Bacterial leaf spots show as necrotic, circular or angular lesions and may have a yellowish outline or halo. Early symptoms of bacterial leaf spots show on older leaves and lesions appear water-soaked. Bacterial spots affecting dicytyledounous plants that have net-like leaf veins sometimes take a more angular shape as they are restricted by the large leaf veins. Bacterial spots on monocotyledonous plants with parallel leaf veins have a streak or striped appearance. The most obvious symptom of bacterial leaf spots are the blackening of the spots after infection. Eventually older lesions dry out and become papery in texture. Bacterial spots can also produce white, yellow, light cream or silver bacterial exudate depending on the type of bacteria, which may ooze from splitting lesions and/or from the underside of the spots. Bacterial leaf spots caused by Pseudomonas show red-brown spots which can distort the infected leaves, whilst those caused by Xanthomonas are angular or circular in shape outlined with a yellow halo.

Signs of damage

Prevention of leaf spot disease includes variety selection, crop rotations, plant hygiene and fungicide use for seeds and foliage. To stop the spread of pathogens good sanitation is key as well as the avoidance of handling plants when wet, planting pathogen-free and resistant cultivars and moving out infected plants. Reducing the humidity around plants and in greenhouses by good plant spacing for air circulation, and watering early in the day can also help prevent leaf spot disease. Disinfection of tools and washing of hands is important when handling infected plants. Susceptibility to leaf spot disease can occur due to insufficient or excessive fertilising of plants. Checking plants periodically for any signs and symptoms of disease is also good practice. Avoiding overhead watering and increasing air circulation by pruning plants should be done to prevent humid conditions. Collecting and removing fallen leaves is important in reducing the amount of pathogenic agents on the ground to prevent dispersal of disease.

How to prevent

Certain chemicals are used to treat leaf spot disease, such as the Bordeaux mixture, the first fungicide to have been developed, which treats many fungal and bacterial leaf spots. Other fungicides such as zineb, chlorothalonil and Captan, also treat leaf spot disease and Benomyl specifically treats Cercospora leaf spots, cherry leaf spot and black spot of roses. Thiabendazole is used to treat leaf spot diseases of turf and ornamentals. Both fenarimol and nuarimol are pyrimidines that also treats leaf spot disease. More chemicals include Triazoles an organosphosphate fungicide, Imazalil, Procholora and Fentin hydroxide. Registered fungicides in use are thiophanate methyl, chlorothalonil, ferban and mancozeb.

Treat

main

description

description_sm

description_sm_2

Bacterial leaf spot

Symptoms usually involve necrotic, often water-soaked leaf spots, typically most severe on lower leaves. The spots may be very small at first but develop an angular shape as the movement of the bacteria is limited by leaf veins. Eventually several spots may enlarge, coalesce and cause death of mature leaves.

Reduce humidity to encourage dry foliage and avoid dripping within the greenhouse. Avoid splashing water from plant to plant.  Avoid excess moisture and late day irrigation.

Chemical treatments work best as a preventive measure. Copper-based plant protection products have bactericidal activity (kill bacteria) and can be effective. Disinfection products that contain hydrogen peroxide or quaternary ammonia are also available.

Gammaproteobacteria

The most common sign of anthracnose is the spots that appear on new leaves. These spots are irregularly shaped and are tan, brown, or black in color. In some trees, these spots appear all over the leaves and on others they may appear along the leaf veins.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.

Anthracnose diseases typically do not kill the host directly, however, repeated infections on woody plants over a period of years may lead to a general decline and dieback. Control of anthracnose diseases becomes important when the host is economically important and the goal is production for fruit or lumber. Otherwise, anthracnose diseases generally go unattended and raise concern only when premature leaf drop calls attention to the situation.

Anthracnose

Plant stunting and severe curling of leaves occur when the leafhopper Empoasca fabae punctures the undersurfaces of leaves and veins of bush beans and inhibits growth. This leafhopper also feeds on alfalfa and causes leaves to turn yellow and drop off.

Try to avoid moisture or humidity relationships as they affect the habitats of homopterans.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Homoptera

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Leaf spots start as small brown spots, often with a yellow halo, and grow into irregular brown spots (up to 3/4"). Leaf spots sometimes develop a target-like pattern of rings. Severely infected leaves turn brown, curl upward, wither and die.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging.

Alternaria blight

Symptoms vary across plant organs and tissues. B. cinerea is a soft rot that will have a collapsed and water soaked appearance on soft fruit and leaves. Brown lesions may develop slowly on undeveloped fruit. Twigs infected with gray mold will die back. Blossoms will cause fruit drop and injury, such as ridging on developing and mature fruit. Symptoms are visible at wound sites where the fungus begins to rot the plant. Gray masses with a velvety appearance are conidia on the plant tissues are a sign of plant pathogen. These conidia are asexual spores that will continue to infect the plant and surrounding hosts throughout the growing season making this a polycyclic disease. Plants can produce localized lesions when a pathogen attacks. An oxidative burst causes hypersensitive cell death called a hypersensitive response (HR). This soft rot can trigger HR to assist in colonization. Botrytis cinerea, as a necrotrophic pathogen, exploits the dead tissue for its pathogenicity or its ability to cause disease. Susceptible plants cannot use the HR to protect against Botrytis cinerea.

The best way to prevent gray mold is to space out plants so they have room to dry out after rain or watering. Remove infected flowers, leaves and stems. Infected plant parts should be buried or composted. Many flowering plants can recover from gray mold when warm, dry conditions return.

Prune or stake plants to improve air circulation between plants. · If growing indoors use a small clip-on fan to improve air flow.

Gray mold

Common, Persian, Chinese, and Japanese lilac leaves develop round to irregularly shaped brown spots with yellow halos. These spots enlarge and blight entire leaves. Succulent twigs are girdled, killed, and turn black.

1. Exclusion or eradication of the pathogen (quarantine and use of pathogen-tested seeds and propagated materials)
2. Use of clean transplants.
3. Monitor crops regularly and use predictive models.
4. Reduce the pathogen levels by crop rotation.
5. Remove weeds and incorporate crop residues that can host the disease.

The most common strategy for controlling diseases caused by Pseudomonas syringae is, as it has been for more than 5 decades, to spray bactericides. These mainly include a variety of copper compounds or other heavy metals, with or without various combinations of fungicides or other pest-control chemicals.

Pseudomonas

All members of the class produce basidiocarps which range in size from tiny cups a few millimeters across to a giant polypore (Phellinus ellipsoideus) greater than several meters across and weigh up to 500 kilograms (1,100 lb). Agaricomycetes produce mushrooms, and are therefore the most familiar and conspicuous of all Fungi. Other Fungi produce macroscopic fruiting bodies as well, but the diversity of forms in the Agaricomycetes is unmatched.

A proven fungicide that prevents disease from becoming active and treats it quickly is a crucial part of your protection plan. GardenTech® Daconil® Fungicide, with the active ingredient chlorothalonil, provides protection against a broad spectrum of fungal pathogens and simplifies controlling fungal disease from your garden.

Used as a preventive and an active treatment, Daconil® Fungicide can prevent, control or stop more than 65 types of fungal disease on flowers, vegetables, shrubs, fruit and shade trees.

Agaricomycetes

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

Springtails occasionally feed on plant roots, but the damage is minimal. Problems arise when these pests congregate in moist areas and multiply. Thousands of springtails blanket walls, foundations and patios as their numbers grow. If not stopped outdoors, springtails multiply indoors in damp basements, kitchens and bathrooms — anywhere with sufficient moisture.

It is not difficult to keep this insect at bay. First of all ensure that house plants are always grown in sterile potting compost (this will also help keep away the diseases that the soil can contain).
If there is insufficient drainage, the compost can become waterlogged, so, next, always ‘crock’ a pot with a layer of grit or clay pellets before adding compost. If the compost to be used is too compact, coarse sand or perlite can be added to make it more free-draining.
If you find it difficult to assess when to water use a moisture meter, a self-watering cone or a container with a reservoir. In the latter cases, the compost takes up water gradually as it dries out, ensuring an even supply.

1 First of all, stop watering the plant and allow it almost to dry Out before re-watering. ‘This may be enough to eradicate these pests. It not, then you will need to use a chemical.
2 Use a suitable chemical, in granule form or diluted with water, to soak the potting mixture.
3 Insecticides containing diazmon, lindanc, malathion, pyrethrum or resmethrin are suitable. Make sure that due ingredients of an insecticide are listed on its label. One application of the chemical should be enough but repeat the application after 8 days to ensure eradicating ideal conditions for springtails.
4 If your plants are infested with Springtails, you will know as soon as you water them, as these tiny insects will start jumping about on top of the potting mixture.
5 Springtails will thrive in waterlogged soil so always water very carefully and ensure that the plant has good drainage.

Springtails

A diagnostic feature of this disease is the presence of many dark-brown, pimple-like structures called pycnidia (fruiting bodies of the fungus) that are readily visible in the tan centers of the spots. When spots are numerous, affected leaves turn yellow and eventually shrivel up, brown, and drop off.

Use disease-free seed. There's no evidence that this fungus is carried by seeds, but err on the safe side and don't save seed from infected plants. Thoroughly processing the tomato seeds you are saving will also help rid the seeds of lingering diseases.
Start with a clean garden. Dispose of all affected plants. The fungus can over-winter on the debris of diseased plants. It's important to dispose of all the affected plants far away from the garden and the compost pile. Keep in mind that it may have spread to your potatoes and eggplants, too.
Avoid overhead watering. Water aids the spread of Septoria leaf spot. Keep it off the leaves as much as possible by watering at the base of the plant only. Of course, it's impossible to keep the rain off your plants, but every little bit helps.
Provide room for air circulation. Leave some space between your tomato plants so there is good airflow. Stake them so that they are not touching the ground and not all bunched together. Good air circulation is especially important during damp and rainy periods.
Mulch below the plants. A layer of mulch will help prevent spores on the ground from splashing up onto the lower leaves.
Plant next year's tomatoes in a different section of your garden. In small gardens, it's not always practical to rotate your crops, so good clean up and sanitation become even more important.

Removing infected leaves. Remove infected leaves immediately, and be sure to wash your hands and pruners thoroughly before working with uninfected plants.
Consider organic fungicide options. Fungicides containing either copper or potassium bicarbonate will help prevent the spreading of the disease. Begin spraying as soon as the first symptoms appear and follow the label directions for continued management.
Consider chemical fungicides. While chemical options are not ideal, they may be the only option for controlling advanced infections. One of the least toxic and most effective is chlorothalonil (sold under the names Fungonil and Daconil).

Septoria leaf spot

The first symptom is usually the appearance of minute yellow stippling on the upper surface of leaves that have mites on the undersides. Infested leaves generally become yellow and may drop off from plants. Red spider mites on the back of a leaf (left) and mite damage on a cucurbit leaf (right).

Host plant resistance can be a valuable component of an IPM system that is compatible with other control measures such as chemical control, and it makes beneficial natural enemies more effective. In many cases, even partially resistant cultivars are useful to enhance the efficacy of biocontrol agents.

Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas. On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs. Dust on leaves, branches and fruit encourages mites.

Tetranychidae

Galls are most commonly found near ground level on the roots and lower branches of the plants. As the galls enlarge, they become woody and hard. The outer layer turns brown and corky. The plant may be weakened and stunted with some branch or tip dieback. Symptoms may not develop immediately after infection. Galls grow most rapidly during the warm months of the year.

Limit wounding of plant material. Avoid planting too deep. Avoid mounding soil up on newly planted trees. Keep crown of tree as dry as possible; Agrobacterium is favored by wet environments.

1. Prune out infected material. Crown gall cannot be eliminated from a shrub even though the infected plant may live for many years. To improve the appearance of the plant, prune out and destroy infected stems below the galled area. Sterilize the pruning shears after each cut with a mixture of one part bleach to nine parts water. 2. Destroy infected plants. Destroy the infected plant. The bacterium will remain in the soil so it is important to plant a resistant plant species. If the same species needs to be planted in the area, remove and replace the soil or consider soil sterilization. 3. Sterilize the soil. Soils known to be infected with crown gall bacteria can be sterilized using chemicals, heat, or antibiotics. This is not practical for most home gardeners. A biological control has been introduced using a bacterium, Agrobacterium radiobactor strain 84. This bacterium was discovered to be antagonistic to crown gall bacterium. It is available for use as a preplant treatment by dipping nursery stock in a suspension of the live bacteria in water. 4. Exclude the problem. When purchasing forsythia and euonymus plants, inspect them carefully for signs of galls. Do not purchase plants that show gall-forming symptoms. 5. Replant with a more resistant plant species. The following plants recommended by the University of Illinois show greater resistance to bacterial crown gall: barberry, hornbeam, true cedars, ginkgo, golden raintree, tulip tree, mahonia, spruce, linden, boxwood, catalpa, beech, holly, larch, magnolia, black gum, pine, Douglas fir, bald cypress, hemlock, birch, firethorn, redbud, smoke tree, sweet gum, deutzia, serviceberry, yellowwood, yew, and zelkova.

Crown gall

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Signs of sap-sucking insect injury consist of enlarged growths or galls, leaf curling, bleaching, or yellowing of foliage. Conifers are more severely injured than hardwoods.

Use insecticidal soap, kelthane, or malathion to control the mites. Control of sucking insects with insecticides is often difficult because of the insects' capacity to reproduce rapidly. Also, they may develop resistance to the chemicals. Often a blast of water from a garden hose will knock the pests off the plant.

There are many natural enemies that help control sap-sucking insects and mites. Insecticide use can sometimes prolong infestations by killing natural enemies of these insects.

Impact of sap-sucking insects

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Symptoms of Tobacco Rattle Virus vary based on the plant host, which differs widely in this disease. Common symptoms include mottling, cholortic or necrotic local lesion, ringspots or line patterns, and systemic necrosis.

Abandon fields highly infested with TRV.  Avoid planting TRV-sensitive cultivars. Use virus-free seed. Practice crop rotation using TRV non-host crop alfalfa Control weeds to lower the viruliferous stubby root nematode numbers.

Once plants have become infected with TRV, they remain infected indefinitely. Infected plant cannot be treated in any way to eliminate the virus and should be removed and disposed of by burning, burying or composting.

Tobacco rattle virus

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Rhizoctonia solani can cause seed rot, root rot and lesions on hypocotyls. Damping-off occurs when germinating seedlings are infected prior to emergence. Reddish-brown, sunken lesions form on hypocotyls of young seedlings.

Planting seedlings in warmer soil and getting plants to emerge quickly helps minimize damage. Crop rotation also helps minimize the amount of inoculum that results in infection. A few resistant varieties with moderate resistance to Rhizoctonia can be used, but they produce lower yields and quantity than standard varieties. Minimizing soil compaction helps water infiltration, drainage, and aeration for the plants.

There is no cure for plants that already have damping off.

Rhizoctonia damping-off, blight and rot

Alternaria symptoms once infection begins include small, dark, circular spots that regularly reach ½ inch (1 cm.) in diameter.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging. Conventional gardeners can use chlorothanil, fludioxinil, imazalil, iprodine, maneb, mancozeb, or thiram on plants listed on the label of their chemical of choice, but should still strive for prevention in areas with known Alternaria pathogens.

Alternaria

These insects are so small (a few millimeters in length), that winds can transport them for fairly long distances. They are often green, but might be red or brown, as well. They move quite slowly and cannot jump or hop. Aphids excrete a sugary liquid called honeydew, because the plant sap from which they feed contains excess carbohydrates relative to its low protein content. To satisfy their protein needs, they absorb large amounts of sap and excrete the excess carbohydrates. Honeydew is used as food by ants, honeybees, and many other insects.

Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before.

Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging. You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap.

Aphididae

The spots on cucurbit leaves produced by the Phoma blight are usually more irregular in shape and most often are on the margin of the leaves. The spots are light brown on cantaloupe and cucumber and dark brown on watermelon. Fewer lesions are produced on stems but symptoms also tend to spread from the crown of the plant, giving the plant a blighted appearance. Fruit are generally not affected.

Crop rotations with nonhost plants such as small grain, corn, of two or more years are effective in reducing the incidence if disease-free seed are used. Currently no varieties are resistant.

A fungicide such as benomyl (Benlate), chlorothalonil (Bravo), copper, maneb (Manzate D or Dithane M-22 Special), mancozeb (Dithane M-45 or Manzate 200) or Dikar (Polyram) may be used to control the disease in the field. It is important to start the spray schedule as soon as the plants emerge and spray at 7-10 day intervals, covering all plant surfaces. High pressure (400 psi), high volume (100 gal/acre for a mature crop) spray equipment provides most effective coverage.

Phoma blights

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

Thysanoptera

Mealybugs have needle-like sucking mouthparts. Feeding activity can cause a yellowing of host leaves, distorted growth, premature leaf drop, and, with heavy populations, plant death. Mealybugs also produce large amounts of a sweet, sticky liquid waste product called honeydew. A black fungus called sooty mold may grow on the honeydew.

This pest is usually brought into the interiorscape on an infested plant. Therefore, one of the best ways to manage mealybugs on houseplants is to carefully check plants being considered for purchase and reject any infested plants. Quarantine new plants for 7-10 days in an isolated spot, and check for signs of mealybugs or other household pests before adding the plants to your interiorscape.
Provide proper cultural control so that the plants are vigorous and can tolerate moderate mealybug feeding without suffering too much damage. Do not over-water or over-fertilise — mealybugs are attracted to plants with high nitrogen levels and soft growth. Removing overwintering sites, such as loose bark, can help to reduce mealybug numbers. Predatory insects, such as lacewings, syrphid flies, ladybirds, and several small parasitic wasps, prey on outdoor mealybugs and can often keep their numbers down. An introduced beetle, Cryptolaemus montrouzieri, the mealybug destroyer, is available commercially for release in greenhouses. Avoid the unnecessary use of insecticide to minimise any adverse effect on these beneficial insects. Manage ants, which are attracted to honeydew produced by the mealybugs and will inhibit the activities of natural enemies.

1 Wash them away: Mealybugs can be dislodged with a steady stream of water. Repeat the treatment as necessary. This is best for light infestations.
2 Insecticidal soap: Insecticidal soaps are available on the market, or you can make your own by using a dish detergent such as Ivory Liquid. Try to find a product free of perfumes and additives that might harm plants. Mix the soap in a weak concentration with water (starting a 1 teaspoon per gallon and increasing as necessary). Spray on plants.
3 Neem oil: Neem oil is derived from the neem tree. Use according to label instructions. In addition to its insecticidal properties, neem is also a fungicide and has systemic benefits (meaning the plant absorbs it so it can control insects it doesn't directly contact). According to the Environmental Protection Association, neem is safe for use on vegetables and food plants as well as ornamentals.
4 Kitchen insect spray: This all-purpose insect spray. To make a batch, combine 1 garlic bulb, 1 small onion, and 1 teaspoon of cayenne pepper in a food processor or blender and process into a paste. Mix into 1 quart of water and steep for 1 hour. Strain through a cheesecloth and add 1 tablespoon of liquid dish soap. Mix well. The mixture can be stored for up to 1 week in the refrigerator.

Mealybug Pests

Mealybugs damage crops in a variety of ways. Pupae and females drink the sap of the plant, slowing growth and causing deformation and yellowing of the leaves, sometimes with subsequent leaf fall. The overall effect is a weakening of photosynthesis and hence a decrease in yield.

To keep mealybugs at bay, spray your plants once a week with a solution of neem oil in water. If you coat all plant surfaces, the neem oil will slow or stop feeding on your plants by a wide variety of pests. In addition, the oil coats any eggs or crawlers and will smother them.

Pyrethroids such as permethrin, bifenthrin or cyfluthrin can be used to control mealybugs. Some gardeners use Green Lacewing (Chrysopidae) larvae to control mealybug infestations, as the larval Lacewings are voracious predators of aphids and other small insects.

Pseudococcidae

The leaves become narrower and longer, and with severe damage, the plants become chlorotic and die.

There is no cure for nectria canker, so it is important to take steps to prevent it affecting young and vulnerable trees. Pruning injuries can be a major source of infection, so avoid pruning trees in the fall, especially in wet conditions. Restrict pruning to dry weather and remove any branches or stems that have been infected with the fungus.

Freezing damage is another important way in which trees get infected. For young transplants, providing protection from freezing can prevent the disease. Avoid other types of injury and keep your trees healthy to minimize the risks from nectria infection. This means being careful with the lawnmower around trees, preventing or managing pests, and providing adequate water and nutrients.

Nectriaceae

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

The pathogen causes angular chlorotic lesions on the foliage. These lesions appear angular because they are bound by leaf veins. During humid conditions, inspection of the underside of the leaf reveals gray-brown to purplish-black fungal growth. This downy material is the sporulation of the pathogen. Magnification of the sporulation reveals the acutely and dichotomously branched sporangiophores bearing lemon-shaped sporangia. Eventually, leaves will turn necrotic and curl upwards. The disease is sometimes called wildfire because of how rapidly it progresses, as if the crop were burned by fire. Symptoms on watermelon and cantaloupe are different from on other cucurbits; leaf spots are typically not angular and turn brown to black in color. Often, an exaggerated upward leaf-curling will occur. Regardless of which cucurbit is involved, only the leaves are infected, not fruit, flowers, stems or roots. Disease of the leaves results in three major effects: 1. reduced yields, 2. a greater proportion of misshapen fruit, especially in cucumber, and 3. sunscalded fruit, due to increased exposure to direct sunlight, especially in watermelon and winter squash.

Early detection of downy mildew and immediate or preventative fungicide application is imperative for the control of this disease. A forecasting system exists to assist growers in timing their fungicide applications for maximum benefit. The system tracks outbreaks of the disease and provides a forecast or risk assessment for future outbreaks.

Resistant cultivars - Host resistance is an important tool in disease control and should be used whenever possible. Cultivars resistant to downy mildew have been developed for cucumber and cantaloupe and to a lesser extent for squash and pumpkin. Although cucumber downy mildew has been severe on resistant cultivars, these cultivars are more effective than susceptible cultivars in delaying infection. Chemical control - Chemical control is highly recommended because downy mildew is an aggressive and destructive disease and satisfactory control without the use of fungicides is unlikely. Both protectant and systemic products should be applied. Fungicides are most effective when applied prior to infection and reapplied at 5- to 7-day intervals. The following products have proven to be the most effective fungicides in cucumber downy mildew control in North Carolina trials conducted annually from 2004 to 2008: Presidio (fluopicolide, Valent), Ranman (cyazofamid, FMC), Previcur Flex (propamocarb, Bayer), Curzate (cymoxanil, DuPont), Tanos (famoxadone and cymoxanil, DuPont), and Gavel (zoxamide and mancozeb, Dow AgroSciences). These products should be applied in a program to prevent pathogen resistance, that is, rotated with fungicides of a different mode of action. Protectant fungicides such as chlorothalonil and mancozeb should be used as mixing partners. Вiological control - Although many biological control products have been evaluated for their ability to control downy mildew, none have proven effective and are not recommended for use.

Cucurbit downy mildew

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

In the fruits, black or brown lesions (e.g., on pods, scab, and pitting) are common. Infection on the inflorescence produces blight, necrosis, and lesions with flecks and streaks. Infected leaves produce abnormal colors and patterns with dark, necrotic, angular, or irregular areas.

Plant resistant plants, or buy healthy transplants. Plant your plants in well-drained soil.  Water your plants with a drip sprinkler, as opposed to an overhead sprinkler.. Keep ripening fruits from touching the soil. Remember to rotate your plants every 2 to 3 years.

The best control products were Daconil Ultrex (chlorothalonil), Pageant (pyraclostrobin and boscalid) and Spectro 90WDG (chlorothalonil and thiophanate methyl). In addition, mancozeb (i.e., Dithane and Pentathlon) or copper were also very effective when used preventively.

Colletotrichum

Brown, yellow, gray, or straw-colored needles at tip of current season's growth; needles usually stunted and shoot may curl. Branch dieback. Small, black fruiting bodies on needles, cones, or shoot tissue. Cankers on stems or branches. Oozing resin that adheres to blighted needles.

Preventing the initial infection is a better strategy than attempting to cure a diseased tree. The first line of defense in preventing disease is planting disease free stock, planting in a disease free area, and selecting a disease resistant species. Beyond the selection of clean, resistant stock and planting location, trees that have proper water and nutrient management are healthier and less susceptible to Diplodia tip blight. Controlling wood boring insects that create wounds for Diplodia to exploit, is another cultural practice that can prevent disease. Poor airflow and high humidity are conditions that favor disease development; keeping grass and weeds trimmed down at the base of the tree allows for better airflow and can limit disease development. Once a tree is diseased, the goal is to limit the amount of inoculum present. The blighted needles and cones will have the pycnidia survival structures that contain thousands of spores. Remove debris from the base of the tree and destroy. During dry weather (not during Spring or early Summer), cut away infected shoots, cones, and branches. Sanitary techniques like sanitizing pruning tools between each cut will prevent further spread of the disease.

When disease pressure is high, chemical controls is advised. First, spray should occur early spring at candle elongation. Repeated sprays should occur every two weeks until needles reach full size. Fungicides containing the following active ingredients have been shown to be efficacious: chlorothalonil, methyl, thiophanate-methyl, mancozeb, and copper hydroxide with mancozeb. Always read and follow the label.

Sphaeropsis blight

The term “abiotic disorders” refers to a wide array of plant problems. We use the word “abiotic” to indicate that the symptom is not caused by a biological agent such as an insect, mite or pathogen.

Examine where symptoms first appear on a plant—on new leaves, old leaves or all over? Note the pattern of any discolouration or yellowing—is it all over, between the veins or around the edges? If only the veins are yellow, deficiency is probably not involved. Note general patterns rather than looking at Individual plants—are the symptoms distributed throughout a group of plants of the same type growing together? In the case of a deficiency all of the plants should be similarly effected, although distribution will depend on past treatments applied to the soil. Soil analysis, such as determining pH, can help to confirm the presence of physiological disorders. Considering recent conditions, such as heavy rains, dry spells, frosts, etc., may also help to determine the cause of plant disorders.

Testing soil and fertilizing accordingly. Collecting and testing samples to identify and treat pests or diseases. Aerating compacted soil with an air tool to “fluff” it without damaging roots. Pruning to help a tree recover from damage caused by storms, road salt, or extreme temperatures.

Abiotic

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

Hosta virus X does not kill the plants infected, but Hostas that have been infected do show a variety of other symptoms, such as: Ink-bleed, which makes the plant look discolored in certain spots, and this effect is generally centered on a vein. An example of this is shown in the photo in this article. Desiccation or Collapsed tissue, which can be signs of heavier infection, makes the plant look as if it is dried out. Mottling, which makes the plant appear blotchy. This is not always a symptom of HVX, and could be from another virus, but it should always be treated as an infected plant regardless. A Hosta may no longer express symptoms of the virus when it grows back in the Spring, even though it may have shown symptoms in a previous year. Nonetheless, the plant should still be considered infected with HVX.

The only way to eliminate the disease is to destroy infected plants (and any associated plant debris) by burning (where allowed by local ordinance) or landfilling. DO NOT compost hostas with HVX.

Once a Hosta plant is infected, it will be infected for the rest of its life. Any plant suspected of being infected should be burned if it is legal to do so. If it is not, then it should be tossed in the garbage, but infected Hosta plants should never be composted. If any plant in a batch shows symptoms, the entire batch should be considered infected and be destroyed. Once a plant has been removed, the spot occupied by the Hosta should be left empty for a long time to prevent the spread of the virus to a plant that replaces it. The virus primarily spreads through infected sap, so cutting multiple plants with the same tool can spread the virus. Animals that eat the plants may also spread the virus through sap by eating from an infected plant and then eating from an uninfected plant.

Hosta virus x

Loss of chlorophyll, with the resulting yellowing of the leaves is the most obvious sign of senescence and in some cases, as seen in Figure 1a and c, the additional synthesis of anthocyanins during senescence results in dramatic orange, red and even purple coloration.

Leaf senescence occurs when the leaf is no longer of use to the plant. It is a normal aging process.

Senescence

Botryosphaeria obtusa enters the fruit through wounds. These can be made by insects, birds or growth cracks. At first a brown spot, near the calyx, appears on the fruit. The spot on the fruit then enlarges and black/brown rings appear on the fruit. The fruit holds its shape, however, unlike other fruit diseases. The fruit will then wither up and can remain on the tree for another year before falling off. During this time pycnidia appear on the surface of the rotted fruit.

Start with clean seed. In warm, humid weather, a single infected seed in as many as 10,000 could lead to a black rot outbreak.

The most effective treatment is to prune out the infected areas on trees, to ensure transfer between trees does not occur. Fruit that is infected can stay on the tree for over a year, and therefore remaining fruit should be removed to avoid another source of inoculation for other trees. The trimmed branches or dead fruit should then be burned or disposed of immediately as the organism can survive on the dead tissue for a long period of time. Infection of leaves and fruit can be avoided by spraying them with a fungicide. The treatment for the fungicide should be also kept up to date via the manufacturer's instructions.

Black rot

Plants infected by chrysanthemum white rust exhibit spots on the upper surfaces of leaves. These spots are initially pale-green to yellow in color and up to 5mm in diameter, but may turn brown as the tissue becomes necrotic. On the underside of the leaf, the spots develop into pink or white pustules that become prominent as the teliospores develop.

Buy cuttings from a reliable source. Inspect them when they come in and regularly thereafter for symptoms of white rust. Water with drip tapes or individual emitters if possible to avoid splashing spread via overhead irrigation.

Keep susceptible cultivars isolated. Pick off and burn affected leaves. Use cuttings from healthy plants only. Remove plant debris and escaped plants. Keep humidity low, and avoid wetting foliage.

Chrysanthemum white rust

Symptoms of Cercospora leaf spot first appear as individual, circular spots that are tan to light brown with reddish purple borders. As the disease progresses, individual spots coalesce. Heavily infected leaves first become yellow and eventually turn brown and necrotic.

Avoid overwatering or watering in the late evening to reduce free moisture. Avoid overhead watering where the water can dislodge and disperse spores to uninfected plants. Space plants to encourage air movement and reduce high humidity levels.

For the most part, treating Cercospora leaf spot means preventing the fungi from infecting your plants in the first place.

Cercospora leaf spot

If your plant is not getting enough light, the most common sign is the yellowing and dropping of leaves, stunted leaf growth, elongated stems, and a dull-green color. If your plant is getting too much light, then its leaves will have singed tips, burned patches, or will be falling off (yikes!).

You can prevent this from happening by turning the plant once a week or every time you water. This ensure all leaves are exposed to roughly the same amount of light. All plants will bend towards their light source, and we recommend turning all your houseplants at least once a week to prevent “one-sided” growth.

Most plants will survive illuminance ten times lower than listed below but will not grow as well or bloom. Most plants grown as houseplants are selected because they are already adapted to growing at typical house temperatures, between 15° and 25°C. Exceptions do occur, and some plants require chilling periods at lower temperatures (down to 5° or 10°) in winter when less light is available. Houseplants are generally grown in specialized soils called potting compost or potting soil, not in local natural soil. A good potting compost mixture includes soil conditioners to provide the plant with nutrients, support, adequate drainage, and proper aeration. Most potting composts contain a combination of peat and vermiculite or perlite. Concern over environmental damage to peat bogs, however, is leading to the replacement of peat by coir (coconut fibre), which is a sustainable resource. Sterilised soil can also be used.

Lack of light

The first sign of powdery mildew is pale yellow leaf spots. White powdery spots can form on both upper and lower leaf surfaces, and quickly expand into large blotches. The large blotches can cover entire leaf, petiole and stem surfaces. When powdery mildew infects the majority of the foliage, the plant weakens and the fruit ripens prematurely.

Control is possible with triadimefon and propiconazole. It is also possible with hexaconazole, myclobutanil, and penconazole.

Standard fungicides are an effective way to manage powdery mildew disease on plants. Spray programs of conventional fungicides are advised to begin when powdery mildew symptoms and signs are first noticed. Conventional fungicides should be applied on a regular basis for best results against the disease.

Powdery mildew

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

Leaf spots will begin as very small, yellow, brown or black spots that enlarge in size. The spot usually turns gray with a black outline. Lesions on the petiole and rachis are similar. Symptoms may occur on multiple leaves at once, especially on juvenile palms.

Fungicides are used to prevent further spread of the disease by protecting leaf tissue that has not been infected by the fungal pathogen. In the nursery situation, prune severely diseased leaves prior to fungicide application.

In rare cases of severe infection and where the size and value of plants make it practicable, applications of fungicides may be helpful.

Pestalotiopsis leaf spot

General symptoms can include one or more of the following symptoms: curling or cupped leaves, stunted growth, discolored leaves, or leaves with dead spots. The same herbicide may cause different symptoms on different plant species. Since herbicides do not leave a "calling card" like mites, insects, and diseases (but the damage they cause can be mistaken for herbicide damage), it is advised to rule these out first. Other disorders that produce symptoms that can resemble herbicide damage include virus diseases, adverse weather, salt damage, drought, soil compaction, misapplied fertilizers, root stress, and nutrient deficiencies. Excluding these as causes requires close examination of the site and attention to patterns. Is the pattern of damaged plants consistent with drifting spray? Is more than just one kind of plant affected? Did the symptoms appear within one or two days (in most cases) of the suspected application of an herbicide? Were any lawn weed control products used in the area, including weed and feed products containing an herbicide? The answer to these and other questions can help make a circumstantial case of herbicide damage.

Cutgrass

(Leersia oryzoides)

What is the plant

Planting

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists