Rust diseases come in different varieties and can affect a wide range of plants. People often struggle with rust on their roses. It is easy to remember the defining characteristics of this fungus, as they match its name. Rust plant disease will look similar to the rust that appears on that old bicycle in the shed.
- Look for yellow or white spots forming on the upper leaves of a plant.
- Look for reddish to orange blister-like swellings called pustules on the undersides of leaves.
- Orange or yellow spots or streaks appear on the undersides of the leaves.
- Within these spots that form are spores.
- Usually leaf distortion and defoliation occur.

Signs of damage

- Dust your plants with sulfur early in the season to prevent infection or to keep mild infections from spreading.
- Space your plants properly to encourage good air circulation.
- Avoid wetting the leaves when watering plants.
- There are many effective rust fungicides you can try.

How to prevent

1 Select rust-resistant plant varieties when available.
2 Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris.
3 Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day. Drip irrigation and soaker hoses can be used to help keep leaves dry.
4 Use a slow-release, organic fertilizer on crops and avoid excess nitrogen. Soft, leafy, new growth is most susceptible.
5 Apply copper sprays or sulfur powders to prevent infection of susceptible plants. For best results, apply early or at first sign of disease. Spray all plant parts thoroughly and repeat every 7-10 days up to the day of harvest.
6 Effectively treat fungal diseases with SERENADE Garden. This broad spectrum bio-fungicide uses a patented strain of Bacillus subtilis and is approved for organic gardening. Best of all, it’s safe to use — you can treat and pick crops the same day!
7 Containing sulfur and pyrethrins, Bonide® Orchard Spray is a safe, one-hit concentrate for insect attacks and fungal problems. For best results, apply as a protective spray (2.5 oz/ gallon) early in the season. If disease, insects or wet weather are present, mix 5 oz in one gallon of water. Thoroughly spray all parts of the plant, especially new shoots.
8 Prune or stake plants and remove weeds to improve air circulation. Make sure to disinfect your pruning tools (one part bleach to 4 parts water) after each cut.
9 Use a thick layer of mulch or organic compost to cover the soil after you have raked and cleaned it well. Mulch will prevent the disease spores from splashing back up onto the leaves. Burn or bag infected plants after the growing season . Do NOT compost.

Treat

main

description

description_sm

description_sm_2

Leaf Rust

Signs of sap-sucking insect injury consist of enlarged growths or galls, leaf curling, bleaching, or yellowing of foliage. Conifers are more severely injured than hardwoods.

Use insecticidal soap, kelthane, or malathion to control the mites. Control of sucking insects with insecticides is often difficult because of the insects' capacity to reproduce rapidly. Also, they may develop resistance to the chemicals. Often a blast of water from a garden hose will knock the pests off the plant.

There are many natural enemies that help control sap-sucking insects and mites. Insecticide use can sometimes prolong infestations by killing natural enemies of these insects.

Impact of sap-sucking insects

General symptoms on the solanaceous crops and cucurbits include seed rot and seedling blight which discolors the roots and causes seedlings to topple over. Preemergence and postemergence damping-off are also possible symptoms that may occur.

Avoid overhead watering that can produce surface runoff, and consider slow drip irrigation instead. Hardy Phytophthora blight pathogens will survive in both hot summer and cold winter compost piles. Remove infected plants immediately, bag and dispose of infected debris, and always keep your garden clean.

Crop rotation may reduce the number of pathogens in the soil and, "a minimum of a 3 years crop rotation which alternates with non-host species is recommended to avoid build-up of P. capsici spores." Crops should also avoid conditions that would be conducive to the pathogen by using well drained soils and raised beds. As stated above, "Excess moisture is the single most important component to the initial infection and subsequent spreading of Phytophthora capsici. Overall, a study by K.H. Lamour and M.K. Hausbeck found that "crop rotation and mefenoxam are not likely to provide economic control". Mefenoxem is the active enantiomer contained in the racemic fungicide metalaxyl used to defend against Phytophthora capsici. Sexual recombination provides the genetic diversity to promote resistance towards fungicides in P. capsici. The failure of crop rotation as a means to control P. capsici may also be due to weeds playing the role of an alternative host in the absence of common hosts. According to a study done by the University of Florida, "In Florida, and perhaps elsewhere, weeds may contribute to pathogen survival in the absence of a host crop or when propagules may not readily survive in soil or plant debris." To avoid fruit rot of vegetable crops in the Cucurbitaceae, trellising cucurbit fruits and other ways to keep the fruit off the ground is a way to control secondary inoculants (zoospores) from physically being splashed from the soil onto the fruit. Control of Phytophthora capsici is easier in drier climates with less rainfall such as California. In these areas, it is important to practice placing drip irrigation emitters away from the stems of pepper plants in order to reduce the incidence of crown rot in peppers.

Phytophthora blight

Symptoms vary across plant organs and tissues. B. cinerea is a soft rot that will have a collapsed and water soaked appearance on soft fruit and leaves. Brown lesions may develop slowly on undeveloped fruit. Twigs infected with gray mold will die back. Blossoms will cause fruit drop and injury, such as ridging on developing and mature fruit. Symptoms are visible at wound sites where the fungus begins to rot the plant. Gray masses with a velvety appearance are conidia on the plant tissues are a sign of plant pathogen. These conidia are asexual spores that will continue to infect the plant and surrounding hosts throughout the growing season making this a polycyclic disease. Plants can produce localized lesions when a pathogen attacks. An oxidative burst causes hypersensitive cell death called a hypersensitive response (HR). This soft rot can trigger HR to assist in colonization. Botrytis cinerea, as a necrotrophic pathogen, exploits the dead tissue for its pathogenicity or its ability to cause disease. Susceptible plants cannot use the HR to protect against Botrytis cinerea.

The best way to prevent gray mold is to space out plants so they have room to dry out after rain or watering. Remove infected flowers, leaves and stems. Infected plant parts should be buried or composted. Many flowering plants can recover from gray mold when warm, dry conditions return.

Prune or stake plants to improve air circulation between plants. · If growing indoors use a small clip-on fan to improve air flow.

Gray mold

Primary symptoms of infection include wilting leaves, blight of young shoots, sunken and darkened areas of stems with possible sap or resin flow, cankering on larger stems and branches, browning of the vascular tissue when bark is scraped away, and canopy dieback.

Avoid planting sites prone to spring frosts and use fertilization, irrigation, and weed control practices that discourage late-season growth and promote early hardening off. Sprays for mummy berry and botrytis may help, particularly during flowering.

Prune and discard all blighted stems and cankered branches from the canopy. For trees with thin bark and dense canopies (e.g. Japanese maple and kousa dogwood), annual sanitation pruning of dead stems, especially on interior canopy branches, can help to avoid disease outbreaks in the future.

Phomopsis cankers and blights

Phyllosticta causes circular leaf spots with brown/reddish borders. The spots can be really large covering a large area of the leaf. Initial symptoms include small watersoaked regions on the leaves. lesions become more apparent with a ring-like pattern at alter stages.

Repeated applications of fungicides such as Dithane M45, Captan, Ferbam, Mancozeb or thiophanate-methylbased treatments will help control infection levels and can prevent new infections in healthy plants, but it is difficult if not impossible to completely eradicate the fungus in an infected host plant.

Remove and dispose of affected leaves from infected plants to keep the fungal spores from spreading into the growing environment. Some growers have reported covering the mature lesions with clear nail polish to prevent the dissemination of spores.

Phyllosticta leaf spots

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

A sign of plant disease is physical evidence of the pathogen. For example, fungal fruiting bodies are a sign of disease. When you look at powdery mildew on a lilac leaf, you’re actually looking at the parasitic fungal disease organism itself (Microsphaera alni). Bacterial canker of stone fruits causes gummosis, a bacterial exudate emerging from the cankers. The thick, liquid exudate is primarily composed of bacteria and is a sign of the disease, although the canker itself is composed of plant tissue and is a symptom.

Good gardening habits and effective treatment help prevent, stop and control fungal disease
1. Start by planting healthy stock. 
2. Choose planting sites based on plant needs. 
3. Avoid overhead watering. 
4. Water early in the day. 
5. Don't crowd plants. 
6. Don't work a wet garden. 
7. Treat with a trusted, proven fungicide.

Baking soda, soap, and water is one of the safer ways to treat plant fungus issues, especially if the affected plants are inside your home. You really don't want to be spraying fungicide all over the inside of your home if you can avoid it!

Fungi

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

Leaves - abnormal colours, abnormal leaf fall, abnormal leaf fall, internal feeding, wilting.

Avoid heat sources such as radiators. Protect the plant from direct sunlight during the hotter hours if placed behind a window. The temperature must never drop below 60°F (15°C).

Maintain a regular watering schedule. Water stephanotis regularly during the first growing season. Fertilize with a balanced mix. Scatter about 1/4 cup of dry fertilizer on the soil around the plant in early spring.  Prune in late winter or early spring.

Stephanitis

The spores are hyaline, of various shapes, and are released through a circular apical pore.

To prevent powdery mildew from forming in the first place, avoid low-temperature, high-humidity environments. Do not crowd plants. Do not grow susceptible plants in the shade. Water the soil, not the plants.

Use sulfur-containing organic fungicides as both preventive and treatment for existing infections.

Leotiomycetes

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Yellowing (Chlorosis) occur in the newly emerging leaves instead of the older leaves and usually seen in the interveinal region Fruit would be of poor quality and quantity. Chlorosis occurs in younger leaves because iron is not a mobile element, and as such, the younger leaves cannot draw iron from other areas of the plant. Over time, the yellowing may even turn a pale white or the whole leaf may be affected. Iron deficient plants may overaccumulate heavy metals such as cadmium. Any plant may be affected, but raspberries and pears are particularly susceptible, as well as most acid-loving plants such as azaleas and camellias.

Prevention is the best control. Do not plant chlorosis-susceptible trees in soils having a high pH or in soils low in organic matter. If practical, replace species that are susceptible. When the leaves of plants become chlorotic, always determine the primary cause through a soil test.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II) sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

Iron deficiency

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

Stems will be leggy or stretched out. Leaves turn yellow. Leaves are too small.

Arrange the light sources so that the plant receives the required number of photons.

Make sure your plant gets not too much/not too little light.

Light-related issue

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Initially spots of limited size, slightly concave, appear at the peduncular scar of some fruits, or near growth cracks or various wounds. They gradually spread with a fairly typical dark brown to black colour. The lesions decay further while their perimeter is clearly identified. They eventually cover a large proportion of ripe or unripe fruits if the environmental conditions are favourable. Whatever their development stage, the fruits undergo internal rot extending to the seeds. Brown to black globular structures, pycnidia, can be observed in the damaged tissues. They are spherical and irregularly shaped, ostiolate, and contain many hyaline and unicellular conidia, containing two lipid droplets.

To control fungal outbreaks, as with bacteria, remove all infected plant parts, or plants. You may also choose to apply a fungicide. There are many products available for treatment, organically (copper, sulfur, and baking soda are common) or synthetically.

Dothideomycetes

Browning of leaf margins and/or yellowing or darkening of the areas between the main leaf veins are symptoms of leaf scorch. Due to environmental causes, leaves may dry, turn brown, and become brittle. Look for damage to trees and shrubs on the upper portion on the sunny, southern side and on the windy side. Premature dropping of leaves and twig dieback may occur during the late summer. Symptoms usually appear after drying winds in conjunction with periods of hot, dry weather. Leaf scorch on narrow leaf evergreens appears as brown or purple brown discoloration of the needle tips. If unfavorable conditions become more severe, browning of needles increases. This should not be confused with the browning and shedding of older interior needles. Scorch may result from hot, dry weather in summer or from strong, dry winter winds when the ground is frozen. Symptoms may not become apparent for a month or more after the initial injury. Winter leaf scorch in evergreen plants usually appears as two long, brown areas paralleling the main leaf vein.

1. Plant Thoughtfully. Even your plants that love to soak up the sun need some form of shade to protect them.
2. Use Sunblock. If you can't provide your plants the amount of shade they need, use another method to keep them insulated and keep moisture in the soil around them.
3. Create Shade.

1. Water when needed and maintain plant vigor. Plant in a fertile, well-drained soil at the same depth the plants grew in at the nursery and with an adequate supply of organic matter. Soil should be moist to a depth of 10 to 12 inches after a thorough watering. This should be done about once weekly. It is very important for the trees, especially broadleaf and needled evergreens, to be well watered going into the winter period. Water during this period if seasonal rains are not adequate or during the winter when the soil is not frozen. Annuals and perennials require more frequent watering than most trees and shrubs. 
2. Fertilize. Fertilize plants in early spring based on a soil test and the directions printed on the fertilizer container. Nitrogen should be applied annually based on the area to be fertilized, the type of plant, and the diameter of the trunk. Do not fertilize with nitrogen in the late fall as it may cause new soft growth easily damaged by cold weather. 
3. Mulch. Organic mulches (pine needles, wood chips, composted leaves, pine bark, cypress mulch) can help retain moisture during the summer and fall droughts. In the winter this mulch prevents the alternate freezing and thawing of the soil. Mulch will also cool the soil in summer. 
4. Screens. Screens may be used to protect trees and plants in areas exposed to wind and sun, but it is best not to plant tender plants in these exposures. 
5. Exposure. Other factors which can result in scorch are excessive fertilizer, deicing salt, herbicide, dog urine, trash fires, leaking sewer or gas mains, girdling roots or strangling wires, vehicle exhaust, and heat reflected from buildings. Elimination of the exposure to these elements is the only correction. 
6. Physical hazards. Avoid root injury when digging near trees and shrubs. Care should be taken to not injure the bark and roots when using lawnmowers, weed whips, and edging tools.

Sunburn

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

In the fruits, black or brown lesions (e.g., on pods, scab, and pitting) are common. Infection on the inflorescence produces blight, necrosis, and lesions with flecks and streaks. Infected leaves produce abnormal colors and patterns with dark, necrotic, angular, or irregular areas.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.  Water your plants with a drip sprinkler, as opposed to an overhead sprinkler.. Keep ripening fruits from touching the soil. Remember to rotate your plants every 2 to 3 years.

The best control products were Daconil Ultrex (chlorothalonil), Pageant (pyraclostrobin and boscalid) and Spectro 90WDG (chlorothalonil and thiophanate methyl). In addition, mancozeb (i.e., Dithane and Pentathlon) or copper were also very effective when used preventively.

Colletotrichum

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Thysanoptera

Common, Persian, Chinese, and Japanese lilac leaves develop round to irregularly shaped brown spots with yellow halos. These spots enlarge and blight entire leaves. Succulent twigs are girdled, killed, and turn black.

1. Exclusion or eradication of the pathogen (quarantine and use of pathogen-tested seeds and propagated materials)
2. Use of clean transplants.
3. Monitor crops regularly and use predictive models.
4. Reduce the pathogen levels by crop rotation.
5. Remove weeds and incorporate crop residues that can host the disease.

The most common strategy for controlling diseases caused by Pseudomonas syringae is, as it has been for more than 5 decades, to spray bactericides. These mainly include a variety of copper compounds or other heavy metals, with or without various combinations of fungicides or other pest-control chemicals.

Pseudomonas

Symptoms of infection include a downward curling of the leaves, leaf tip dieback, stunting, necrosis of growing leaf tips, sunken ‘chicken pox-like’ spots on leaves (often with a surrounding halo), stem death and yellowing. Since these symptoms are so generic, extreme caution must be taken when introducing new plants to your greenhouse. Infected plants can not be cured and not all hosts display visible symptoms.

Impatiens necrotic spot control focuses on excluding INSV and preventing its spread. Inspect any plants entering a greenhouse (e.g., new plant shipments, plants moved in from outdoors) for viral symptoms and thrips. Isolate new plants until they are determined to be thrips- and virus-free.

Once you suspect impatiens necrotic spot, treatment won't help – you must destroy the plant immediately. If many plants are infected, it's a good idea to contact your university extension office for testing to confirm the virus is present.

Impatiens necrotic spot virus

These insects are so small (a few millimeters in length), that winds can transport them for fairly long distances. They are often green, but might be red or brown, as well. They move quite slowly and cannot jump or hop. Aphids excrete a sugary liquid called honeydew, because the plant sap from which they feed contains excess carbohydrates relative to its low protein content. To satisfy their protein needs, they absorb large amounts of sap and excrete the excess carbohydrates. Honeydew is used as food by ants, honeybees, and many other insects.

Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before.

Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging. You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap.

Aphididae

Typical leaf symptoms of viral diseases include mosaic patterns, chlorotic or necrotic lesions (Figure 13), yellowing, stripes or streaks, vein clearing, vein banding, and leaf rolling and curling.

Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter. Burn infected plants or throw them out with the garbage. Monitor the rest of your plants closely, especially those that were located near infected plants. Disinfect gardening tools after every use. Keep a bottle of a weak bleach solution or other antiviral disinfectant to wipe your tools down with.

1. Remove all infected plants and destroy them. Do NOT put them in the compost pile, as the virus may persist in infected plant matter.
2. Monitor the rest of your plants closely, especially those that were located near infected plants.
3. Disinfect gardening tools after every use.

Viruses

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

If your plant is not getting enough light, the most common sign is the yellowing and dropping of leaves, stunted leaf growth, elongated stems, and a dull-green color. If your plant is getting too much light, then its leaves will have singed tips, burned patches, or will be falling off (yikes!).

You can prevent this from happening by turning the plant once a week or every time you water. This ensure all leaves are exposed to roughly the same amount of light. All plants will bend towards their light source, and we recommend turning all your houseplants at least once a week to prevent “one-sided” growth.

Most plants will survive illuminance ten times lower than listed below but will not grow as well or bloom. Most plants grown as houseplants are selected because they are already adapted to growing at typical house temperatures, between 15° and 25°C. Exceptions do occur, and some plants require chilling periods at lower temperatures (down to 5° or 10°) in winter when less light is available. Houseplants are generally grown in specialized soils called potting compost or potting soil, not in local natural soil. A good potting compost mixture includes soil conditioners to provide the plant with nutrients, support, adequate drainage, and proper aeration. Most potting composts contain a combination of peat and vermiculite or perlite. Concern over environmental damage to peat bogs, however, is leading to the replacement of peat by coir (coconut fibre), which is a sustainable resource. Sterilised soil can also be used.

Lack of light

Scales or shell-like bumps on plant stems and the underside of leaves. These are the outer coverings of scale insect. Large populations may result in poor growth. Some species of scale insect excrete honeydew, which accumulates on the upper leaf surfaces. This can be colonised by a black non-parasitic fungus known as sooty mould. Some scale insects deposit their eggs under a covering of white waxy fibres in early summer.

Check susceptible plants frequently from spring onwards so action can be taken before a damaging population has developed. When choosing control options you can minimise harm to non-target animals by starting with the methods in the non-pesticide control section. If this is not sufficient to reduce the damage to acceptable levels then you may choose to use pesticides. Within this group the shorter persistence pesticides (that are usually certified for organic growing) are likely to be less damaging to non-target wildlife than those with longer persistence and/or systemic action. Light infestations are of little consequence and can be tolerated. The best time to treat heavy attacks is when the more vulnerable nymphs are present, for many scales out of doors this is during mid-late summer. Scale insects on indoor plants can breed all year round and so there is no best time of year to treat. Note that dead scales can remain firmly attached to the plants. The success of any treatment can be gauged by the extent to which new growth remains free of scale insects.

To get rid of scale insects prune and dispose of infested branches, twigs and leaves. When scale numbers are low they may be rubbed or picked off of plants by hand. Dabbing individual pests with an alcohol-soaked cotton swab or neem-based leaf shine will also work when infestations are light.

Coccoidea

As is common among rusts, the life cycle of Cronartium ribicola includes two host species and goes through five spore stages. This life cycle is termed heteroecious. In the specific case of Cronartium ribicola, the aecial host of this pathogen is the white pine (Pinus subgenus Strobus, family Pinaceae) and the telial hosts are those of the genus Ribes, specifically currants and gooseberries. Species of both telial and aecial hosts have varying levels of resistance or immunity to infection. On the aecial host, the first signs of C. ribicola are yellow or red spots on the Pinus needles, but these are small and can be difficult to see; more visible symptoms on the aecial host includes perennial cankers which appear on the branches within two years of infection. Looking at the infected plant as a whole, the Pinus will appear chlorotic, and stunted with dead branches or tops that turn a bright red color. On the other hand, the telial host, Ribes, can contract yellowish chlorotic leaf spots, but is otherwise not significantly impacted. The signs of C. ribicola on Ribes, come in the form of the pathogen itself as orange pustules on the underside of the leaf.

Examine white pines each year for blister rust flags and cankers. Prune off branches with cankers at a branch union or where the branch meets the trunk.  Infected branches don't require any special kind of disposal because the pathogen cannot survive in dead wood.

Pruning white pine blister rust is the treatment of choice for localized infections, but take care not to spread the spores when you're cutting out diseased tissue. Dispose of any pruned materials immediately in a fire or by double bagging in plastic.

White pine blister rust

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

Canker, plant disease, caused by numerous species of fungi and bacteria, that occurs primarily on woody species. Symptoms include round-to-irregular sunken, swollen, flattened, cracked, discoloured, or dead areas on the stems (canes), twigs, limbs, or trunk.

Control includes removing diseased parts in dry weather; growing adapted or resistant varieties in warm well-drained fertile soil; avoiding overcrowding, overwatering, and mechanical wounds; treating bark and wood injuries promptly; controlling insect and rodent disease carriers; wrapping young trees to prevent.

The main measures for controlling the residue are the destruction of vegetation after harvest; cutting and burning of plant parts most severely damaged by anthracnose; spraying with 1% Bordeaux liquid.

Canker

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

There is no cure for plants that already have damping off.

Rhizoctonia damping-off, blight and rot

Yellowing and shrivelling of lower leaves. Some or all of the plant suddenly wilts, especially in hot weather. Plants may recover in cooler or wetter conditions. Brown or black streaks in the tissue under the bark. These are visible as a circle or part-circle of brown marks, if the stem is cut across transversely, or as brown lines if it is cut lengthways. In woody plants the marks are often in the outer (most recent) growth ring, although older infections that were not fatal may have left similar marks in older, inner growth rings. However, a few plants, such as chrysanthemums and roses, don't usually show these marks when infected. Branch dieback is a common symptom in trees and shrubs. Sometimes only part of the plant may wilt and dead branches may indicate infections which occurred in previous years.

Water the plant regularly, and when possible, provide afternoon shade. Fertilize on schedule, using a low-nitrogen, high-phosphorus fertilizer. Prune off dead and dying branches. You can often get rid of the verticillium wilt fungus in the soil by solarization.

There is no effective treatment for verticillium wilt. For affected vegetables, remove and dispose of the plant; don't compost it. For landscape plants, prune out affected branches and dispose of them immediately. Do not use infected wood for chips for landscape mulch.

Verticillium wilt

Yellowing between the leaf veins, sometimes with reddish brown tints and early leaf fall. Magnesium deficiency is common in tomatoes, apples, grape vines, raspberries, roses and rhododendrons.

Reducing or avoiding calcium-rich foods two hours before or after eating magnesium-rich foods. avoiding high-dose zinc supplements. treating vitamin D deficiency. eating raw vegetables instead of cooking them. quitting smoking.

Epsom salts dissolved in water and sprayed onto foliage and applied around the roots will cure magnesium deficiency. In future, feed plants in spring with balanced plant food that contains magnesium. For rhododendrons and azaleas, feed with a plant food specifically formulated for lime-hating or ericaceous plants.

Magnesium deficiency

All the visible and otherwise detectable changes in the infected plants make up the symptoms of the disease. Symptoms may change continuously from the moment of their appearance until the entire plant dies or they may develop up to a point and then remain more or less unchanged for the rest of the growing season. Symptoms may appear as soon as 2 to 4 days after inoculation, as happens in some localized viral diseases of herbaceous plants, or as late as 2 to 3 years after inoculation, as in the case of some viral, mollicute, and other diseases of trees. In most plant diseases, however, symptoms appear from a few days to a few weeks after inoculation.

Put weather stripping around your windows and doors, and replace any stripping that is worn; Keep any outdoor lights off, and turn off as many lights inside your home as possible, as stink bugs are attracted to light; Pull down window shades and blinds to keep the light from spilling outside at night.

You can either use silicone based caulk to cover the cracks or screens for windows and doors, or you can also spray the exterior of your home in the fall, for a plus of protection. You can use natural pesticides against these insects, if you prefer not to fill your home with chemical pesticides.

Pentatomidae

Most of the time, this pest is identified by the leaf miner damage. Frequently, it appears as yellow, squiggly lines in the leaves. This is where the leaf miner larva have literally bored their way through the leaf. Leaf miner damage can also appear as spots or blotches.

Pick off and destroy badly infested leaves in small gardens. The more healthy the plant, the less chance that leafminers will hurt it. Maintain plant health with organic fertilizers and proper watering to allow plants to outgrow and tolerate pest damage. Keep your soil alive by using compost and other soil amendments.

The most common method to rid plants of leaf miners is to spray general pesticide on the infected plants. The trick to this method of how to kill leaf miners is to spray at right time. If you spray too early or too late, the pesticide will not reach the leaf miner larva and will not kill the leaf miner flies.

Leaf miners

Leaves Go Yellow and Fall Off. Dropping Old and New Leaves Alike.  Wilting, Limp Leaves. Leaves Turning Splotchy Black or Dark Brown.  Mushy Roots Mean Overwatering.  An Overwatered Succulent Will Rot and Turn Mushy.

Soaking the ground for a longer period of time less often, and not watering by hand but using a sprinkler or soaker hose, is the way to handle that situation. Mulch around the plant will also help keep a more even level of moisture.

Move your plant to a shady area even if it is a full-sun plant. Remove any dead or dying leaves. These should be easily recognizable. Check your pot for proper drainage and, if possible, create additional air space around the roots. This will allow oxygen to reach the root zone. Remove any dead or dying roots and keep only the roots that are healthy. Water only when the soil is dry to the touch, but do not let it get too dry. You should also seize all fertilization at this point until the plant is healthy again. Treat with a fungicide.

Water excess and/or uneven watering

Cucurbits infected with tospovirus exhibit a variety of symptoms. Leaves can show bronzing to severe systemic chlorotic spotting. Other symptoms include leaf deformation, mosaic, die-back and overall plant stunting. Fruit symptoms can range from chlorotic ring spots on young fruit to necrotic lesions on older fruit.

Keep the greenhouse free of weeds inside and around the outside, since both thrips and tospoviruses are easily harbored in greenhouse weeds. When new cuttings or plugs arrive, check them for thrips or virus symptoms immediately. You can also employ virus indicator plants in the greenhouse.

Infected plants cannot be cured. Control measures aim to prevent or reduce the levels of disease in crops by removing or avoiding sources of virus infection and minimising spread by thrips.

Tospovirus

Wilting. This is the classic sign of an under watered plant. Too little water causes a plant to lose turgor, the rigidity in cells and tissues. There are some diseases that can trigger wilting, but the easiest and most likely explanation is under watering. Dry soil. If the soil around a plant is dry, it may need more water. Exceptions to this are some succulents, like cacti, which don’t need much water because they can store it so well. Dry, dead leaf tips. When a plant doesn’t get enough water, the tips and edges of leaves dry out and turn brown. Ultimately, entire leaves will brown and die. Slow growth. If you are chronically under watering a plant, but still giving it enough water to survive, growth will be slower than normal or expected. New growth, such as leaves, may be small. Visible footprints. For a sign that turf grass is not getting adequate water, look to your footprints. After you step on the grass, it should bounce back quickly. If the footprints remain visible for several minutes, the grass is too dry.

Mulch plants with a 3-to-4-inch layer of organic mulch (woodchips, shredded bark) to reduce soil evaporation and temperature fluctuations, and to conserve moisture. Irrigate slowly so water percolates down into the soil. Do not fertilize unless adequate irrigation is available.

Most garden plants, flowers, and shrubs do best when they receive at least 1 inch of water per week, although they may need more during hot, dry spells. Rain isn't always sufficient at supplying enough water for plants to thrive, so don't count on it to keep plants healthy.

Water deficiency

Lower leaves are yellow. Plant looks wilted Roots will be rotting or stunted. No new growth. Young leaves will turn brown. Soil will appear green (which is algae)

Rainwater harvesting and recycled wastewater also allow to reduce scarcity and ease pressures on groundwater and other natural water bodies. Groundwater recharge, that allows water moving from surface water to groundwater, is a well-known process to prevent water scarcity.

The provision of water treatment chemicals ensures the provision of safe water.

Water-related issue

Sunscald symptoms will appear as yellow or white lesions on foliage and/or fruits. The lesions eventually may turn brown and/or shrivel. Foliage that is commonly affected includes impatiens, hosta, rhododendron, garden beans, peas, peppers and tomatoes.

When it comes to protecting your fruit plants and vines, common sense care is the best medicine for fruit sunscald prevention. Place the plants where they get enough shade in the afternoon. Give them the right amount of water and fertilizer, and be careful when you prune the branches and vines.

For plants already suffering, use a sunshade to restrict their exposure to UV light. Slowly give them more time each day with the sunshade removed until they are toughened up. This process can take about two weeks, at which time your plant should be ready for the sun.

Sunscald

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Usually the first sign of thrip damage is faded or dirty looking leaves. The leaves will start by turning white or grayish in color, then eventually brown as the damaged areas start to die.
Though it’s possible for thrips to kill a houseplant, it’s rare. Mature, healthy houseplants can handle a pretty heavy infestation. The biggest threat is to small or weak houseplants.
However, not only is a thrip infestation gross, they make your indoor plants look terrible, and heavy damage can stunt their growth. Other common symptoms include:
- Brown stripes on the leaves
- Faded, splotchy, pale-colored leaves
- Parts of the leaves are dying
- Flower buds are malformed, dropping, or won’t open
- Leaves start dropping unexpectedly
- New growth is deformed

Thrips can be difficult to get rid of. So, once you finally win the battle, you want to prevent them from ever coming back!
The good news is that there are a few easy ways to prevent thrips from infesting your houseplants…
- Monitor them on a regular basis for the first signs of an infestation
- Debug all of your plants before bringing them back inside for the winter
- Keep anything that you bring in from your garden (cut flowers, veggies…etc) far away from your houseplants
- Inspect all new houseplants before bringing them home, then quarantine them for a few weeks afterward

The first thing you should do as soon as you spot thrips on a houseplant is to quarantine the infested plant immediately. Then check all of the surrounding houseplants for signs of thrips, and isolate any others you may find.Make sure that you begin treating the infestation right away. Also, to help prevent thrips from spreading, always wash your hands after handling an infested houseplant.
RINSE THE LEAVES
If you can, take your houseplant outside, and rinse the leaves with the hose. That will remove many of the bugs, and quickly knock down their population.You could rinse the leaves in the sink or shower instead, and that will work too. Be sure to use tepid water, and take care not to overwater your houseplant in the process.
INSECTICIDAL SOAP
Soap kills thrips on contact, and will help to give you the upper hand. You can use a pre-mixed organic insecticidal soap, or make your own using 1 tsp mild liquid soap to 1 liter of water.Be sure to spray it directly on the infested leaves to kill the bugs. Insecticidal soap doesn’t have any kind of residual effect, so it’s important to treat them often in order to completely get rid of thrips.
WASH YOUR HOUSEPLANT
You could also try washing the leaves with diluted mild liquid soap, and rinse it off with water. This will kill thrips as well, and help to quickly get the population under control.Make sure you wash the undersides of leaves too, that’s where thrips like to hide. But before washing all of the leaves, it’s best to test the soap on a few first, to make sure it doesn’t damage your houseplant.
NEEM OIL 
It’s a naturally occurring insecticide, and also has a residual effect that will help to deter future infestations.Spray a neem oil solution directly on the leaves and stems. This will kill some of the bugs on contact, and others will die when they feed on the neem oil covered leaves. Either a pre-mixed horticultural oil or a hot pepper wax spray can also be very effective to get rid of thrips on houseplants.
STICKY TRAPS 
Since adult thrips are able to fly, sticky traps can work very well to capture them. Place either yellow or blue sticky traps near the infested houseplant to attract them.

Houseplant Thrips

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

Fungus gnat damage will appear similar to that of any other root-related issue, such as root rot. Lower leaves may turn yellow and drop, and the plant’s growth may slow down or stop completely. In particularly bad cases, wilting of the entire plant could occur, followed by the death of the plant if roots are extremely damaged. 
In small numbers, fungus gnats are more of an annoyance than anything. In fact, the adult gnats don’t actively harm plants nor people. If their population gets out of hand, however, the larvae may start feeding on plant roots, causing notable damage. This is especially bad for young plants, such as seedlings, which have only a few delicate roots. Fungus gnats are also capable of spreading the plant pathogen that causes damping off and the eventual death of seedlings.

1. Keep soil dry: Fungus gnats seek out moist soil, so allowing your houseplants to dry out a bit between waterings can slow down or stop an infestation. Let the top inch or two of soil dry out before watering again, and try to go as long as possible between waterings. Gnats may be deterred from laying their eggs if the soil is dry on the surface.
2. Mosquito dunks (with beneficial bacteria): Mosquito dunks are used to keep mosquito larvae from populating fountains, animal troughs, fish ponds, and other small bodies of water. The product consists of a dry pellet containing a type of bacteria called Bacillus thuringiensis subspecies isrealensis. This beneficial bacteria infects and kills the larvae of flying insects, including mosquitoes, fruit flies, and fungus gnats.
To use mosquito dunks: Fill up a gallon jug (or watering can) with clean water and toss in a mosquito dunk. It’s a good idea to break up the dunk a bit before placing it in the water, or you can wait for it to soften before breaking it apart. Let the dunk soak in the water for as long as possible (at least overnight), then remove it from the water (the dunk can be reused) and use this water for fungus gnat–infested plants. The bacteria will have leeched into the water and will now infect and kill any larvae that come into contact with it in the soil. Repeat this process every time you water your plants for at least a few months.
3. Cover drainage holes: Though gnats typically remain near the tops of pots, they may find their way to the drainage holes on the underside of a pot and start laying eggs there, too. If this happens, cover the drainage holes with a piece of synthetic fabric to prevent the gnats from getting in or out of the hole, but to also let water pass through freely. Attach with tape or rubber bands.

Getting rid of fungus gnats is all about consistency. Catching the adults is fairly easy, but because the adult population comes in cycles, you need to make sure that your traps are refreshed regularly. For the best results, use a combination of the traps :
1. Sticky cards traps: These traps consist of a yellow note card covered in a sticky adhesive. They are most effective when cut into small squares and placed directly on top of the soil or attached to skewers just above the soil. Adult gnats will fly or crawl onto the card and become trapped. Fungus gnats are attracted to the color yellow, so use the yellow sticky cards rather than the blue ones. 
2. Cider-vinegar traps: Simple and effective, cider-vinegar traps consist of a shallow container with a small amount of apple cider vinegar, water, and liquid dish soap.
To make a cider-vinegar trap: Find a shallow container—a tuna can is perfect—and fill it with equal parts water and apple cider vinegar. (The liquid should be at least ¼-inch deep.) Put a few drops of liquid dish soap into the mixture and stir gently. Place the trap near the base of the affected plant or, ideally, inside the pot on top of the soil. Check it every few days to refresh with new vinegar and water.
3.Flypaper: Flypaper ribbons, such as those hung in horse barns to catch outdoor flies, can also be used to catch fungus gnats. However, these traps are usually overkill for gnats and can easily get stuck to things you don’t want them to stick to, such as furniture, hair, plants, and so on.

Eriocaulon Neocaledonicum

(Eriocaulon Neocaledonicum)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists