- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

Signs of damage

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

How to prevent

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Treat

main

description

description_sm

description_sm_2

Sooty Mold

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Aphids

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

Symptoms of bacterial infection in plants are much like the symptoms in fungal plant disease. They include leaf spots, blights, wilts, scabs, cankers and soft rots of roots, storage organs and fruit, and overgrowth. Bacterial spots: the most common symptom of bacterial disease is leaf spots.

The best way to prevent fungi from attacking your plants is to buy disease resistant varieties whenever possible. Other ways include minimizing the amount of water contacting foliage. Water at the soil level and early in the day. This allows foliage to dry out quickly, should it become wet.

Antibiotics: streptomycin and/or oxytetracycline may also help kill or suppress plant pathogenic bacteria prior to infection and reduce spread of the disease, but they will not cure plants that are already diseased. Antibiotics are also used to treat diseases caused by fastidious vascular bacteria.

Bacteria

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Hosta virus X does not kill the plants infected, but Hostas that have been infected do show a variety of other symptoms, such as: Ink-bleed, which makes the plant look discolored in certain spots, and this effect is generally centered on a vein. An example of this is shown in the photo in this article. Desiccation or Collapsed tissue, which can be signs of heavier infection, makes the plant look as if it is dried out. Mottling, which makes the plant appear blotchy. This is not always a symptom of HVX, and could be from another virus, but it should always be treated as an infected plant regardless. A Hosta may no longer express symptoms of the virus when it grows back in the Spring, even though it may have shown symptoms in a previous year. Nonetheless, the plant should still be considered infected with HVX.

The only way to eliminate the disease is to destroy infected plants (and any associated plant debris) by burning (where allowed by local ordinance) or landfilling. DO NOT compost hostas with HVX.

Once a Hosta plant is infected, it will be infected for the rest of its life. Any plant suspected of being infected should be burned if it is legal to do so. If it is not, then it should be tossed in the garbage, but infected Hosta plants should never be composted. If any plant in a batch shows symptoms, the entire batch should be considered infected and be destroyed. Once a plant has been removed, the spot occupied by the Hosta should be left empty for a long time to prevent the spread of the virus to a plant that replaces it. The virus primarily spreads through infected sap, so cutting multiple plants with the same tool can spread the virus. Animals that eat the plants may also spread the virus through sap by eating from an infected plant and then eating from an uninfected plant.

Hosta virus x

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

Rust diseases come in different varieties and can affect a wide range of plants. People often struggle with rust on their roses. It is easy to remember the defining characteristics of this fungus, as they match its name. Rust plant disease will look similar to the rust that appears on that old bicycle in the shed.
- Look for yellow or white spots forming on the upper leaves of a plant.
- Look for reddish to orange blister-like swellings called pustules on the undersides of leaves.
- Orange or yellow spots or streaks appear on the undersides of the leaves.
- Within these spots that form are spores.
- Usually leaf distortion and defoliation occur.

- Dust your plants with sulfur early in the season to prevent infection or to keep mild infections from spreading.
- Space your plants properly to encourage good air circulation.
- Avoid wetting the leaves when watering plants.
- There are many effective rust fungicides you can try.

1 Select rust-resistant plant varieties when available.
2 Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris.
3 Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day. Drip irrigation and soaker hoses can be used to help keep leaves dry.
4 Use a slow-release, organic fertilizer on crops and avoid excess nitrogen. Soft, leafy, new growth is most susceptible.
5 Apply copper sprays or sulfur powders to prevent infection of susceptible plants. For best results, apply early or at first sign of disease. Spray all plant parts thoroughly and repeat every 7-10 days up to the day of harvest.
6 Effectively treat fungal diseases with SERENADE Garden. This broad spectrum bio-fungicide uses a patented strain of Bacillus subtilis and is approved for organic gardening. Best of all, it’s safe to use — you can treat and pick crops the same day!
7 Containing sulfur and pyrethrins, Bonide® Orchard Spray is a safe, one-hit concentrate for insect attacks and fungal problems. For best results, apply as a protective spray (2.5 oz/ gallon) early in the season. If disease, insects or wet weather are present, mix 5 oz in one gallon of water. Thoroughly spray all parts of the plant, especially new shoots.
8 Prune or stake plants and remove weeds to improve air circulation. Make sure to disinfect your pruning tools (one part bleach to 4 parts water) after each cut.
9 Use a thick layer of mulch or organic compost to cover the soil after you have raked and cleaned it well. Mulch will prevent the disease spores from splashing back up onto the leaves. Burn or bag infected plants after the growing season . Do NOT compost.

Leaf Rust

Browning of leaf margins and/or yellowing or darkening of the areas between the main leaf veins are symptoms of leaf scorch. Due to environmental causes, leaves may dry, turn brown, and become brittle. Look for damage to trees and shrubs on the upper portion on the sunny, southern side and on the windy side. Premature dropping of leaves and twig dieback may occur during the late summer. Symptoms usually appear after drying winds in conjunction with periods of hot, dry weather. Leaf scorch on narrow leaf evergreens appears as brown or purple brown discoloration of the needle tips. If unfavorable conditions become more severe, browning of needles increases. This should not be confused with the browning and shedding of older interior needles. Scorch may result from hot, dry weather in summer or from strong, dry winter winds when the ground is frozen. Symptoms may not become apparent for a month or more after the initial injury. Winter leaf scorch in evergreen plants usually appears as two long, brown areas paralleling the main leaf vein.

1. Plant Thoughtfully. Even your plants that love to soak up the sun need some form of shade to protect them.
2. Use Sunblock. If you can't provide your plants the amount of shade they need, use another method to keep them insulated and keep moisture in the soil around them.
3. Create Shade.

1. Water when needed and maintain plant vigor. Plant in a fertile, well-drained soil at the same depth the plants grew in at the nursery and with an adequate supply of organic matter. Soil should be moist to a depth of 10 to 12 inches after a thorough watering. This should be done about once weekly. It is very important for the trees, especially broadleaf and needled evergreens, to be well watered going into the winter period. Water during this period if seasonal rains are not adequate or during the winter when the soil is not frozen. Annuals and perennials require more frequent watering than most trees and shrubs. 
2. Fertilize. Fertilize plants in early spring based on a soil test and the directions printed on the fertilizer container. Nitrogen should be applied annually based on the area to be fertilized, the type of plant, and the diameter of the trunk. Do not fertilize with nitrogen in the late fall as it may cause new soft growth easily damaged by cold weather. 
3. Mulch. Organic mulches (pine needles, wood chips, composted leaves, pine bark, cypress mulch) can help retain moisture during the summer and fall droughts. In the winter this mulch prevents the alternate freezing and thawing of the soil. Mulch will also cool the soil in summer. 
4. Screens. Screens may be used to protect trees and plants in areas exposed to wind and sun, but it is best not to plant tender plants in these exposures. 
5. Exposure. Other factors which can result in scorch are excessive fertilizer, deicing salt, herbicide, dog urine, trash fires, leaking sewer or gas mains, girdling roots or strangling wires, vehicle exhaust, and heat reflected from buildings. Elimination of the exposure to these elements is the only correction. 
6. Physical hazards. Avoid root injury when digging near trees and shrubs. Care should be taken to not injure the bark and roots when using lawnmowers, weed whips, and edging tools.

Sunburn

Yellowing and shrivelling of lower leaves. Some or all of the plant suddenly wilts, especially in hot weather. Plants may recover in cooler or wetter conditions. Brown or black streaks in the tissue under the bark. These are visible as a circle or part-circle of brown marks, if the stem is cut across transversely, or as brown lines if it is cut lengthways. In woody plants the marks are often in the outer (most recent) growth ring, although older infections that were not fatal may have left similar marks in older, inner growth rings. However, a few plants, such as chrysanthemums and roses, don't usually show these marks when infected. Branch dieback is a common symptom in trees and shrubs. Sometimes only part of the plant may wilt and dead branches may indicate infections which occurred in previous years.

Water the plant regularly, and when possible, provide afternoon shade. Fertilize on schedule, using a low-nitrogen, high-phosphorus fertilizer. Prune off dead and dying branches. You can often get rid of the verticillium wilt fungus in the soil by solarization.

There is no effective treatment for verticillium wilt. For affected vegetables, remove and dispose of the plant; don't compost it. For landscape plants, prune out affected branches and dispose of them immediately. Do not use infected wood for chips for landscape mulch.

Verticillium wilt

Death can occur with a sudden browning of the leaves, as with the red oaks, or over time with gradual leaf loss. P. ramorum infection in twigs can lead to shoot tip dieback and wilting. Shoot tip wilting, or flagging, can be useful in identifying trees that are infected but not showing bleeding symptoms.

Truly, the best defenses against Sudden Oak Death include avoiding moving the host plant material long distances, knowing exactly where the disease is, and avoiding traveling in infected areas.

There is no treatment for sudden oak death. A fungicide can be used to allay some of the symptoms but it cannot be cured. Preventative actions are the most successful, by creating barriers between infected and non-infected areas and removing infected plants after they've been diagnosed.

Sudden oak death

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Wilting. This is the classic sign of an under watered plant. Too little water causes a plant to lose turgor, the rigidity in cells and tissues. There are some diseases that can trigger wilting, but the easiest and most likely explanation is under watering. Dry soil. If the soil around a plant is dry, it may need more water. Exceptions to this are some succulents, like cacti, which don’t need much water because they can store it so well. Dry, dead leaf tips. When a plant doesn’t get enough water, the tips and edges of leaves dry out and turn brown. Ultimately, entire leaves will brown and die. Slow growth. If you are chronically under watering a plant, but still giving it enough water to survive, growth will be slower than normal or expected. New growth, such as leaves, may be small. Visible footprints. For a sign that turf grass is not getting adequate water, look to your footprints. After you step on the grass, it should bounce back quickly. If the footprints remain visible for several minutes, the grass is too dry.

Mulch plants with a 3-to-4-inch layer of organic mulch (woodchips, shredded bark) to reduce soil evaporation and temperature fluctuations, and to conserve moisture. Irrigate slowly so water percolates down into the soil. Do not fertilize unless adequate irrigation is available.

Most garden plants, flowers, and shrubs do best when they receive at least 1 inch of water per week, although they may need more during hot, dry spells. Rain isn't always sufficient at supplying enough water for plants to thrive, so don't count on it to keep plants healthy.

Water deficiency

A diagnostic feature of this disease is the presence of many dark-brown, pimple-like structures called pycnidia (fruiting bodies of the fungus) that are readily visible in the tan centers of the spots. When spots are numerous, affected leaves turn yellow and eventually shrivel up, brown, and drop off.

Use disease-free seed. There's no evidence that this fungus is carried by seeds, but err on the safe side and don't save seed from infected plants. Thoroughly processing the tomato seeds you are saving will also help rid the seeds of lingering diseases.
Start with a clean garden. Dispose of all affected plants. The fungus can over-winter on the debris of diseased plants. It's important to dispose of all the affected plants far away from the garden and the compost pile. Keep in mind that it may have spread to your potatoes and eggplants, too.
Avoid overhead watering. Water aids the spread of Septoria leaf spot. Keep it off the leaves as much as possible by watering at the base of the plant only. Of course, it's impossible to keep the rain off your plants, but every little bit helps.
Provide room for air circulation. Leave some space between your tomato plants so there is good airflow. Stake them so that they are not touching the ground and not all bunched together. Good air circulation is especially important during damp and rainy periods.
Mulch below the plants. A layer of mulch will help prevent spores on the ground from splashing up onto the lower leaves.
Plant next year's tomatoes in a different section of your garden. In small gardens, it's not always practical to rotate your crops, so good clean up and sanitation become even more important.

Removing infected leaves. Remove infected leaves immediately, and be sure to wash your hands and pruners thoroughly before working with uninfected plants.
Consider organic fungicide options. Fungicides containing either copper or potassium bicarbonate will help prevent the spreading of the disease. Begin spraying as soon as the first symptoms appear and follow the label directions for continued management.
Consider chemical fungicides. While chemical options are not ideal, they may be the only option for controlling advanced infections. One of the least toxic and most effective is chlorothalonil (sold under the names Fungonil and Daconil).

Septoria leaf spot

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

The spots on cucurbit leaves produced by the Phoma blight are usually more irregular in shape and most often are on the margin of the leaves. The spots are light brown on cantaloupe and cucumber and dark brown on watermelon. Fewer lesions are produced on stems but symptoms also tend to spread from the crown of the plant, giving the plant a blighted appearance. Fruit are generally not affected.

Crop rotations with nonhost plants such as small grain, corn, of two or more years are effective in reducing the incidence if disease-free seed are used. Currently no varieties are resistant.

A fungicide such as benomyl (Benlate), chlorothalonil (Bravo), copper, maneb (Manzate D or Dithane M-22 Special), mancozeb (Dithane M-45 or Manzate 200) or Dikar (Polyram) may be used to control the disease in the field. It is important to start the spray schedule as soon as the plants emerge and spray at 7-10 day intervals, covering all plant surfaces. High pressure (400 psi), high volume (100 gal/acre for a mature crop) spray equipment provides most effective coverage.

Phoma blights

The most common sign of anthracnose is the spots that appear on new leaves. These spots are irregularly shaped and are tan, brown, or black in color. In some trees, these spots appear all over the leaves and on others they may appear along the leaf veins.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.

Anthracnose diseases typically do not kill the host directly, however, repeated infections on woody plants over a period of years may lead to a general decline and dieback. Control of anthracnose diseases becomes important when the host is economically important and the goal is production for fruit or lumber. Otherwise, anthracnose diseases generally go unattended and raise concern only when premature leaf drop calls attention to the situation.

Anthracnose

Springtails occasionally feed on plant roots, but the damage is minimal. Problems arise when these pests congregate in moist areas and multiply. Thousands of springtails blanket walls, foundations and patios as their numbers grow. If not stopped outdoors, springtails multiply indoors in damp basements, kitchens and bathrooms — anywhere with sufficient moisture.

It is not difficult to keep this insect at bay. First of all ensure that house plants are always grown in sterile potting compost (this will also help keep away the diseases that the soil can contain).
If there is insufficient drainage, the compost can become waterlogged, so, next, always ‘crock’ a pot with a layer of grit or clay pellets before adding compost. If the compost to be used is too compact, coarse sand or perlite can be added to make it more free-draining.
If you find it difficult to assess when to water use a moisture meter, a self-watering cone or a container with a reservoir. In the latter cases, the compost takes up water gradually as it dries out, ensuring an even supply.

1 First of all, stop watering the plant and allow it almost to dry Out before re-watering. ‘This may be enough to eradicate these pests. It not, then you will need to use a chemical.
2 Use a suitable chemical, in granule form or diluted with water, to soak the potting mixture.
3 Insecticides containing diazmon, lindanc, malathion, pyrethrum or resmethrin are suitable. Make sure that due ingredients of an insecticide are listed on its label. One application of the chemical should be enough but repeat the application after 8 days to ensure eradicating ideal conditions for springtails.
4 If your plants are infested with Springtails, you will know as soon as you water them, as these tiny insects will start jumping about on top of the potting mixture.
5 Springtails will thrive in waterlogged soil so always water very carefully and ensure that the plant has good drainage.

Springtails

Mealybugs have needle-like sucking mouthparts. Feeding activity can cause a yellowing of host leaves, distorted growth, premature leaf drop, and, with heavy populations, plant death. Mealybugs also produce large amounts of a sweet, sticky liquid waste product called honeydew. A black fungus called sooty mold may grow on the honeydew.

This pest is usually brought into the interiorscape on an infested plant. Therefore, one of the best ways to manage mealybugs on houseplants is to carefully check plants being considered for purchase and reject any infested plants. Quarantine new plants for 7-10 days in an isolated spot, and check for signs of mealybugs or other household pests before adding the plants to your interiorscape.
Provide proper cultural control so that the plants are vigorous and can tolerate moderate mealybug feeding without suffering too much damage. Do not over-water or over-fertilise — mealybugs are attracted to plants with high nitrogen levels and soft growth. Removing overwintering sites, such as loose bark, can help to reduce mealybug numbers. Predatory insects, such as lacewings, syrphid flies, ladybirds, and several small parasitic wasps, prey on outdoor mealybugs and can often keep their numbers down. An introduced beetle, Cryptolaemus montrouzieri, the mealybug destroyer, is available commercially for release in greenhouses. Avoid the unnecessary use of insecticide to minimise any adverse effect on these beneficial insects. Manage ants, which are attracted to honeydew produced by the mealybugs and will inhibit the activities of natural enemies.

1 Wash them away: Mealybugs can be dislodged with a steady stream of water. Repeat the treatment as necessary. This is best for light infestations.
2 Insecticidal soap: Insecticidal soaps are available on the market, or you can make your own by using a dish detergent such as Ivory Liquid. Try to find a product free of perfumes and additives that might harm plants. Mix the soap in a weak concentration with water (starting a 1 teaspoon per gallon and increasing as necessary). Spray on plants.
3 Neem oil: Neem oil is derived from the neem tree. Use according to label instructions. In addition to its insecticidal properties, neem is also a fungicide and has systemic benefits (meaning the plant absorbs it so it can control insects it doesn't directly contact). According to the Environmental Protection Association, neem is safe for use on vegetables and food plants as well as ornamentals.
4 Kitchen insect spray: This all-purpose insect spray. To make a batch, combine 1 garlic bulb, 1 small onion, and 1 teaspoon of cayenne pepper in a food processor or blender and process into a paste. Mix into 1 quart of water and steep for 1 hour. Strain through a cheesecloth and add 1 tablespoon of liquid dish soap. Mix well. The mixture can be stored for up to 1 week in the refrigerator.

Mealybug Pests

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

These insects are so small (a few millimeters in length), that winds can transport them for fairly long distances. They are often green, but might be red or brown, as well. They move quite slowly and cannot jump or hop. Aphids excrete a sugary liquid called honeydew, because the plant sap from which they feed contains excess carbohydrates relative to its low protein content. To satisfy their protein needs, they absorb large amounts of sap and excrete the excess carbohydrates. Honeydew is used as food by ants, honeybees, and many other insects.

Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before.

Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging. You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap.

Aphididae

Leaf curl and distortion. Leaf yellowing or stippling. Necrotic leaf spots. White sporulation of the pathogen on lower leaf surface. Defoliation.

Use hygiene measures. Start clean, remove crop residues and prevent splashing water.

One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Peronosporea

Plants infected by chrysanthemum white rust exhibit spots on the upper surfaces of leaves. These spots are initially pale-green to yellow in color and up to 5mm in diameter, but may turn brown as the tissue becomes necrotic. On the underside of the leaf, the spots develop into pink or white pustules that become prominent as the teliospores develop.

Buy cuttings from a reliable source. Inspect them when they come in and regularly thereafter for symptoms of white rust. Water with drip tapes or individual emitters if possible to avoid splashing spread via overhead irrigation.

Keep susceptible cultivars isolated. Pick off and burn affected leaves. Use cuttings from healthy plants only. Remove plant debris and escaped plants. Keep humidity low, and avoid wetting foliage.

Chrysanthemum white rust

A sign of plant disease is physical evidence of the pathogen. For example, fungal fruiting bodies are a sign of disease. When you look at powdery mildew on a lilac leaf, you’re actually looking at the parasitic fungal disease organism itself (Microsphaera alni). Bacterial canker of stone fruits causes gummosis, a bacterial exudate emerging from the cankers. The thick, liquid exudate is primarily composed of bacteria and is a sign of the disease, although the canker itself is composed of plant tissue and is a symptom.

Good gardening habits and effective treatment help prevent, stop and control fungal disease
1. Start by planting healthy stock. 
2. Choose planting sites based on plant needs. 
3. Avoid overhead watering. 
4. Water early in the day. 
5. Don't crowd plants. 
6. Don't work a wet garden. 
7. Treat with a trusted, proven fungicide.

Baking soda, soap, and water is one of the safer ways to treat plant fungus issues, especially if the affected plants are inside your home. You really don't want to be spraying fungicide all over the inside of your home if you can avoid it!

Fungi

General symptoms can include one or more of the following symptoms: curling or cupped leaves, stunted growth, discolored leaves, or leaves with dead spots. The same herbicide may cause different symptoms on different plant species. Since herbicides do not leave a "calling card" like mites, insects, and diseases (but the damage they cause can be mistaken for herbicide damage), it is advised to rule these out first. Other disorders that produce symptoms that can resemble herbicide damage include virus diseases, adverse weather, salt damage, drought, soil compaction, misapplied fertilizers, root stress, and nutrient deficiencies. Excluding these as causes requires close examination of the site and attention to patterns. Is the pattern of damaged plants consistent with drifting spray? Is more than just one kind of plant affected? Did the symptoms appear within one or two days (in most cases) of the suspected application of an herbicide? Were any lawn weed control products used in the area, including weed and feed products containing an herbicide? The answer to these and other questions can help make a circumstantial case of herbicide damage.

Use shielded booms to minimize herbicide off-target movement. Use spray additives within label guidelines to reduce production of small spray droplets. This will result in less potential for drift. Avoid tank mix ammonium sulfate with volatile herbicides as ammonium sulfate increases volatility.

Organic strategies that help plants recover from herbicide damage are those that aid in maintaining plant vigor:  water during dry periods; fertilize with organic fertilizer according to a soil test report; and watch for and control any insect or disease problems using organic approaches.

Herbicide damage

Sunscald symptoms will appear as yellow or white lesions on foliage and/or fruits. The lesions eventually may turn brown and/or shrivel. Foliage that is commonly affected includes impatiens, hosta, rhododendron, garden beans, peas, peppers and tomatoes.

When it comes to protecting your fruit plants and vines, common sense care is the best medicine for fruit sunscald prevention. Place the plants where they get enough shade in the afternoon. Give them the right amount of water and fertilizer, and be careful when you prune the branches and vines.

For plants already suffering, use a sunshade to restrict their exposure to UV light. Slowly give them more time each day with the sunshade removed until they are toughened up. This process can take about two weeks, at which time your plant should be ready for the sun.

Sunscald

Canker, plant disease, caused by numerous species of fungi and bacteria, that occurs primarily on woody species. Symptoms include round-to-irregular sunken, swollen, flattened, cracked, discoloured, or dead areas on the stems (canes), twigs, limbs, or trunk.

Control includes removing diseased parts in dry weather; growing adapted or resistant varieties in warm well-drained fertile soil; avoiding overcrowding, overwatering, and mechanical wounds; treating bark and wood injuries promptly; controlling insect and rodent disease carriers; wrapping young trees to prevent.

The main measures for controlling the residue are the destruction of vegetation after harvest; cutting and burning of plant parts most severely damaged by anthracnose; spraying with 1% Bordeaux liquid.

Canker

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Cucurbits infected with tospovirus exhibit a variety of symptoms. Leaves can show bronzing to severe systemic chlorotic spotting. Other symptoms include leaf deformation, mosaic, die-back and overall plant stunting. Fruit symptoms can range from chlorotic ring spots on young fruit to necrotic lesions on older fruit.

Keep the greenhouse free of weeds inside and around the outside, since both thrips and tospoviruses are easily harbored in greenhouse weeds. When new cuttings or plugs arrive, check them for thrips or virus symptoms immediately. You can also employ virus indicator plants in the greenhouse.

Infected plants cannot be cured. Control measures aim to prevent or reduce the levels of disease in crops by removing or avoiding sources of virus infection and minimising spread by thrips.

Tospovirus

Leaves - abnormal colours, abnormal leaf fall, abnormal leaf fall, internal feeding, wilting.

Avoid heat sources such as radiators. Protect the plant from direct sunlight during the hotter hours if placed behind a window. The temperature must never drop below 60°F (15°C).

Maintain a regular watering schedule. Water stephanotis regularly during the first growing season. Fertilize with a balanced mix. Scatter about 1/4 cup of dry fertilizer on the soil around the plant in early spring.  Prune in late winter or early spring.

Stephanitis

Fungus gnat damage will appear similar to that of any other root-related issue, such as root rot. Lower leaves may turn yellow and drop, and the plant’s growth may slow down or stop completely. In particularly bad cases, wilting of the entire plant could occur, followed by the death of the plant if roots are extremely damaged. 
In small numbers, fungus gnats are more of an annoyance than anything. In fact, the adult gnats don’t actively harm plants nor people. If their population gets out of hand, however, the larvae may start feeding on plant roots, causing notable damage. This is especially bad for young plants, such as seedlings, which have only a few delicate roots. Fungus gnats are also capable of spreading the plant pathogen that causes damping off and the eventual death of seedlings.

1. Keep soil dry: Fungus gnats seek out moist soil, so allowing your houseplants to dry out a bit between waterings can slow down or stop an infestation. Let the top inch or two of soil dry out before watering again, and try to go as long as possible between waterings. Gnats may be deterred from laying their eggs if the soil is dry on the surface.
2. Mosquito dunks (with beneficial bacteria): Mosquito dunks are used to keep mosquito larvae from populating fountains, animal troughs, fish ponds, and other small bodies of water. The product consists of a dry pellet containing a type of bacteria called Bacillus thuringiensis subspecies isrealensis. This beneficial bacteria infects and kills the larvae of flying insects, including mosquitoes, fruit flies, and fungus gnats.
To use mosquito dunks: Fill up a gallon jug (or watering can) with clean water and toss in a mosquito dunk. It’s a good idea to break up the dunk a bit before placing it in the water, or you can wait for it to soften before breaking it apart. Let the dunk soak in the water for as long as possible (at least overnight), then remove it from the water (the dunk can be reused) and use this water for fungus gnat–infested plants. The bacteria will have leeched into the water and will now infect and kill any larvae that come into contact with it in the soil. Repeat this process every time you water your plants for at least a few months.
3. Cover drainage holes: Though gnats typically remain near the tops of pots, they may find their way to the drainage holes on the underside of a pot and start laying eggs there, too. If this happens, cover the drainage holes with a piece of synthetic fabric to prevent the gnats from getting in or out of the hole, but to also let water pass through freely. Attach with tape or rubber bands.

Getting rid of fungus gnats is all about consistency. Catching the adults is fairly easy, but because the adult population comes in cycles, you need to make sure that your traps are refreshed regularly. For the best results, use a combination of the traps :
1. Sticky cards traps: These traps consist of a yellow note card covered in a sticky adhesive. They are most effective when cut into small squares and placed directly on top of the soil or attached to skewers just above the soil. Adult gnats will fly or crawl onto the card and become trapped. Fungus gnats are attracted to the color yellow, so use the yellow sticky cards rather than the blue ones. 
2. Cider-vinegar traps: Simple and effective, cider-vinegar traps consist of a shallow container with a small amount of apple cider vinegar, water, and liquid dish soap.
To make a cider-vinegar trap: Find a shallow container—a tuna can is perfect—and fill it with equal parts water and apple cider vinegar. (The liquid should be at least ¼-inch deep.) Put a few drops of liquid dish soap into the mixture and stir gently. Place the trap near the base of the affected plant or, ideally, inside the pot on top of the soil. Check it every few days to refresh with new vinegar and water.
3.Flypaper: Flypaper ribbons, such as those hung in horse barns to catch outdoor flies, can also be used to catch fungus gnats. However, these traps are usually overkill for gnats and can easily get stuck to things you don’t want them to stick to, such as furniture, hair, plants, and so on.

Fungus Gnats

Plant stunting and severe curling of leaves occur when the leafhopper Empoasca fabae punctures the undersurfaces of leaves and veins of bush beans and inhibits growth. This leafhopper also feeds on alfalfa and causes leaves to turn yellow and drop off.

Try to avoid moisture or humidity relationships as they affect the habitats of homopterans.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Homoptera

Wilting, stunting, uneven plant growth, crown rot, plant death. Roots are discolored, the cortex may slough off, leaving the vascular cylinder.

Fertilize carefully with a slow-release formula in summer months. Water long and sparingly (no more than once a week), early in the day. This way, grass blades have a chance to dry out before nightfall. Aerate the soil to prevent thatch buildup and to loosen compacted, poorly draining soil.

For warm-season Pythium diseases, time fungicide applications preventively or at the very first onset of disease symptoms.

Pythium diseases

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

When late blight infects stems, everything above the infection site dies. Infected tomato fruits develop rough, leathery spots or dark, water-soaked areas that rot rapidly. Potato tubers bear dark, irregular spots on the surface and reddish-brown spots that extend down into the flesh. Decay continues after harvest.

Fungicides for the control of potato blight are normally only used in a preventative manner, optionally in conjunction with disease forecasting. In susceptible varieties, sometimes fungicide applications may be needed weekly. An early spray is most effective. The choice of fungicide can depend on the nature of local strains of P. infestans. Metalaxyl is a fungicide that was marketed for use against P. infestans, but suffered serious resistance issues when used on its own. In some regions of the world during the 1980s and 1990s, most strains of P. infestans became resistant to metalaxyl, but in subsequent years many populations shifted back to sensitivity. To reduce the occurrence of resistance, it is strongly advised to use single-target fungicides such as metalaxyl along with carbamate compounds. A combination of other compounds are recommended for managing metalaxyl-resistant strains. These include mandipropamid, chlorothalonil, fluazinam, triphenyltin, mancozeb, and others. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against late blight.

Ridging is often used to reduce tuber contamination by blight. This normally involves piling soil or mulch around the stems of the potato blight meaning the pathogen has farther to travel to get to the tuber. Another approach is to destroy the canopy around five weeks before harvest, using a contact herbicide or sulfuric acid to burn off the foliage. Eliminating infected foliage reduces the likelihood of tuber infection.

Late blight

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

Typical symptoms of potassium deficiency in plants include brown scorching and curling of leaf tips as well as chlorosis (yellowing) between leaf veins. Purple spots may also appear on the leaf undersides. Plant growth, root development, and seed and fruit development are usually reduced in potassium-deficient plants. Often, potassium deficiency symptoms first appear on older (lower) leaves because potassium is a mobile nutrient, meaning that a plant can allocate potassium to younger leaves when it is K deficient. Deficient plants may be more prone to frost damage and disease, and their symptoms can often be confused with wind scorch or drought. The deficiency is most common in several important fruit and vegetable crops; notably potatoes, brassicas, tomatoes, apples, currants, gooseberries, and raspberries. Sugar beets, cereals, and clover are also commonly affected.

The best way to prevent or solve this deficiency, is to add a potassium fertilizer to the plant. If necessary, it can be added to the nutritional feeding schedule if the shortage keeps occurring.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, vermiculite, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content but must be used cautiously due its effect on pH level. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Potassium deficiency

General symptoms on the solanaceous crops and cucurbits include seed rot and seedling blight which discolors the roots and causes seedlings to topple over. Preemergence and postemergence damping-off are also possible symptoms that may occur.

Avoid overhead watering that can produce surface runoff, and consider slow drip irrigation instead. Hardy Phytophthora blight pathogens will survive in both hot summer and cold winter compost piles. Remove infected plants immediately, bag and dispose of infected debris, and always keep your garden clean.

Crop rotation may reduce the number of pathogens in the soil and, "a minimum of a 3 years crop rotation which alternates with non-host species is recommended to avoid build-up of P. capsici spores." Crops should also avoid conditions that would be conducive to the pathogen by using well drained soils and raised beds. As stated above, "Excess moisture is the single most important component to the initial infection and subsequent spreading of Phytophthora capsici. Overall, a study by K.H. Lamour and M.K. Hausbeck found that "crop rotation and mefenoxam are not likely to provide economic control". Mefenoxem is the active enantiomer contained in the racemic fungicide metalaxyl used to defend against Phytophthora capsici. Sexual recombination provides the genetic diversity to promote resistance towards fungicides in P. capsici. The failure of crop rotation as a means to control P. capsici may also be due to weeds playing the role of an alternative host in the absence of common hosts. According to a study done by the University of Florida, "In Florida, and perhaps elsewhere, weeds may contribute to pathogen survival in the absence of a host crop or when propagules may not readily survive in soil or plant debris." To avoid fruit rot of vegetable crops in the Cucurbitaceae, trellising cucurbit fruits and other ways to keep the fruit off the ground is a way to control secondary inoculants (zoospores) from physically being splashed from the soil onto the fruit. Control of Phytophthora capsici is easier in drier climates with less rainfall such as California. In these areas, it is important to practice placing drip irrigation emitters away from the stems of pepper plants in order to reduce the incidence of crown rot in peppers.

Phytophthora blight

Phyllosticta causes circular leaf spots with brown/reddish borders. The spots can be really large covering a large area of the leaf. Initial symptoms include small watersoaked regions on the leaves. lesions become more apparent with a ring-like pattern at alter stages.

Repeated applications of fungicides such as Dithane M45, Captan, Ferbam, Mancozeb or thiophanate-methylbased treatments will help control infection levels and can prevent new infections in healthy plants, but it is difficult if not impossible to completely eradicate the fungus in an infected host plant.

Hairy Medic

(Medicago monspeliaca)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists