There are many symptoms of aphid damage, including decreased growth rates, mottled leaves, yellowing, stunted growth, curled leaves, browning, wilting, low yields and, eventually, death. Along with the loss of plant juices from direct feeding, aphids can spread diseases.

Signs of damage

1. Monitor your plants. Beginning early in the season, check your plants frequently for the presence of aphids, paying close attention to plants you've found aphids on before. 
2. Check for ants. 
3. Plant onions. 
4. Don't over fertilize your plants.

How to prevent

Despite the fact that herbal infusions and decoctions are not chemicals, it should not be overlooked that they: in high concentration can cause burns in plants; can be dangerous not only for aphids, but also for other insects; at least some of them are poisonous to humans. Therefore, it is necessary to use such drugs wisely, observing safety measures, recipes and rules for use. Before the first use, any solutions must first be checked in a limited area, and only then, having made sure of the effectiveness of the product, apply throughout the entire area. Fruit crops can be processed with decoctions and infusions during the budding period, immediately after flowering and no later than 14-40 days before harvesting. It is recommended to process berry crops with infusions before flowering and after the berries are harvested. Vegetable crops can be sprayed with herbal infusions for the last time no later than a month before the fruit is removed.

Treat

main

description

description_sm

description_sm_2

Sternorrhyncha

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

Fungus gnat damage will appear similar to that of any other root-related issue, such as root rot. Lower leaves may turn yellow and drop, and the plant’s growth may slow down or stop completely. In particularly bad cases, wilting of the entire plant could occur, followed by the death of the plant if roots are extremely damaged. 
In small numbers, fungus gnats are more of an annoyance than anything. In fact, the adult gnats don’t actively harm plants nor people. If their population gets out of hand, however, the larvae may start feeding on plant roots, causing notable damage. This is especially bad for young plants, such as seedlings, which have only a few delicate roots. Fungus gnats are also capable of spreading the plant pathogen that causes damping off and the eventual death of seedlings.

1. Keep soil dry: Fungus gnats seek out moist soil, so allowing your houseplants to dry out a bit between waterings can slow down or stop an infestation. Let the top inch or two of soil dry out before watering again, and try to go as long as possible between waterings. Gnats may be deterred from laying their eggs if the soil is dry on the surface.
2. Mosquito dunks (with beneficial bacteria): Mosquito dunks are used to keep mosquito larvae from populating fountains, animal troughs, fish ponds, and other small bodies of water. The product consists of a dry pellet containing a type of bacteria called Bacillus thuringiensis subspecies isrealensis. This beneficial bacteria infects and kills the larvae of flying insects, including mosquitoes, fruit flies, and fungus gnats.
To use mosquito dunks: Fill up a gallon jug (or watering can) with clean water and toss in a mosquito dunk. It’s a good idea to break up the dunk a bit before placing it in the water, or you can wait for it to soften before breaking it apart. Let the dunk soak in the water for as long as possible (at least overnight), then remove it from the water (the dunk can be reused) and use this water for fungus gnat–infested plants. The bacteria will have leeched into the water and will now infect and kill any larvae that come into contact with it in the soil. Repeat this process every time you water your plants for at least a few months.
3. Cover drainage holes: Though gnats typically remain near the tops of pots, they may find their way to the drainage holes on the underside of a pot and start laying eggs there, too. If this happens, cover the drainage holes with a piece of synthetic fabric to prevent the gnats from getting in or out of the hole, but to also let water pass through freely. Attach with tape or rubber bands.

Getting rid of fungus gnats is all about consistency. Catching the adults is fairly easy, but because the adult population comes in cycles, you need to make sure that your traps are refreshed regularly. For the best results, use a combination of the traps :
1. Sticky cards traps: These traps consist of a yellow note card covered in a sticky adhesive. They are most effective when cut into small squares and placed directly on top of the soil or attached to skewers just above the soil. Adult gnats will fly or crawl onto the card and become trapped. Fungus gnats are attracted to the color yellow, so use the yellow sticky cards rather than the blue ones. 
2. Cider-vinegar traps: Simple and effective, cider-vinegar traps consist of a shallow container with a small amount of apple cider vinegar, water, and liquid dish soap.
To make a cider-vinegar trap: Find a shallow container—a tuna can is perfect—and fill it with equal parts water and apple cider vinegar. (The liquid should be at least ¼-inch deep.) Put a few drops of liquid dish soap into the mixture and stir gently. Place the trap near the base of the affected plant or, ideally, inside the pot on top of the soil. Check it every few days to refresh with new vinegar and water.
3.Flypaper: Flypaper ribbons, such as those hung in horse barns to catch outdoor flies, can also be used to catch fungus gnats. However, these traps are usually overkill for gnats and can easily get stuck to things you don’t want them to stick to, such as furniture, hair, plants, and so on.

Fungus Gnats

Usually the first sign of thrip damage is faded or dirty looking leaves. The leaves will start by turning white or grayish in color, then eventually brown as the damaged areas start to die.
Though it’s possible for thrips to kill a houseplant, it’s rare. Mature, healthy houseplants can handle a pretty heavy infestation. The biggest threat is to small or weak houseplants.
However, not only is a thrip infestation gross, they make your indoor plants look terrible, and heavy damage can stunt their growth. Other common symptoms include:
- Brown stripes on the leaves
- Faded, splotchy, pale-colored leaves
- Parts of the leaves are dying
- Flower buds are malformed, dropping, or won’t open
- Leaves start dropping unexpectedly
- New growth is deformed

Thrips can be difficult to get rid of. So, once you finally win the battle, you want to prevent them from ever coming back!
The good news is that there are a few easy ways to prevent thrips from infesting your houseplants…
- Monitor them on a regular basis for the first signs of an infestation
- Debug all of your plants before bringing them back inside for the winter
- Keep anything that you bring in from your garden (cut flowers, veggies…etc) far away from your houseplants
- Inspect all new houseplants before bringing them home, then quarantine them for a few weeks afterward

The first thing you should do as soon as you spot thrips on a houseplant is to quarantine the infested plant immediately. Then check all of the surrounding houseplants for signs of thrips, and isolate any others you may find.Make sure that you begin treating the infestation right away. Also, to help prevent thrips from spreading, always wash your hands after handling an infested houseplant.
RINSE THE LEAVES
If you can, take your houseplant outside, and rinse the leaves with the hose. That will remove many of the bugs, and quickly knock down their population.You could rinse the leaves in the sink or shower instead, and that will work too. Be sure to use tepid water, and take care not to overwater your houseplant in the process.
INSECTICIDAL SOAP
Soap kills thrips on contact, and will help to give you the upper hand. You can use a pre-mixed organic insecticidal soap, or make your own using 1 tsp mild liquid soap to 1 liter of water.Be sure to spray it directly on the infested leaves to kill the bugs. Insecticidal soap doesn’t have any kind of residual effect, so it’s important to treat them often in order to completely get rid of thrips.
WASH YOUR HOUSEPLANT
You could also try washing the leaves with diluted mild liquid soap, and rinse it off with water. This will kill thrips as well, and help to quickly get the population under control.Make sure you wash the undersides of leaves too, that’s where thrips like to hide. But before washing all of the leaves, it’s best to test the soap on a few first, to make sure it doesn’t damage your houseplant.
NEEM OIL 
It’s a naturally occurring insecticide, and also has a residual effect that will help to deter future infestations.Spray a neem oil solution directly on the leaves and stems. This will kill some of the bugs on contact, and others will die when they feed on the neem oil covered leaves. Either a pre-mixed horticultural oil or a hot pepper wax spray can also be very effective to get rid of thrips on houseplants.
STICKY TRAPS 
Since adult thrips are able to fly, sticky traps can work very well to capture them. Place either yellow or blue sticky traps near the infested houseplant to attract them.

Houseplant Thrips

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

Ascomycetes are characterized by septate hyphae with simple pores. Asexual reproduction by conidia. Sexual reproduction by ascospores, typically eight, in an ascus. Asci are often housed in a fruiting body or ascocarp e.g. cleistothecia or perithecia.

Good gardening habits and effective treatment help prevent, stop and control fungal disease: 

1. Start by planting healthy stock. ...
2. Choose planting sites based on plant needs. ...
3. Avoid overhead watering. ...
4. Water early in the day. ...
5. Don't crowd plants. ...
6. Don't work a wet garden. ...
7. Treat with a trusted, proven fungicide.

To control fungal outbreaks, as with bacteria, remove all infected plant parts, or plants. You may also choose to apply a fungicide. There are many products available for treatment, organically (copper, sulfur, and baking soda are common) or synthetically.

Ascomycetes

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

As is common among rusts, the life cycle of Cronartium ribicola includes two host species and goes through five spore stages. This life cycle is termed heteroecious. In the specific case of Cronartium ribicola, the aecial host of this pathogen is the white pine (Pinus subgenus Strobus, family Pinaceae) and the telial hosts are those of the genus Ribes, specifically currants and gooseberries. Species of both telial and aecial hosts have varying levels of resistance or immunity to infection. On the aecial host, the first signs of C. ribicola are yellow or red spots on the Pinus needles, but these are small and can be difficult to see; more visible symptoms on the aecial host includes perennial cankers which appear on the branches within two years of infection. Looking at the infected plant as a whole, the Pinus will appear chlorotic, and stunted with dead branches or tops that turn a bright red color. On the other hand, the telial host, Ribes, can contract yellowish chlorotic leaf spots, but is otherwise not significantly impacted. The signs of C. ribicola on Ribes, come in the form of the pathogen itself as orange pustules on the underside of the leaf.

Examine white pines each year for blister rust flags and cankers. Prune off branches with cankers at a branch union or where the branch meets the trunk.  Infected branches don't require any special kind of disposal because the pathogen cannot survive in dead wood.

Pruning white pine blister rust is the treatment of choice for localized infections, but take care not to spread the spores when you're cutting out diseased tissue. Dispose of any pruned materials immediately in a fire or by double bagging in plastic.

White pine blister rust

Wilted, downward-hanging foliage is often the first obvious symptom of Armillaria root rot. Other symptoms include foliage yellowing, leaf drop, and dieback of upper limbs. During the rainy fall and winter, groups of short-lived mushrooms often grow around the base of Armillaria-infected trees.

Cultural practices can also be effective for preventing the spread of Armillaria. High temperatures interfere with the progression of this disease; if soil temperatures reach 79 °F (26 °C), then the growth of Armillaria in the soil will be limited. Using collar excavation to expose primary roots directly below the crown to the continuous cycle of solar heating and air may reduce the colonization from Armillaria in trees that are already infected. This is called root collar excavation (RCE), and while it has been applied to citrus orchards and grapevines, this method has high labor costs and involvement due to the difficulty of carefully exposing these primary roots.

Sadly, there is no absolute treatment for Armillaria root rot. The disease can be managed by the consistent removal of dead trees and infected stumps. Armillaria requires consistent moisture to survive, and in citrus groves, excavation around the root crown has been an effective deterrent but not an ultimate cure.

Armillaria root rot

The earliest symptoms of rose rosette disease include a red pigmentation of the underside of leaf veins followed by sharply increased growth of vegetative shoots, which are typically more succulent than normal and colored in various shades of red. Leaves often become deformed, crinkled, and brittle with yellow mosaics and red pigmentation. As the disease progresses, leaves become very small, petioles are shortened, and most lateral buds grow, producing short, intensely red shoots. The disease causes the plant to be exceptionally susceptible to freeze damage. Symptoms on cultivated roses are typically less severe than on multiflora rose. Cultivated roses show symptoms of thickened, succulent stems and a proliferation of thorns. Symptoms can mimic some forms of herbicide damage.

Prune your roses in late winter or early spring. Do not use leaf blowers around your roses. Protect roses from prevailing winds with walls or other plants. Give your roses plenty of space. Control multiflora rose in your area.

1. Remove ornamental roses with symptoms. The entire plant including the roots should be removed and destroyed by burning or placing in a plastic bag. Care must be taken when working with diseased plants as you can facilitate spread of the mites that spreads the disease. Bag the plant before removal, cut it at ground level and then dig out the plant’s roots. Soil need not be removed. Clean tools and put on fresh clothing before moving to a disease-free plant or area. 2. Plant ornamental roses as far away as possible from known stands of multiflora rose. The general recommendation is maintain at least 300 feet between your roses and any stands of multiflora rose. Even greater distance is preferred especially if they are upwind of your desirable rose plants. 3. Control the disease by controlling the mite. Start mite control early by pruning your roses hard in late winter (back by 2/3) to remove as many overwintering mites as possible and then spray with horticultural oil to kill any remaining mites. Organic pesticides such as horticultural oils and insecticidal soap are recommended over other pesticides as these organic pesticides are less harmful to natural predators that feed on the problem mites. Apply weekly  during the months of June and July paying particular attention to the new growing tips where the mites will congregate. Refrain from using leaf blowers around roses as they can spread mites. 4. Help to isolate your roses. Do not plant roses too close together. With extra space between the plants mite movement can be reduced. Also, consider interplanting roses with other ornamental plants. 5. Using rose rosette disease as an IPM strategy. The multiflora rose is an exotic invasive species that is responsible for the degradation of millions of acres of farmland and recreational areas. Using the disease to control this invasive weed can cut costs and be considered environmentally friendly for reducing the amount of synthetic chemicals used. However, the disease also affects cultivated roses. One should be extremely cautious and good neighbor-minded when it comes to rose rosette disease.

Rose rosette disease

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Remove any sources of food, water or shelter. Store items in safe and enclosed containers. Dispose of garbage regularly with a tightly closed lid. Reduce clutter or areas where pests can hide. Seal and close off any cracks or holes to eliminate outside entry.

Wash plants with a strong spray of water to dislodge aphids, or remove and destroy affected plant parts. Organic solutions include spraying with horticultural oil (petroleum- or vegetable-based oil used to smother insects), insecticidal soap or neem (insecticide made from a tropical tree by the same name).

Insecta

Symptoms first appear as a slight yellowing of foliage and wilting of upper leaves. As wilting progresses, leaves may turn dull-green to brown and remain attached to the plant. When the stem and roots are cut diagonally, reddish-brown streaks are visible in the vascular tissues.
Signs and symptoms:
- Initially, plants wilt during the hottest part of the day and recover at night.
- Leaflets turn yellow on one side of the plant, or even just leaflets on one half of a compound leaf.
- The entire plant soon turns yellow and wilts. Browning of leaves occurs rarely.
- Peel the epidermis off the lower stem to see dark red and brown discolored vascular tissue.

Fusarium is most prevalent in warm soils. It is harbored in old plant debris and soil. The best way to prevent infection in your crops or plants is rotation and sterilization. 
Never plant the same crop in the same place annually. 
Pots should be sterilized with a bleach solution and new soil used when reusing them. You can also solarize beds, by spreading black plastic over an area in full sun for a month to kill the fungus. This causes extreme high temperatures that will “cook” the fungus and provide good control of Fusarium. 
Wash off tillage equipment, shoes and other tools that might have encountered infected soil. Remove all old plant debris annually and if you think it might be contaminated, burn it. Do not compost contaminated material as this provides an ideal incubation condition for propagating the fungus.

1 Plant resistant varieties when available.
2 Remove stricken growth from the garden and sterilize pruning clippers (one part bleach to 4 parts water) between cuts.
3 Use fumigants to control many garden insects, like cucumber beetles, which are known to spread the disease.
4 High nitrogen fertilizers may increase susceptibility to the disease. Test your soil and use a slow-release, organic fertilizer in the vegetable garden.
5 Hand pull or spot treat weeds using a weed flamer or natural herbicide — many weed species host the disease pathogen.
6 Mycostop is a biological fungicide that will safely protect crops against wilt caused by Fusarium. Approved for use in organic crop production, it can be applied as a soil spray or drench (1-2 gm/ 100 sq ft) to seedlings, ornamentals and vegetables. Apply sufficient water during application to move Mycostop into the root zone.
7 If the disease persists, it is best to remove the entire plant and solarize the soil before planting again.
To solarize the soil, you must leave a clear plastic tarp on the soil surface for 4-6 weeks during the hottest part of the year. Soil solarization will reduce or eliminate many soil inhabiting pests including nematodes, fungi, insects, weeds and weed seeds.

Fusarium Wilt

Rust diseases come in different varieties and can affect a wide range of plants. People often struggle with rust on their roses. It is easy to remember the defining characteristics of this fungus, as they match its name. Rust plant disease will look similar to the rust that appears on that old bicycle in the shed.
- Look for yellow or white spots forming on the upper leaves of a plant.
- Look for reddish to orange blister-like swellings called pustules on the undersides of leaves.
- Orange or yellow spots or streaks appear on the undersides of the leaves.
- Within these spots that form are spores.
- Usually leaf distortion and defoliation occur.

- Dust your plants with sulfur early in the season to prevent infection or to keep mild infections from spreading.
- Space your plants properly to encourage good air circulation.
- Avoid wetting the leaves when watering plants.
- There are many effective rust fungicides you can try.

1 Select rust-resistant plant varieties when available.
2 Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris.
3 Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day. Drip irrigation and soaker hoses can be used to help keep leaves dry.
4 Use a slow-release, organic fertilizer on crops and avoid excess nitrogen. Soft, leafy, new growth is most susceptible.
5 Apply copper sprays or sulfur powders to prevent infection of susceptible plants. For best results, apply early or at first sign of disease. Spray all plant parts thoroughly and repeat every 7-10 days up to the day of harvest.
6 Effectively treat fungal diseases with SERENADE Garden. This broad spectrum bio-fungicide uses a patented strain of Bacillus subtilis and is approved for organic gardening. Best of all, it’s safe to use — you can treat and pick crops the same day!
7 Containing sulfur and pyrethrins, Bonide® Orchard Spray is a safe, one-hit concentrate for insect attacks and fungal problems. For best results, apply as a protective spray (2.5 oz/ gallon) early in the season. If disease, insects or wet weather are present, mix 5 oz in one gallon of water. Thoroughly spray all parts of the plant, especially new shoots.
8 Prune or stake plants and remove weeds to improve air circulation. Make sure to disinfect your pruning tools (one part bleach to 4 parts water) after each cut.
9 Use a thick layer of mulch or organic compost to cover the soil after you have raked and cleaned it well. Mulch will prevent the disease spores from splashing back up onto the leaves. Burn or bag infected plants after the growing season . Do NOT compost.

Leaf Rust

Common, Persian, Chinese, and Japanese lilac leaves develop round to irregularly shaped brown spots with yellow halos. These spots enlarge and blight entire leaves. Succulent twigs are girdled, killed, and turn black.

1. Exclusion or eradication of the pathogen (quarantine and use of pathogen-tested seeds and propagated materials)
2. Use of clean transplants.
3. Monitor crops regularly and use predictive models.
4. Reduce the pathogen levels by crop rotation.
5. Remove weeds and incorporate crop residues that can host the disease.

The most common strategy for controlling diseases caused by Pseudomonas syringae is, as it has been for more than 5 decades, to spray bactericides. These mainly include a variety of copper compounds or other heavy metals, with or without various combinations of fungicides or other pest-control chemicals.

Pseudomonas

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

The spots on cucurbit leaves produced by the Phoma blight are usually more irregular in shape and most often are on the margin of the leaves. The spots are light brown on cantaloupe and cucumber and dark brown on watermelon. Fewer lesions are produced on stems but symptoms also tend to spread from the crown of the plant, giving the plant a blighted appearance. Fruit are generally not affected.

Crop rotations with nonhost plants such as small grain, corn, of two or more years are effective in reducing the incidence if disease-free seed are used. Currently no varieties are resistant.

A fungicide such as benomyl (Benlate), chlorothalonil (Bravo), copper, maneb (Manzate D or Dithane M-22 Special), mancozeb (Dithane M-45 or Manzate 200) or Dikar (Polyram) may be used to control the disease in the field. It is important to start the spray schedule as soon as the plants emerge and spray at 7-10 day intervals, covering all plant surfaces. High pressure (400 psi), high volume (100 gal/acre for a mature crop) spray equipment provides most effective coverage.

Phoma blights

Springtails occasionally feed on plant roots, but the damage is minimal. Problems arise when these pests congregate in moist areas and multiply. Thousands of springtails blanket walls, foundations and patios as their numbers grow. If not stopped outdoors, springtails multiply indoors in damp basements, kitchens and bathrooms — anywhere with sufficient moisture.

It is not difficult to keep this insect at bay. First of all ensure that house plants are always grown in sterile potting compost (this will also help keep away the diseases that the soil can contain).
If there is insufficient drainage, the compost can become waterlogged, so, next, always ‘crock’ a pot with a layer of grit or clay pellets before adding compost. If the compost to be used is too compact, coarse sand or perlite can be added to make it more free-draining.
If you find it difficult to assess when to water use a moisture meter, a self-watering cone or a container with a reservoir. In the latter cases, the compost takes up water gradually as it dries out, ensuring an even supply.

1 First of all, stop watering the plant and allow it almost to dry Out before re-watering. ‘This may be enough to eradicate these pests. It not, then you will need to use a chemical.
2 Use a suitable chemical, in granule form or diluted with water, to soak the potting mixture.
3 Insecticides containing diazmon, lindanc, malathion, pyrethrum or resmethrin are suitable. Make sure that due ingredients of an insecticide are listed on its label. One application of the chemical should be enough but repeat the application after 8 days to ensure eradicating ideal conditions for springtails.
4 If your plants are infested with Springtails, you will know as soon as you water them, as these tiny insects will start jumping about on top of the potting mixture.
5 Springtails will thrive in waterlogged soil so always water very carefully and ensure that the plant has good drainage.

Springtails

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

The signs of damage vary, typically depending on the way that the insect feeds on the plant. Damage from insects with chewing mouthparts typically appears on leaves or stems as ragged edges, holes, or other missing tissue. Insects that often cause chewing damage include caterpillars and Eastern lubber grasshoppers.

Preventing the transmission of viruses can be the chief reason to control certain insects. An example is the importance of controlling western flower thrips when growing impatiens. Their transmission of tomato spotted wilt virus can devastate a crop being started in a greenhouse.

The most common way of damaging the crops is through direct injury, caused by feeding on above-ground and below-ground plant parts. This type of direct crop injury is related to the insect's mouthparts. For example, insects with chewing mouthparts, such as beetles, damage the crop by chewing the leaves or some other plant parts. Moreover, some of them cause damage by boring into the plant tissue, such as stem boring insects or leaf miners.

Feeding damage by insects

Typical symptoms of potassium deficiency in plants include brown scorching and curling of leaf tips as well as chlorosis (yellowing) between leaf veins. Purple spots may also appear on the leaf undersides. Plant growth, root development, and seed and fruit development are usually reduced in potassium-deficient plants. Often, potassium deficiency symptoms first appear on older (lower) leaves because potassium is a mobile nutrient, meaning that a plant can allocate potassium to younger leaves when it is K deficient. Deficient plants may be more prone to frost damage and disease, and their symptoms can often be confused with wind scorch or drought. The deficiency is most common in several important fruit and vegetable crops; notably potatoes, brassicas, tomatoes, apples, currants, gooseberries, and raspberries. Sugar beets, cereals, and clover are also commonly affected.

The best way to prevent or solve this deficiency, is to add a potassium fertilizer to the plant. If necessary, it can be added to the nutritional feeding schedule if the shortage keeps occurring.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, vermiculite, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content but must be used cautiously due its effect on pH level. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Potassium deficiency

A range of lesions can occur including concentric oblong light oval-shaped rings (early sign), light green diamond-shaped areas, concentric green and tan oval-shaped rings, tan necrotic spots, and green islands within tan necrotic spots. Damage can reduce harvest yield and grade of onions.

Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants.

Monitor thrips populations with sticky traps starting in June. Damage is often first noticed at field edges, in areas of stressed plants, or in locations with thin plant stands. Infected plants may not show symptoms for several weeks. Sometimes symptoms may never appear. Reduced bulb size and quality of symptoms develop while bulbs are still growing. Control thrips. Control weeds and volunteer onion plants. Remove and destroy infected plants. Rotate crops.

Iris yellow spot virus

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

Symptoms of Cercospora leaf spot first appear as individual, circular spots that are tan to light brown with reddish purple borders. As the disease progresses, individual spots coalesce. Heavily infected leaves first become yellow and eventually turn brown and necrotic.

Avoid overwatering or watering in the late evening to reduce free moisture. Avoid overhead watering where the water can dislodge and disperse spores to uninfected plants. Space plants to encourage air movement and reduce high humidity levels.

For the most part, treating Cercospora leaf spot means preventing the fungi from infecting your plants in the first place.

Cercospora leaf spot

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Symptoms of bacterial infection in plants are much like the symptoms in fungal plant disease. They include leaf spots, blights, wilts, scabs, cankers and soft rots of roots, storage organs and fruit, and overgrowth. Bacterial spots: the most common symptom of bacterial disease is leaf spots.

The best way to prevent fungi from attacking your plants is to buy disease resistant varieties whenever possible. Other ways include minimizing the amount of water contacting foliage. Water at the soil level and early in the day. This allows foliage to dry out quickly, should it become wet.

Antibiotics: streptomycin and/or oxytetracycline may also help kill or suppress plant pathogenic bacteria prior to infection and reduce spread of the disease, but they will not cure plants that are already diseased. Antibiotics are also used to treat diseases caused by fastidious vascular bacteria.

Bacteria

Wilting, stunting, uneven plant growth, crown rot, plant death. Roots are discolored, the cortex may slough off, leaving the vascular cylinder.

Fertilize carefully with a slow-release formula in summer months. Water long and sparingly (no more than once a week), early in the day. This way, grass blades have a chance to dry out before nightfall. Aerate the soil to prevent thatch buildup and to loosen compacted, poorly draining soil.

For warm-season Pythium diseases, time fungicide applications preventively or at the very first onset of disease symptoms.

Pythium diseases

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

Yellowing between the leaf veins, sometimes with reddish brown tints and early leaf fall. Magnesium deficiency is common in tomatoes, apples, grape vines, raspberries, roses and rhododendrons.

Reducing or avoiding calcium-rich foods two hours before or after eating magnesium-rich foods. avoiding high-dose zinc supplements. treating vitamin D deficiency. eating raw vegetables instead of cooking them. quitting smoking.

Epsom salts dissolved in water and sprayed onto foliage and applied around the roots will cure magnesium deficiency. In future, feed plants in spring with balanced plant food that contains magnesium. For rhododendrons and azaleas, feed with a plant food specifically formulated for lime-hating or ericaceous plants.

Magnesium deficiency

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Plant stunting and severe curling of leaves occur when the leafhopper Empoasca fabae punctures the undersurfaces of leaves and veins of bush beans and inhibits growth. This leafhopper also feeds on alfalfa and causes leaves to turn yellow and drop off.

Try to avoid moisture or humidity relationships as they affect the habitats of homopterans.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Homoptera

Symptoms of infection include a downward curling of the leaves, leaf tip dieback, stunting, necrosis of growing leaf tips, sunken ‘chicken pox-like’ spots on leaves (often with a surrounding halo), stem death and yellowing. Since these symptoms are so generic, extreme caution must be taken when introducing new plants to your greenhouse. Infected plants can not be cured and not all hosts display visible symptoms.

Impatiens necrotic spot control focuses on excluding INSV and preventing its spread. Inspect any plants entering a greenhouse (e.g., new plant shipments, plants moved in from outdoors) for viral symptoms and thrips. Isolate new plants until they are determined to be thrips- and virus-free.

Once you suspect impatiens necrotic spot, treatment won't help – you must destroy the plant immediately. If many plants are infected, it's a good idea to contact your university extension office for testing to confirm the virus is present.

Impatiens necrotic spot virus

Leaf spots start as small brown spots, often with a yellow halo, and grow into irregular brown spots (up to 3/4"). Leaf spots sometimes develop a target-like pattern of rings. Severely infected leaves turn brown, curl upward, wither and die.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging.

Alternaria blight

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

Yellowing (Chlorosis) occur in the newly emerging leaves instead of the older leaves and usually seen in the interveinal region Fruit would be of poor quality and quantity. Chlorosis occurs in younger leaves because iron is not a mobile element, and as such, the younger leaves cannot draw iron from other areas of the plant. Over time, the yellowing may even turn a pale white or the whole leaf may be affected. Iron deficient plants may overaccumulate heavy metals such as cadmium. Any plant may be affected, but raspberries and pears are particularly susceptible, as well as most acid-loving plants such as azaleas and camellias.

Prevention is the best control. Do not plant chlorosis-susceptible trees in soils having a high pH or in soils low in organic matter. If practical, replace species that are susceptible. When the leaves of plants become chlorotic, always determine the primary cause through a soil test.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II) sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

Iron deficiency

If your plant is not getting enough light, the most common sign is the yellowing and dropping of leaves, stunted leaf growth, elongated stems, and a dull-green color. If your plant is getting too much light, then its leaves will have singed tips, burned patches, or will be falling off (yikes!).

You can prevent this from happening by turning the plant once a week or every time you water. This ensure all leaves are exposed to roughly the same amount of light. All plants will bend towards their light source, and we recommend turning all your houseplants at least once a week to prevent “one-sided” growth.

Most plants will survive illuminance ten times lower than listed below but will not grow as well or bloom. Most plants grown as houseplants are selected because they are already adapted to growing at typical house temperatures, between 15° and 25°C. Exceptions do occur, and some plants require chilling periods at lower temperatures (down to 5° or 10°) in winter when less light is available. Houseplants are generally grown in specialized soils called potting compost or potting soil, not in local natural soil. A good potting compost mixture includes soil conditioners to provide the plant with nutrients, support, adequate drainage, and proper aeration. Most potting composts contain a combination of peat and vermiculite or perlite. Concern over environmental damage to peat bogs, however, is leading to the replacement of peat by coir (coconut fibre), which is a sustainable resource. Sterilised soil can also be used.

Lack of light

Rust symptoms first appear on the upper and/or lower surfaces of leaves as small yellow or white slightly raised spots.

Remove all infected parts and destroy them. For bramble fruits, remove and destroy all the infected plants and replant the area with resistant varieties. Clean away all debris in between plants to prevent rust from spreading. Avoid splashing water onto the leaves, as this can help spread rust.

Use a mild bleach solution, and rinse and dry them thoroughly before putting them away. Rake up and remove fallen or dead leaves and other plant debris. Some gardeners compost vegetation that show signs of rust, expecting the compost pile to heat up enough to kill the spores.

Rust

Botryosphaeria obtusa enters the fruit through wounds. These can be made by insects, birds or growth cracks. At first a brown spot, near the calyx, appears on the fruit. The spot on the fruit then enlarges and black/brown rings appear on the fruit. The fruit holds its shape, however, unlike other fruit diseases. The fruit will then wither up and can remain on the tree for another year before falling off. During this time pycnidia appear on the surface of the rotted fruit.

Start with clean seed. In warm, humid weather, a single infected seed in as many as 10,000 could lead to a black rot outbreak.

The most effective treatment is to prune out the infected areas on trees, to ensure transfer between trees does not occur. Fruit that is infected can stay on the tree for over a year, and therefore remaining fruit should be removed to avoid another source of inoculation for other trees. The trimmed branches or dead fruit should then be burned or disposed of immediately as the organism can survive on the dead tissue for a long period of time. Infection of leaves and fruit can be avoided by spraying them with a fungicide. The treatment for the fungicide should be also kept up to date via the manufacturer's instructions.

Black rot

Stems will be leggy or stretched out. Leaves turn yellow. Leaves are too small.

Arrange the light sources so that the plant receives the required number of photons.

Make sure your plant gets not too much/not too little light.

Light-related issue

Galls are most commonly found near ground level on the roots and lower branches of the plants. As the galls enlarge, they become woody and hard. The outer layer turns brown and corky. The plant may be weakened and stunted with some branch or tip dieback. Symptoms may not develop immediately after infection. Galls grow most rapidly during the warm months of the year.

Limit wounding of plant material. Avoid planting too deep. Avoid mounding soil up on newly planted trees. Keep crown of tree as dry as possible; Agrobacterium is favored by wet environments.

1. Prune out infected material. Crown gall cannot be eliminated from a shrub even though the infected plant may live for many years. To improve the appearance of the plant, prune out and destroy infected stems below the galled area. Sterilize the pruning shears after each cut with a mixture of one part bleach to nine parts water. 2. Destroy infected plants. Destroy the infected plant. The bacterium will remain in the soil so it is important to plant a resistant plant species. If the same species needs to be planted in the area, remove and replace the soil or consider soil sterilization. 3. Sterilize the soil. Soils known to be infected with crown gall bacteria can be sterilized using chemicals, heat, or antibiotics. This is not practical for most home gardeners. A biological control has been introduced using a bacterium, Agrobacterium radiobactor strain 84. This bacterium was discovered to be antagonistic to crown gall bacterium. It is available for use as a preplant treatment by dipping nursery stock in a suspension of the live bacteria in water. 4. Exclude the problem. When purchasing forsythia and euonymus plants, inspect them carefully for signs of galls. Do not purchase plants that show gall-forming symptoms. 5. Replant with a more resistant plant species. The following plants recommended by the University of Illinois show greater resistance to bacterial crown gall: barberry, hornbeam, true cedars, ginkgo, golden raintree, tulip tree, mahonia, spruce, linden, boxwood, catalpa, beech, holly, larch, magnolia, black gum, pine, Douglas fir, bald cypress, hemlock, birch, firethorn, redbud, smoke tree, sweet gum, deutzia, serviceberry, yellowwood, yew, and zelkova.

Crown gall

Alternaria symptoms once infection begins include small, dark, circular spots that regularly reach ½ inch (1 cm.) in diameter.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging. Conventional gardeners can use chlorothanil, fludioxinil, imazalil, iprodine, maneb, mancozeb, or thiram on plants listed on the label of their chemical of choice, but should still strive for prevention in areas with known Alternaria pathogens.

Alternaria

Death can occur with a sudden browning of the leaves, as with the red oaks, or over time with gradual leaf loss. P. ramorum infection in twigs can lead to shoot tip dieback and wilting. Shoot tip wilting, or flagging, can be useful in identifying trees that are infected but not showing bleeding symptoms.

Truly, the best defenses against Sudden Oak Death include avoiding moving the host plant material long distances, knowing exactly where the disease is, and avoiding traveling in infected areas.

There is no treatment for sudden oak death. A fungicide can be used to allay some of the symptoms but it cannot be cured. Preventative actions are the most successful, by creating barriers between infected and non-infected areas and removing infected plants after they've been diagnosed.

Sudden oak death

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

Thysanoptera

Raised yellowish-orange, powdery pustules on the surface of infected foliage. Significant foliar dieback occurs on especially susceptible cultivars.

As with other fungus, daylily rust thrives in moisture. Use soaker hoses rather than overhead watering systems and water in the morning rather than late in the day or at night. This will cut down on the amount of time that the leaves remain wet.

Do not move or transport infected plant material. Carefully inspect incoming plant material for signs of rust. Fungicide applications are needed for disease management, especially on susceptible cultivars. Contact your local extension office for information on ratings of cultivar susceptibility and current fungicide control recommendations.

Daylily rust

A diagnostic feature of this disease is the presence of many dark-brown, pimple-like structures called pycnidia (fruiting bodies of the fungus) that are readily visible in the tan centers of the spots. When spots are numerous, affected leaves turn yellow and eventually shrivel up, brown, and drop off.

Use disease-free seed. There's no evidence that this fungus is carried by seeds, but err on the safe side and don't save seed from infected plants. Thoroughly processing the tomato seeds you are saving will also help rid the seeds of lingering diseases.
Start with a clean garden. Dispose of all affected plants. The fungus can over-winter on the debris of diseased plants. It's important to dispose of all the affected plants far away from the garden and the compost pile. Keep in mind that it may have spread to your potatoes and eggplants, too.
Avoid overhead watering. Water aids the spread of Septoria leaf spot. Keep it off the leaves as much as possible by watering at the base of the plant only. Of course, it's impossible to keep the rain off your plants, but every little bit helps.
Provide room for air circulation. Leave some space between your tomato plants so there is good airflow. Stake them so that they are not touching the ground and not all bunched together. Good air circulation is especially important during damp and rainy periods.
Mulch below the plants. A layer of mulch will help prevent spores on the ground from splashing up onto the lower leaves.
Plant next year's tomatoes in a different section of your garden. In small gardens, it's not always practical to rotate your crops, so good clean up and sanitation become even more important.

Removing infected leaves. Remove infected leaves immediately, and be sure to wash your hands and pruners thoroughly before working with uninfected plants.
Consider organic fungicide options. Fungicides containing either copper or potassium bicarbonate will help prevent the spreading of the disease. Begin spraying as soon as the first symptoms appear and follow the label directions for continued management.
Consider chemical fungicides. While chemical options are not ideal, they may be the only option for controlling advanced infections. One of the least toxic and most effective is chlorothalonil (sold under the names Fungonil and Daconil).

Septoria leaf spot

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

When late blight infects stems, everything above the infection site dies. Infected tomato fruits develop rough, leathery spots or dark, water-soaked areas that rot rapidly. Potato tubers bear dark, irregular spots on the surface and reddish-brown spots that extend down into the flesh. Decay continues after harvest.

Fungicides for the control of potato blight are normally only used in a preventative manner, optionally in conjunction with disease forecasting. In susceptible varieties, sometimes fungicide applications may be needed weekly. An early spray is most effective. The choice of fungicide can depend on the nature of local strains of P. infestans. Metalaxyl is a fungicide that was marketed for use against P. infestans, but suffered serious resistance issues when used on its own. In some regions of the world during the 1980s and 1990s, most strains of P. infestans became resistant to metalaxyl, but in subsequent years many populations shifted back to sensitivity. To reduce the occurrence of resistance, it is strongly advised to use single-target fungicides such as metalaxyl along with carbamate compounds. A combination of other compounds are recommended for managing metalaxyl-resistant strains. These include mandipropamid, chlorothalonil, fluazinam, triphenyltin, mancozeb, and others. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against late blight.

Ridging is often used to reduce tuber contamination by blight. This normally involves piling soil or mulch around the stems of the potato blight meaning the pathogen has farther to travel to get to the tuber. Another approach is to destroy the canopy around five weeks before harvest, using a contact herbicide or sulfuric acid to burn off the foliage. Eliminating infected foliage reduces the likelihood of tuber infection.

Late blight

Tissues affected by the symptoms of Erwinia amylovora include blossoms, fruits, shoots, and branches of apple (Pomoideae), pear, and many other rosaceous plants. All symptoms are above ground and are typically easy to recognize. Symptoms on blossoms include water soaking of the floral receptacle, ovary, and peduncles. This results in a dull, gray-green appearance at 1–2 weeks after petal fall, and eventually tissues will shrivel and turn black. The base of the blossom and young fruit show similar symptoms as infection spreads. Opaque white- or amber-colored droplets of bacterial ooze can be seen on the infected tissue when the environment is high in humidity. Shoots show similar symptoms but develop much more rapidly. A “Shepherd's Crook” can be seen when the tip of the shoot wilts, and diseased shoot leaves typically have blackening along the mid-vein and then die. In number, diseased shoots give the tree a blighted appearance. Initial infection of blossoms and shoots can spread to larger tree limbs. Branches will darken and become water soaked. Advanced infection develops cracks in bark and a sunken surface. Wood under the bark will become streaked with black discoloration. Immature fruit forms water-soaked lesions and later turned black. Bacterial ooze can be found on these lesions. Severe infections result in fruit turning entirely black and shriveling.

Phytosanitary measures have been employed as the best sanitary measures against E. amylovora dispersal. High risk countries are encouraged not to import plants susceptible to the pathogen into their territory because, once the bacteria become established in an area it is nearly impossible to eradicate the disease. Nurseries and orchards in such regions are placed on strict phytosanitary surveillance measures and well-monitored. Imported and infected crops are destroyed as soon as they are noticed since the bacteria spreads very rapidly and eradication methods are usually costly and inefficient.

The only effective treatment for plants already infected is to prune off the affected branches and remove them from the area. Plants or trees should be inspected routinely for the appearance of new infections. The rest of the plant can be saved if the blighted wood is removed before the infection spreads to the roots. There is no known cure; prevention is the key.

Fire blight

Browning of leaf margins and/or yellowing or darkening of the areas between the main leaf veins are symptoms of leaf scorch. Due to environmental causes, leaves may dry, turn brown, and become brittle. Look for damage to trees and shrubs on the upper portion on the sunny, southern side and on the windy side. Premature dropping of leaves and twig dieback may occur during the late summer. Symptoms usually appear after drying winds in conjunction with periods of hot, dry weather. Leaf scorch on narrow leaf evergreens appears as brown or purple brown discoloration of the needle tips. If unfavorable conditions become more severe, browning of needles increases. This should not be confused with the browning and shedding of older interior needles. Scorch may result from hot, dry weather in summer or from strong, dry winter winds when the ground is frozen. Symptoms may not become apparent for a month or more after the initial injury. Winter leaf scorch in evergreen plants usually appears as two long, brown areas paralleling the main leaf vein.

1. Plant Thoughtfully. Even your plants that love to soak up the sun need some form of shade to protect them.
2. Use Sunblock. If you can't provide your plants the amount of shade they need, use another method to keep them insulated and keep moisture in the soil around them.
3. Create Shade.

1. Water when needed and maintain plant vigor. Plant in a fertile, well-drained soil at the same depth the plants grew in at the nursery and with an adequate supply of organic matter. Soil should be moist to a depth of 10 to 12 inches after a thorough watering. This should be done about once weekly. It is very important for the trees, especially broadleaf and needled evergreens, to be well watered going into the winter period. Water during this period if seasonal rains are not adequate or during the winter when the soil is not frozen. Annuals and perennials require more frequent watering than most trees and shrubs. 
2. Fertilize. Fertilize plants in early spring based on a soil test and the directions printed on the fertilizer container. Nitrogen should be applied annually based on the area to be fertilized, the type of plant, and the diameter of the trunk. Do not fertilize with nitrogen in the late fall as it may cause new soft growth easily damaged by cold weather. 
3. Mulch. Organic mulches (pine needles, wood chips, composted leaves, pine bark, cypress mulch) can help retain moisture during the summer and fall droughts. In the winter this mulch prevents the alternate freezing and thawing of the soil. Mulch will also cool the soil in summer. 
4. Screens. Screens may be used to protect trees and plants in areas exposed to wind and sun, but it is best not to plant tender plants in these exposures. 
5. Exposure. Other factors which can result in scorch are excessive fertilizer, deicing salt, herbicide, dog urine, trash fires, leaking sewer or gas mains, girdling roots or strangling wires, vehicle exhaust, and heat reflected from buildings. Elimination of the exposure to these elements is the only correction. 
6. Physical hazards. Avoid root injury when digging near trees and shrubs. Care should be taken to not injure the bark and roots when using lawnmowers, weed whips, and edging tools.

Holodiscus Discolor

(Holodiscus Discolor)

What is the plant

Planting

Sunlight

Pruning

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists