the HR to protect against Botrytis cinerea.

The best way to prevent gray mold is to space out plants so they have room to dry out after rain or watering. Remove infected flowers, leaves and stems. Infected plant parts should be buried or composted. Many flowering plants can recover from gray mold when warm, dry conditions return.

Prune or stake plants to improve air circulation between plants. · If growing indoors use a small clip-on fan to improve air flow.

Gray mold

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Plant stunting and severe curling of leaves occur when the leafhopper Empoasca fabae punctures the undersurfaces of leaves and veins of bush beans and inhibits growth. This leafhopper also feeds on alfalfa and causes leaves to turn yellow and drop off.

Try to avoid moisture or humidity relationships as they affect the habitats of homopterans.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Homoptera

Leaves - abnormal colours, abnormal leaf fall, abnormal leaf fall, internal feeding, wilting.

Avoid heat sources such as radiators. Protect the plant from direct sunlight during the hotter hours if placed behind a window. The temperature must never drop below 60°F (15°C).

Maintain a regular watering schedule. Water stephanotis regularly during the first growing season. Fertilize with a balanced mix. Scatter about 1/4 cup of dry fertilizer on the soil around the plant in early spring.  Prune in late winter or early spring.

Stephanitis

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

As is common among rusts, the life cycle of Cronartium ribicola includes two host species and goes through five spore stages. This life cycle is termed heteroecious. In the specific case of Cronartium ribicola, the aecial host of this pathogen is the white pine (Pinus subgenus Strobus, family Pinaceae) and the telial hosts are those of the genus Ribes, specifically currants and gooseberries. Species of both telial and aecial hosts have varying levels of resistance or immunity to infection. On the aecial host, the first signs of C. ribicola are yellow or red spots on the Pinus needles, but these are small and can be difficult to see; more visible symptoms on the aecial host includes perennial cankers which appear on the branches within two years of infection. Looking at the infected plant as a whole, the Pinus will appear chlorotic, and stunted with dead branches or tops that turn a bright red color. On the other hand, the telial host, Ribes, can contract yellowish chlorotic leaf spots, but is otherwise not significantly impacted. The signs of C. ribicola on Ribes, come in the form of the pathogen itself as orange pustules on the underside of the leaf.

Examine white pines each year for blister rust flags and cankers. Prune off branches with cankers at a branch union or where the branch meets the trunk.  Infected branches don't require any special kind of disposal because the pathogen cannot survive in dead wood.

Pruning white pine blister rust is the treatment of choice for localized infections, but take care not to spread the spores when you're cutting out diseased tissue. Dispose of any pruned materials immediately in a fire or by double bagging in plastic.

White pine blister rust

A sign of plant disease is physical evidence of the pathogen. For example, fungal fruiting bodies are a sign of disease. When you look at powdery mildew on a lilac leaf, you’re actually looking at the parasitic fungal disease organism itself (Microsphaera alni). Bacterial canker of stone fruits causes gummosis, a bacterial exudate emerging from the cankers. The thick, liquid exudate is primarily composed of bacteria and is a sign of the disease, although the canker itself is composed of plant tissue and is a symptom.

Good gardening habits and effective treatment help prevent, stop and control fungal disease
1. Start by planting healthy stock. 
2. Choose planting sites based on plant needs. 
3. Avoid overhead watering. 
4. Water early in the day. 
5. Don't crowd plants. 
6. Don't work a wet garden. 
7. Treat with a trusted, proven fungicide.

Baking soda, soap, and water is one of the safer ways to treat plant fungus issues, especially if the affected plants are inside your home. You really don't want to be spraying fungicide all over the inside of your home if you can avoid it!

Fungi

Southern blight on plants is most likely to occur in the summer months when the soil is warm and moist. Symptoms include discolored lower leaves, wilted foliage, and plant collapse and it usually results in the death of the plant.

Preventing entry of the pathogen. Use of healthy, certified seeds of known origin. Careful cleaning of agricultural tools. Avoiding environmental conditions that favour development of the pathogen. Irrigation management. Plant density and growth habitats.

Soil solarization and certain organic amendments (e.g. composted chicken manure and rye-vetch green manure), as well as introducing certain Trichoderma spp. have also been shown to reduce plant death and number of sclerotia produced in the field in tomatoes. In addition to these cultural methods, chemical methods (e.g. fungicides) can also be employed.These methods all disrupt the production of mycelium and sclerotia, thus reducing the spread of disease.

Southern blight

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

A diagnostic feature of this disease is the presence of many dark-brown, pimple-like structures called pycnidia (fruiting bodies of the fungus) that are readily visible in the tan centers of the spots. When spots are numerous, affected leaves turn yellow and eventually shrivel up, brown, and drop off.

Use disease-free seed. There's no evidence that this fungus is carried by seeds, but err on the safe side and don't save seed from infected plants. Thoroughly processing the tomato seeds you are saving will also help rid the seeds of lingering diseases.
Start with a clean garden. Dispose of all affected plants. The fungus can over-winter on the debris of diseased plants. It's important to dispose of all the affected plants far away from the garden and the compost pile. Keep in mind that it may have spread to your potatoes and eggplants, too.
Avoid overhead watering. Water aids the spread of Septoria leaf spot. Keep it off the leaves as much as possible by watering at the base of the plant only. Of course, it's impossible to keep the rain off your plants, but every little bit helps.
Provide room for air circulation. Leave some space between your tomato plants so there is good airflow. Stake them so that they are not touching the ground and not all bunched together. Good air circulation is especially important during damp and rainy periods.
Mulch below the plants. A layer of mulch will help prevent spores on the ground from splashing up onto the lower leaves.
Plant next year's tomatoes in a different section of your garden. In small gardens, it's not always practical to rotate your crops, so good clean up and sanitation become even more important.

Removing infected leaves. Remove infected leaves immediately, and be sure to wash your hands and pruners thoroughly before working with uninfected plants.
Consider organic fungicide options. Fungicides containing either copper or potassium bicarbonate will help prevent the spreading of the disease. Begin spraying as soon as the first symptoms appear and follow the label directions for continued management.
Consider chemical fungicides. While chemical options are not ideal, they may be the only option for controlling advanced infections. One of the least toxic and most effective is chlorothalonil (sold under the names Fungonil and Daconil).

Septoria leaf spot

Loss of chlorophyll, with the resulting yellowing of the leaves is the most obvious sign of senescence and in some cases, as seen in Figure 1a and c, the additional synthesis of anthocyanins during senescence results in dramatic orange, red and even purple coloration.

Leaf senescence occurs when the leaf is no longer of use to the plant. It is a normal aging process.

Senescence

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

The first sign of powdery mildew is pale yellow leaf spots. White powdery spots can form on both upper and lower leaf surfaces, and quickly expand into large blotches. The large blotches can cover entire leaf, petiole and stem surfaces. When powdery mildew infects the majority of the foliage, the plant weakens and the fruit ripens prematurely.

Control is possible with triadimefon and propiconazole. It is also possible with hexaconazole, myclobutanil, and penconazole.

Standard fungicides are an effective way to manage powdery mildew disease on plants. Spray programs of conventional fungicides are advised to begin when powdery mildew symptoms and signs are first noticed. Conventional fungicides should be applied on a regular basis for best results against the disease.

Powdery mildew

The pathogen causes angular chlorotic lesions on the foliage. These lesions appear angular because they are bound by leaf veins. During humid conditions, inspection of the underside of the leaf reveals gray-brown to purplish-black fungal growth. This downy material is the sporulation of the pathogen. Magnification of the sporulation reveals the acutely and dichotomously branched sporangiophores bearing lemon-shaped sporangia. Eventually, leaves will turn necrotic and curl upwards. The disease is sometimes called wildfire because of how rapidly it progresses, as if the crop were burned by fire. Symptoms on watermelon and cantaloupe are different from on other cucurbits; leaf spots are typically not angular and turn brown to black in color. Often, an exaggerated upward leaf-curling will occur. Regardless of which cucurbit is involved, only the leaves are infected, not fruit, flowers, stems or roots. Disease of the leaves results in three major effects: 1. reduced yields, 2. a greater proportion of misshapen fruit, especially in cucumber, and 3. sunscalded fruit, due to increased exposure to direct sunlight, especially in watermelon and winter squash.

Early detection of downy mildew and immediate or preventative fungicide application is imperative for the control of this disease. A forecasting system exists to assist growers in timing their fungicide applications for maximum benefit. The system tracks outbreaks of the disease and provides a forecast or risk assessment for future outbreaks.

Resistant cultivars - Host resistance is an important tool in disease control and should be used whenever possible. Cultivars resistant to downy mildew have been developed for cucumber and cantaloupe and to a lesser extent for squash and pumpkin. Although cucumber downy mildew has been severe on resistant cultivars, these cultivars are more effective than susceptible cultivars in delaying infection. Chemical control - Chemical control is highly recommended because downy mildew is an aggressive and destructive disease and satisfactory control without the use of fungicides is unlikely. Both protectant and systemic products should be applied. Fungicides are most effective when applied prior to infection and reapplied at 5- to 7-day intervals. The following products have proven to be the most effective fungicides in cucumber downy mildew control in North Carolina trials conducted annually from 2004 to 2008: Presidio (fluopicolide, Valent), Ranman (cyazofamid, FMC), Previcur Flex (propamocarb, Bayer), Curzate (cymoxanil, DuPont), Tanos (famoxadone and cymoxanil, DuPont), and Gavel (zoxamide and mancozeb, Dow AgroSciences). These products should be applied in a program to prevent pathogen resistance, that is, rotated with fungicides of a different mode of action. Protectant fungicides such as chlorothalonil and mancozeb should be used as mixing partners. Вiological control - Although many biological control products have been evaluated for their ability to control downy mildew, none have proven effective and are not recommended for use.

Cucurbit downy mildew

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Lower leaves are yellow. Plant looks wilted Roots will be rotting or stunted. No new growth. Young leaves will turn brown. Soil will appear green (which is algae)

Rainwater harvesting and recycled wastewater also allow to reduce scarcity and ease pressures on groundwater and other natural water bodies. Groundwater recharge, that allows water moving from surface water to groundwater, is a well-known process to prevent water scarcity.

The provision of water treatment chemicals ensures the provision of safe water.

Water-related issue

Most of the time, this pest is identified by the leaf miner damage. Frequently, it appears as yellow, squiggly lines in the leaves. This is where the leaf miner larva have literally bored their way through the leaf. Leaf miner damage can also appear as spots or blotches.

Pick off and destroy badly infested leaves in small gardens. The more healthy the plant, the less chance that leafminers will hurt it. Maintain plant health with organic fertilizers and proper watering to allow plants to outgrow and tolerate pest damage. Keep your soil alive by using compost and other soil amendments.

The most common method to rid plants of leaf miners is to spray general pesticide on the infected plants. The trick to this method of how to kill leaf miners is to spray at right time. If you spray too early or too late, the pesticide will not reach the leaf miner larva and will not kill the leaf miner flies.

Leaf miners

When late blight infects stems, everything above the infection site dies. Infected tomato fruits develop rough, leathery spots or dark, water-soaked areas that rot rapidly. Potato tubers bear dark, irregular spots on the surface and reddish-brown spots that extend down into the flesh. Decay continues after harvest.

Fungicides for the control of potato blight are normally only used in a preventative manner, optionally in conjunction with disease forecasting. In susceptible varieties, sometimes fungicide applications may be needed weekly. An early spray is most effective. The choice of fungicide can depend on the nature of local strains of P. infestans. Metalaxyl is a fungicide that was marketed for use against P. infestans, but suffered serious resistance issues when used on its own. In some regions of the world during the 1980s and 1990s, most strains of P. infestans became resistant to metalaxyl, but in subsequent years many populations shifted back to sensitivity. To reduce the occurrence of resistance, it is strongly advised to use single-target fungicides such as metalaxyl along with carbamate compounds. A combination of other compounds are recommended for managing metalaxyl-resistant strains. These include mandipropamid, chlorothalonil, fluazinam, triphenyltin, mancozeb, and others. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against late blight.

Ridging is often used to reduce tuber contamination by blight. This normally involves piling soil or mulch around the stems of the potato blight meaning the pathogen has farther to travel to get to the tuber. Another approach is to destroy the canopy around five weeks before harvest, using a contact herbicide or sulfuric acid to burn off the foliage. Eliminating infected foliage reduces the likelihood of tuber infection.

Late blight

Stems will be leggy or stretched out. Leaves turn yellow. Leaves are too small.

Arrange the light sources so that the plant receives the required number of photons.

Make sure your plant gets not too much/not too little light.

Light-related issue

Mosaic symptoms are variable but commonly include irregular leaf mottling (light and dark green or yellow patches or streaks). Leaves are commonly stunted, curled, or puckered; veins may be lighter than normal or banded with dark green or yellow.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Monitor the rest of your plants closely, especially those that were located near infected plants.
Disinfect gardening tools after every use.

Control measures are the use of resistant varieties, the destruction of resistant vectors and weeds - pathogen reserves, removal of diseased plants and plant debris, crop rotation, sterilization of tools for plant care.

Mosaic virus (general)

Wilting. This is the classic sign of an under watered plant. Too little water causes a plant to lose turgor, the rigidity in cells and tissues. There are some diseases that can trigger wilting, but the easiest and most likely explanation is under watering. Dry soil. If the soil around a plant is dry, it may need more water. Exceptions to this are some succulents, like cacti, which don’t need much water because they can store it so well. Dry, dead leaf tips. When a plant doesn’t get enough water, the tips and edges of leaves dry out and turn brown. Ultimately, entire leaves will brown and die. Slow growth. If you are chronically under watering a plant, but still giving it enough water to survive, growth will be slower than normal or expected. New growth, such as leaves, may be small. Visible footprints. For a sign that turf grass is not getting adequate water, look to your footprints. After you step on the grass, it should bounce back quickly. If the footprints remain visible for several minutes, the grass is too dry.

Mulch plants with a 3-to-4-inch layer of organic mulch (woodchips, shredded bark) to reduce soil evaporation and temperature fluctuations, and to conserve moisture. Irrigate slowly so water percolates down into the soil. Do not fertilize unless adequate irrigation is available.

Most garden plants, flowers, and shrubs do best when they receive at least 1 inch of water per week, although they may need more during hot, dry spells. Rain isn't always sufficient at supplying enough water for plants to thrive, so don't count on it to keep plants healthy.

Water deficiency

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

The chlorophyll content of the plant leaves is reduced which results in pale yellow color (chlorosis). Older leaves turn completely yellow. Flowering, fruitings, protein and starch contents are reduced. Reduction in protein results in stunted growth and dormant lateral buds.

Nitrogen deficiency can be prevented in the short term by using grass mowings as a mulch, or foliar feeding with manure, and in the longer term by building up levels of organic matter in the soil.

Fertilizers like ammonium phosphate, calcium ammonium nitrate, urea can be supplied. Foliar spray of urea can be a quick method.

Nitrogen deficiency

Cucurbits infected with tospovirus exhibit a variety of symptoms. Leaves can show bronzing to severe systemic chlorotic spotting. Other symptoms include leaf deformation, mosaic, die-back and overall plant stunting. Fruit symptoms can range from chlorotic ring spots on young fruit to necrotic lesions on older fruit.

Keep the greenhouse free of weeds inside and around the outside, since both thrips and tospoviruses are easily harbored in greenhouse weeds. When new cuttings or plugs arrive, check them for thrips or virus symptoms immediately. You can also employ virus indicator plants in the greenhouse.

Infected plants cannot be cured. Control measures aim to prevent or reduce the levels of disease in crops by removing or avoiding sources of virus infection and minimising spread by thrips.

Tospovirus

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

Phytoplasmas can infect and cause various symptoms in more than 700 plant species. One characteristic symptom is abnormal floral organ development including phyllody, (i.e., the production of leaf-like structures in place of flowers) and virescence (i.e., the development of green flowers attributable to a loss of pigment by petal cells). Phytoplasma-harboring flowering plants may nevertheless be sterile. The expression of genes involved in maintaining the apical meristem or in the development of floral organs is altered in the morphologically affected floral organs of phytoplasma-infected plants. A phytoplasma infection often triggers leaf yellowing, probably due to the presence of phytoplasma cells in phloem, which can affect phloem function and carbohydrate transport, inhibit chlorophyll biosynthesis, and trigger chlorophyll breakdown. These symptoms may be attributable to stress caused by the infection rather than a specific pathogenetic process. Many phytoplasma-infected plants develop a bushy or "witch's broom" appearance due to changes in their normal growth patterns. Most plants exhibit apical dominance but infection can trigger the proliferation of axillary (side) shoots and a reduction in internode size. Such symptoms are actually useful in the commercial production of poinsettias. Infection triggers more axillary shoot production; the poinsettia plants thus produce more than a single flower.

Phytoplasmas are normally controlled by the breeding and planting of disease-resistant crop varieties (perhaps the most economically viable option) and by the control of insect vectors.

Plantibodies targeting phytoplasmas have also been developed. Tetracyclines are bacteriostatic to phytoplasmas.However, disease symptoms reappear in the absence of continuous antibiotic application. Thus, tetracycline is not a viable agricultural control agent, but it is used to protect ornamental coconut trees.

Phytoplasma

Planting resistant crops is the ideal form of disease prevention, however, mutations can give rise to new strains of fungi that can overcome plant resistance. Although the disease cannot be stopped by removal of the alternate host, the life cycle is disrupted and the rate of mutation is decreased because of reduced genetic recombination. This allows resistance bred crops to remain effective for a longer period of time.

Macrocyclic Disease: Developing a management plan for this type of disease depends largely on whether the repeating stage (urediniospores) occur on the economically important host plant or the alternate host. For example, the repeating stage in white pine blister rust disease does not occur on white pines but on the alternate host, Ribes spp. During August and September Ribes spp. give rise to teliospores which infect white pines. Removal of the alternate host disrupts the life cycle of the rust fungi Cronartium ribicola, preventing the formation of basidiospores which infect the primary host. Although spores from white pines cannot infect other white pines, survival spores may overwinter on infected pines and reinfect Ribes spp. the following season. Infected tissue is removed from white pines and strict quarantines of Ribes spp. are maintained in high risk areas.

Pucciniales

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

Some of the most common symptoms of nutrient deficiencies are chlorosis, foliage color changes, overall plant stunting and sometimes necrosis. All can be caused by one or more deficiencies.

Monitor pH Levels – There are lots of things that can cause a hydroponic nutrient solution to drift outside of the ideal range of about 5.6. Usually, if a nutrient solution is left unmonitored for too long, it can start drifting outside of this range because it gets too dense in raw, use nutrients. Other times, it might start becoming too acid or too alkaline when you add new hydroponic nutrients or transfer your plants to a new medium. Since pH levels can change very rapidly, it is important to check your pH level daily. The longer your nutrient solution spends outside of this ideal range, the greater the chance that your flowers or vegetables will suffer a plant deficiency. Use a pharmaceutical grade pH adjustment product designed specifically for hydroponics to make the necessary adjustments. This way you have less of a chance of accidentally over compensating your pH adjustments.  Keep Temperature Levels Stable – Your nutrient solution should be fairly cool to temperate, somewhere in the range of sixty six to seventy one degrees Fahrenheit. You should be particularly aware of this if you happen to live in an unusually warm or cold part of the world. If you feel it is necessary to prevent plant deficiency, take extra steps insulate your grow room against outside elements. You should also avoid placing your reservoir directly on the ground in your grow room, as the floor can be very cool, which can transfer to the reservoir and cause a plant deficiency.

When the temperature of your indoor garden or the nutrient solution falls below 55 degrees Fahrenheit, plants take up less phosphorus than they need. If you've determined that the temperature is not the problem, treat your plants to bone meal, a supplement that's rich in phosphorus.

Nutrient deficiency

General symptoms can include one or more of the following symptoms: curling or cupped leaves, stunted growth, discolored leaves, or leaves with dead spots. The same herbicide may cause different symptoms on different plant species. Since herbicides do not leave a "calling card" like mites, insects, and diseases (but the damage they cause can be mistaken for herbicide damage), it is advised to rule these out first. Other disorders that produce symptoms that can resemble herbicide damage include virus diseases, adverse weather, salt damage, drought, soil compaction, misapplied fertilizers, root stress, and nutrient deficiencies. Excluding these as causes requires close examination of the site and attention to patterns. Is the pattern of damaged plants consistent with drifting spray? Is more than just one kind of plant affected? Did the symptoms appear within one or two days (in most cases) of the suspected application of an herbicide? Were any lawn weed control products used in the area, including weed and feed products containing an herbicide? The answer to these and other questions can help make a circumstantial case of herbicide damage.

Use shielded booms to minimize herbicide off-target movement. Use spray additives within label guidelines to reduce production of small spray droplets. This will result in less potential for drift. Avoid tank mix ammonium sulfate with volatile herbicides as ammonium sulfate increases volatility.

Organic strategies that help plants recover from herbicide damage are those that aid in maintaining plant vigor:  water during dry periods; fertilize with organic fertilizer according to a soil test report; and watch for and control any insect or disease problems using organic approaches.

Herbicide damage

Yellowing (Chlorosis) occur in the newly emerging leaves instead of the older leaves and usually seen in the interveinal region Fruit would be of poor quality and quantity. Chlorosis occurs in younger leaves because iron is not a mobile element, and as such, the younger leaves cannot draw iron from other areas of the plant. Over time, the yellowing may even turn a pale white or the whole leaf may be affected. Iron deficient plants may overaccumulate heavy metals such as cadmium. Any plant may be affected, but raspberries and pears are particularly susceptible, as well as most acid-loving plants such as azaleas and camellias.

Prevention is the best control. Do not plant chlorosis-susceptible trees in soils having a high pH or in soils low in organic matter. If practical, replace species that are susceptible. When the leaves of plants become chlorotic, always determine the primary cause through a soil test.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II) sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

Iron deficiency

Symptoms of infection include a downward curling of the leaves, leaf tip dieback, stunting, necrosis of growing leaf tips, sunken ‘chicken pox-like’ spots on leaves (often with a surrounding halo), stem death and yellowing. Since these symptoms are so generic, extreme caution must be taken when introducing new plants to your greenhouse. Infected plants can not be cured and not all hosts display visible symptoms.

Branched Plantain

(Plantago arenaria)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists