Symptoms begin as oval to elongate lesions that are generally reddish-brown in color. In the late stages of the disease, erumpent pustules produce numerous black sooty spores. Severe infestations with many stem lesions may weaken plant stems and result in lodging.

Signs of damage

Since the fungus overwinters on other plant material, clean up dead plants at the end of the season. Rotate your allium crops to areas that were not previously hosting plants in the family. Remove wild forms of allium, which can also host the fungal spores.

How to prevent

The rust species Puccinia obtegens has shown some promise for controlling Canada thistle, but it must be used in conjunction with other control measures to be effective.

Treat

main

description

description_sm

description_sm_2

Puccinia

General symptoms can include one or more of the following symptoms: curling or cupped leaves, stunted growth, discolored leaves, or leaves with dead spots. The same herbicide may cause different symptoms on different plant species. Since herbicides do not leave a "calling card" like mites, insects, and diseases (but the damage they cause can be mistaken for herbicide damage), it is advised to rule these out first. Other disorders that produce symptoms that can resemble herbicide damage include virus diseases, adverse weather, salt damage, drought, soil compaction, misapplied fertilizers, root stress, and nutrient deficiencies. Excluding these as causes requires close examination of the site and attention to patterns. Is the pattern of damaged plants consistent with drifting spray? Is more than just one kind of plant affected? Did the symptoms appear within one or two days (in most cases) of the suspected application of an herbicide? Were any lawn weed control products used in the area, including weed and feed products containing an herbicide? The answer to these and other questions can help make a circumstantial case of herbicide damage.

Use shielded booms to minimize herbicide off-target movement. Use spray additives within label guidelines to reduce production of small spray droplets. This will result in less potential for drift. Avoid tank mix ammonium sulfate with volatile herbicides as ammonium sulfate increases volatility.

Organic strategies that help plants recover from herbicide damage are those that aid in maintaining plant vigor:  water during dry periods; fertilize with organic fertilizer according to a soil test report; and watch for and control any insect or disease problems using organic approaches.

Herbicide damage

- Black or dark brown, superficial fungal growth on the aerial parts of plants, particularly the upper leaf surfaces
- The amount of growth can vary from a fine soot-like or powdery deposit, to a thick sheet of growth that may crack or peel away from the leaf surface during dry conditions
- The growth can sometimes be washed away, leaving a healthy-looking leaf surface beneath
- Sap-sucking pests such as aphids, scale insects, mealybugs or whiteflies can often be found on the plant, above the point where the sooty mould is growing
- In some cases these insects may occur on plants that overhang those affected with sooty mould
- Ants may also be seen in association with the sap-sucking pests
- Leaves, stems, fruit, etc. where the sooty moulds are growing are contaminated with sticky honeydew

It isn’t really possible to preventively treat against sooty mold, and when it appears it is immediately recognizable.
There are a few things to do that can reduce the likeliness that this disease would appear.
- Ensure your plant has sufficient nutrients and is well watered. A plant weakened by poor soil or lack of water is a vulnerable plant.
- Increase the diversity of plants and flowers in your garden, it is the best way to protect them naturally from their predators.

Sooty mold grows on the honeydew dropped by many sap-feeding insects (most commonly aphids, scale and whiteflies). The honeydew is a sugary liquid that the insects excrete as waste. Sooty mold in itself does not feed on plant tissues or cause damage, but it can block enough sunlight to affect photosynthesis which can weaken the plant over time. It is also very ugly and difficult remove (more on that in a bit).
The first step is to identify and treat the insect causing the problem:
- Soft or armored scale (look like small turtle shells affixed to the stems and/or leaves, sometimes very well-camouflaged in color or texture. Egg sacs are often wispy and white),
- Aphids (small green, yellow or tan insects with thin legs & antennae, wooly aphids look a bit like tiny sheep)
- Whitefly (tiny, white-winged flies).
A population of insects large enough to cause a sooty mold problem is usually pretty easy to spot and identify. Controlling the insects will stop the rain of sugar water that feeds the sooty mold.
The mold itself is difficult to remove, but you can hasten the rate at which it naturally weathers off. Spraying the leaves with insecticidal soap can help soften the sooty coating. Spray late in the day so the soap remains moist for as long as possible. If you can spray a few hours before a heavy rain is forecast the rain will be better able to remove the sooty mold.
If the plant has a rugged leaf, like holly or gardenia, you can follow the soap application with a strong jet of water from your garden hose after you’ve given the soap a little time to soften the mold. Be careful with softer-leafed plants and new growth, as a strong water stream can tear or bruise leaves. You’ll probably have to repeat the process a few times to wear the coating of sooty mold off over time.
If your insect eradication was successful, you’ll see that new growth on the sooty mold affected plants will remain fresh and clean. The mold does not spread without the honeydew to grow on, so new sooty mold indicates a continuing insect problem.

Sooty Mold

Symptoms of bacterial infection in plants are much like the symptoms in fungal plant disease. They include leaf spots, blights, wilts, scabs, cankers and soft rots of roots, storage organs and fruit, and overgrowth. Bacterial spots: the most common symptom of bacterial disease is leaf spots.

The best way to prevent fungi from attacking your plants is to buy disease resistant varieties whenever possible. Other ways include minimizing the amount of water contacting foliage. Water at the soil level and early in the day. This allows foliage to dry out quickly, should it become wet.

Antibiotics: streptomycin and/or oxytetracycline may also help kill or suppress plant pathogenic bacteria prior to infection and reduce spread of the disease, but they will not cure plants that are already diseased. Antibiotics are also used to treat diseases caused by fastidious vascular bacteria.

Bacteria

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves. Calcium deficiencies in plants are associated with reduced height, fewer nodes, and less leaf area.

Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk. Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Blossom end rot

Whiteflies tend to prefer to feed on new growth, so check around any newly unfurled leaves first.
Check the undersides of leaves—especially around the veins—for white insects, even if they aren’t immediately visible, and feel leaf surfaces for sticky honeydew. If the whiteflies are feeding, they’ll suddenly all fly off the leaves in a swarm, so it’s very obvious.
You may also find eggs laid on the undersides of leaves. This is the beginning of a new generation! When the eggs hatch, the larvae will look like teeny white ovals without legs; they don’t move but they immediately start sucking the plant juice. This is why gardeners often miss whiteflies until it’s too late. Adult females can produce up to 400 eggs, which hatch in about one week to a month after laying. They are usually laid in a circular pattern. Eggs are pale yellow when newly laid and brown when about to hatch.

1 Your first line of defense should be inspecting all plants for pests before you bring them home, as well as keeping any new additions away from the rest of your plants for a period of time. This will allow you to identify and curtail any pest or disease issues that appear.
2 Keeping natural predators around will prevent whiteflies from ever exploding in population. For this reason, avoid using insecticides. Ladybugs, spiders, green lacewing larvae, and dragonflies are a few of many beneficial insects that can control a whitefly population. Hummingbirds are another natural predator. Try creating a habitat that will attract dragonflies and damselflies (which also helpfully eat mosquitoes) or beautiful hummingbirds.
3 When it comes to whiteflies, avoid chemical insecticides; they’re usually resistant and all you end up doing is killing the beneficial insects—their natural predators—and the insects that pollinate the garden for a better harvest!
4 Mulch early in the season with aluminum reflective mulch, especially around tomatoes and peppers. The reflective mulch makes it challenging for whiteflies to find their preferred host plants. 
5 Set out yellow index cards coated with petroleum jelly to monitor whiteflies, especially when it comes to tomatoes, peppers, sweet potatoes, or cabbage crops. A half-and-half mixture of petroleum jelly and dish soap, spread over small boards painted bright yellow, is sticky enough to catch little whiteflies, too. To whiteflies, the color yellow looks like a mass of new foliage. The bugs are attracted to the cards, get stuck in the jelly, and die.

To control whiteflies, there are various solutions and traps that you can use. The biggest tip is: start early! In the mornings and evenings, as you wander the garden or tend to your houseplants, check the back of the leaves for eggs or notice when little bugs “fly away” as you approach your plants.
- Always start with blasting whiteflies (as with aphids and many other insect pests) with your watering hose or a spray bottle. This will cause them to scatter and will dislodge nymphs and eggs to some extent.
- Consider spraying your plants’ leaves with an insecticidal soap, following the directions on the packaging. Be sure to spray the undersides of leaves, too. Follow up 2 or 3 times, as necessary. 
Spray plants in the evening when temperatures are cooler, as mid-day heat may cause an adverse reaction in your plant. Plus, spraying in the evening allows you to avoid accidentally spraying any pollinators or beneficial insects.
- According to the National Gardening Association, the following simple homemade mixture should be helpful to control and deter whiteflies: Use a mix of dish soap and water. A good squirt of soap to a gallon of water should work. As mentioned above, only spray in cooler temperatures; late in the day is best. The NGA mixture is a pretty benign combination, and whiteflies are nearly impossible to get rid of, so it’s best to try more preventative tactics first, as mentioned below.
- If all else fails and your whitefly population is persistent, you can (carefully) use a handheld vacuum every few days to remove them from your plants. This gets rid of both nymphs and adults. Just be sure NOT to empty your vacuum into a trash can inside your home afterward

Whiteflies

If the stem is mushy or brittle, check the roots for the same conditions. The roots, too, should be pliable but firm. If both the stems and roots are brittle or mushy, the plant is dead and you will simply need to start over.

Repot your plant. Use a high-quality indoor plant potting mix to revitalise your plant, and choose a pot that's wider than the last one. ... Trim your plant. If there's damage to the roots, trim back the leaves. Move your plant.  Water your plant.  Feed your plant.  Wipe your plant.

Gently remove the plant from its container. If you see more roots than soil, or roots coiling around the inside of the pot, it is time for a bigger container. Over time, most plants outgrow their pots. Sometimes, all it takes to revive a dying plant is a little repotting.

Dead plant

Tissues affected by the symptoms of Erwinia amylovora include blossoms, fruits, shoots, and branches of apple (Pomoideae), pear, and many other rosaceous plants. All symptoms are above ground and are typically easy to recognize. Symptoms on blossoms include water soaking of the floral receptacle, ovary, and peduncles. This results in a dull, gray-green appearance at 1–2 weeks after petal fall, and eventually tissues will shrivel and turn black. The base of the blossom and young fruit show similar symptoms as infection spreads. Opaque white- or amber-colored droplets of bacterial ooze can be seen on the infected tissue when the environment is high in humidity. Shoots show similar symptoms but develop much more rapidly. A “Shepherd's Crook” can be seen when the tip of the shoot wilts, and diseased shoot leaves typically have blackening along the mid-vein and then die. In number, diseased shoots give the tree a blighted appearance. Initial infection of blossoms and shoots can spread to larger tree limbs. Branches will darken and become water soaked. Advanced infection develops cracks in bark and a sunken surface. Wood under the bark will become streaked with black discoloration. Immature fruit forms water-soaked lesions and later turned black. Bacterial ooze can be found on these lesions. Severe infections result in fruit turning entirely black and shriveling.

Phytosanitary measures have been employed as the best sanitary measures against E. amylovora dispersal. High risk countries are encouraged not to import plants susceptible to the pathogen into their territory because, once the bacteria become established in an area it is nearly impossible to eradicate the disease. Nurseries and orchards in such regions are placed on strict phytosanitary surveillance measures and well-monitored. Imported and infected crops are destroyed as soon as they are noticed since the bacteria spreads very rapidly and eradication methods are usually costly and inefficient.

The only effective treatment for plants already infected is to prune off the affected branches and remove them from the area. Plants or trees should be inspected routinely for the appearance of new infections. The rest of the plant can be saved if the blighted wood is removed before the infection spreads to the roots. There is no known cure; prevention is the key.

Fire blight

As a general rule, common symptoms of a bad root knot nematode infestation can include chlorosis (yellowing of the leaves/stems), stunted growth, wilting, and a lack of production of fruit.
However, these may be nonexistent to severe depending on the population of nematodes, the health of the plant, the natural resistance of the plant, and any number of other factors in the soil makeup. It can also be hard to separate the symptoms from other pest/disease issues.
The only real way to be sure that it is in fact root knot nematodes is to carefully remove a plant from the soil and examine its roots. If there are a lot of galls growing along the root system, it’s likely root knot nematodes at work.
While these microscopic nematode parasites can be problematic, root knot nematodes are not uncontrollable. They may be tricky, but with good garden management, you won’t have negative consequences!

Prevention is always the best cure for a pest problem, and root knot nematodes are no exception. So let’s talk about prevention.
First off, plant nematode-resistant varieties. There are a wide variety of different seed suppliers who carry nematode-resistant seed stock, usually notated as an N in the resistance charts.
If you cannot plant nematode-resistant strains, practice good crop rotation. Some species of root knot nematodes are more selective than others. Planting cover crops like marigolds or sudangrass between at-risk crops will also bring down the nematode population.
Remove the roots of old plants when clearing the bed. As root knot nematode juveniles can live in the galls they form on the roots, they will continue to multiply even as the roots are dying out. Removing the remaining root mass can extract those juveniles.
Till the soil 2-3 times in the fall. This breaks up the soil, turning the nematodes up to the surface where they will die off from exposure to the sunlight. This will impact both beneficial and parasitic nematodes, so you may need to re-add beneficial nematodes again in the spring.
Plant overwintering grass cover crops like wheatgrass, ryegrass, or rye. Sudangrass is also good and offers some nematicide properties. Keep these mowed down to a manageable level, and till them under in the spring to add more plant matter to the soil.
Regularly add more organic material to your soil. Adding more composted leaves, grass clippings, and manure to your beds will help naturally control the population of nematodes in the soil, since nematodes prefer living material to decaying plant matter.

There are two organic nematicide variants available: ones based on geraniol (the oil of geraniums), and ones based on quillaja saponaria, the soap bark root. Remember, though, that nematicides will kill off both beneficial and parasitic nematodes.
Quillaja saponaria compounds such as Monterey Nematode Control use the saponins from the soap bark tree to help reduce nematode populations.
You can also use an azdirachtin product such as AzaMax, which is a pure azdirachtin extracted from neem oil. This may work as a light nematicide, but tends to be better against other pests such as spider mites, thrips, aphids, and more.
Add neem seed meal, crab meal, or oyster shell flour to your soil. All three are fertilizers, but they’re great soil builders in the war against root knot nematodes.
Neem seed meal is a gentle fertilizer which is made from the leftover material after making neem oil. It helps reduce a number of pests naturally, plus it breaks down to add low levels of nitrogen to the soil. It also can help strengthen the roots of plants to make them resistant.
Crab meal encourages beneficial soil microorganisms which reduce nematode population. It also helps plants to increase the strength of their cell walls, making them more naturally resistant to many conditions.
Oyster shell flour is in essence a form of diatomaceous earth. While it has less effect when it’s wet, it can help make the soil less hospitable to nematode populations and reduce other pests as well.
Black walnut leaves and hulls have a natural compound in them which is called juglone. This compound is an extremely effective killer of root knot nematodes, but can have an adverse effect on some plants. That’s why there’s few weeds around walnut trees!
If you want to put an organic source of juglone to work in your garden, use fresh walnut leaves or smashed hulls as a thick layer of compost on your bed, or just build a tall pile there. Regularly turn it to keep it composting. I use leaves, as they’re quick to break down.
The juglone compounds will seep into the soil when you wet down the pile, and after three to six months should have broken down enough that they will no longer be toxic to other plants. This also helps wipe out weeds or other pests that may be in your beds during composting.

Root-knot Nematodes

Plants' roots are not typically visible as they are below the surface of the soil, so the symptoms of root rot are often apparent only when the disease is advanced. Roots of plants affected by root rot may turn from firm and white to black/brown and soft. Affected roots may also fall off the plant when touched. The leaves of affected plants may also wilt, become small or discolored.Affected plants may also look stunted due to poor growth, develop cankers or ooze sap. Prolonged root rot may lead to death of the plant. In extreme cases, plants affected by root rot may die within 10 days. Root rot is usually[citation needed] lethal although it is treatable. An affected plant will not normally survive, but may potentially be propagated.

To prevent recurrence and progression of root rot, it is recommended to water plants only when the soil becomes dry, and to plant the plant in a well-drained pot. It is recommended that pots used for diseased plants should be sterilized with bleach to kill potential spores. This allows the plant to drain properly and prevents fungal spores affecting the plant. It is recommended to keep the soil around the plant as dry as possible and to pry back the soil to allow proper aeration.

The most effective treatment for root rot is prevention such as destruction of affected plants. It is recommended that, in localised cases of root rot, the affected plant simply be destroyed and the surrounding soil replaced. Treatment options depend on the extent of the rot. To treat root rot, is recommended to replant the affected plant in fresh soil with good drainage to avoid standing water. It is also recommended to gently wash diseased roots and remove all brown, soft parts of the roots with a sterilized pair of scissors or a tool such as a pulaski for larger roots. Rapid treatment and replanting of root rot is imperative to stop the disease spreading to the rest of the affected plant or to other plants and to allow plants to form new roots. Chemical treatments, such as fungicides, chloropicrin and methyl bromide may also be used to limit progression of the disease but must be specific to the responsible pathogen. Some sources claim that cinnamon powder is an effective treatment for reducing spread of root rot, when applied to exposed tissue after removal of diseased tissue. Cinnamon is also claimed to act as a potential fungicide.

Root rot

On the apple tree, the infections occur on leaves, fruit and young twigs. The brightly colored spots produced on the leaves make it easy to identify. Small, pale yellow spots appear on the upper surfaces of the leaves, usually during late April or May on the eastern seaboard of the United States. These spots gradually enlarge and turn orange or red and may show concentric rings of color. Drops of orange liquid may be visible on the spots. Later in the season, black dots appear on the orange spots on the upper leaf surface. In late summer, tube-like structures develop on the undersurface of the apple leaf. Infected leaves sometimes drop prematurely, particularly during drought conditions or when the tree is under additional stress. Infections on fruit are usually near the blossom end and are somewhat similar to the leaf lesions. On the eastern red cedar host, the fungus produces reddish-brown galls from 1⁄4–1 inch (6.4–25.4 mm) in diameter. These galls can be mistaken for cone structures by the uninitiated. After reaching a diameter of about 1⁄2 inch (13 mm), they show many small circular depressions. In the center of each depression is a small, pimple-like structure. In the spring these structures elongate into orange gelatinous protrusions or horns. The spore-bearing horns swell during rainy periods in April and May. The wind carries the microscopic spores to infect apple leaves, fruit and young twigs on trees within a radius of several miles of the infected tree. On other species of juniper more common in landscaping and bonsai, the sizes of the infections are reduced. Early in the infection, the galls are small bumps on the woody portions of the plant. They maintain the orange gelatinous form after the first warm rains of spring but generally on a greatly reduced scale.

Fungicide sprays applied in a timely manner are highly effective against the rust diseases during the apple cycle. Most sprays are applied four times at 7- to 10-day intervals, starting with pink bud on crabapples. These applications are to protect the apples from spores being released from the cedar host in mid-spring. If cedar apple rust disease is diagnosed on apple fruits and leaves it is far too late to spray. Systemic fungicides are available. Fungicides listed for use on apples can be used in July and August on the cedars to reduce infection. Application of fungicides to the junipers before and while they are in the infectious orange gelatinous state seems to reduce the severity of the outbreak.

Because apples are an economically important crop, control is usually focused there. Interruption of the disease cycle is the only effective method for control of the cedar apple rust. The recommended method of control is to “remove cedars located within a 1 mile (1.6 km) radius” of the apples to interrupt the disease cycle, though this method is seldom practical. For those doing bonsai, it is common to have the trees within feet of each other and on the central eastern seaboard of the United States, Eastern Red Cedar is a common first-growth conifer along roadsides.

Cedar-apple rust

Nymphs and adults feed on plant juices, attacking leaves, stems, buds, flowers, fruit, and/or roots, depending on the species. Most aphids especially like succulent new growth. Some, such as the green peach aphid, feed on a variety of plants, while others, such as the rosy apple aphid, focus on one or just a few plant hosts.
- Look for misshapen, curling, stunted, or yellowing leaves. Be sure to check the undersides of leaves; aphids love to hide there.
- If the leaves or stems are covered with a sticky substance, that is a sign that aphids may have been sipping sap. This “honeydew,” a sugary liquid produced by the insects as waste, can attract other insects, such as ants, which gather the substance for food. When aphids feed on trees, their honeydew can drop onto cars, outdoor furniture, driveways, and so on.
- The honeydew can sometimes encourage a fungal growth called sooty mold, causing branches and leaves to appear black.
- Flowers or fruit can become distorted or deformed due to feeding aphids.
- Some aphid species cause galls to form on roots or leaves.
- Aphids may transmit viruses between plants, and also attract other insects that prey on them, such as ladybugs.

- For fruit or shade trees, spray dormant horticultural oil to kill overwintering aphid eggs.
- Beneficial insects, such as ladybugs, lacewings, and parasitic wasps, will feed on aphids. Supplemental populations of these insects can be ordered online and should help keep the aphid populations controlled from the start.
- Companion planting can be very helpful to keep aphids away from your plants in the first place. For example:
1 Aphids are repelled by catnip.
2 Aphids are especially attracted to mustard and nasturtium. Plant these near more valuable plants as traps for the aphids. (Check your trap plants regularly to keep aphid populations from jumping to your valued plants.)
3 Nasturtiums spoil the taste of fruit tree sap for aphids and will help keep aphids off of broccoli.
4 Garlic and chives repel aphids when planted near lettuce, peas, and rose bushes.

- Try spraying cold water on the leaves; sometimes all aphids need is a cool blast to dislodge them. Typically they are unable to find their way back to the same plant.
- If you have a large aphid invasion, dust plants with flour. It constipates the pests. 
- Neem oil, insecticidal soaps, and horticultural oils are effective against aphids. Be sure to follow the application instructions provided on the packaging.
- You can often get rid of aphids by wiping or spraying the leaves of the plant with a mild solution of water and a few drops of dish soap. Soapy water should be reapplied every 2-3 days for 2 weeks.
- One variation of this soap-water mix includes cayenne pepper: Stir together 1 quart water, 1 tsp liquid dish soap, and a pinch of cayenne pepper. Do not dilute before spraying on plants.
- Diatomaceous earth (DE) is a non-toxic, organic material that will kill aphids. Do not apply DE when plants are in bloom; it is harmful to pollinators, too.

Aphids

The typical signs are brown or black feeding punctures visible on the affected plant tissues. Another conspicuous sign is honey dew, a sweet excretion that is released by the sucking insect. Often ants are attracted to feed on the honey dew.

Most true bugs do not cause serious harm to established plants. Provide proper cultural care so plants are vigorous. Provide adequate irrigation. Avoid growing shade-adapted species in full sunlight.

Effective ways to get rid of these stink bugs include sealing the house, dusting treatment, spraying with nicotine water, and using insect repellents. Stink bugs, also referred to as shield bugs, are a group of flying insects that belong to the Pentatomidae family of the order Hemiptera.

Hemiptera

All members of the class produce basidiocarps which range in size from tiny cups a few millimeters across to a giant polypore (Phellinus ellipsoideus) greater than several meters across and weigh up to 500 kilograms (1,100 lb). Agaricomycetes produce mushrooms, and are therefore the most familiar and conspicuous of all Fungi. Other Fungi produce macroscopic fruiting bodies as well, but the diversity of forms in the Agaricomycetes is unmatched.

A proven fungicide that prevents disease from becoming active and treats it quickly is a crucial part of your protection plan. GardenTech® Daconil® Fungicide, with the active ingredient chlorothalonil, provides protection against a broad spectrum of fungal pathogens and simplifies controlling fungal disease from your garden.

Used as a preventive and an active treatment, Daconil® Fungicide can prevent, control or stop more than 65 types of fungal disease on flowers, vegetables, shrubs, fruit and shade trees.

Agaricomycetes

Spider mites damage foliage by sucking juices from the leaves. This shows up as stippling on the leaves and more severe damage can result in leaf bronzing that may lead to leaf drop. Leaf drop increases incidence of sun/light burn and negatively affects both vegetative and flowering stages. 
Additional signs of spider mites are curled and/or burned leaf edges as well as leaves that have taken on a leathery texture. Webbing will be produced when mite populations grow in size and can be found on foliage, twigs and fruit/buds.

Look before you buy:
Inspect indoor and outdoor plants before purchasing to make sure they aren’t infested.
Keep plants healthy:
Make sure plants are well-watered and fertilized. Healthy plants are more able to withstand pests and diseases, while weakened or stressed plants are more susceptible to problems.
Keep the area clean:
Clear weeds and debris out of garden areas where pests can more easily hide.
Bump up moisture levels:
Since spider mites thrive in dry conditions, keep air humidity levels higher around plants.
Use high-quality soil:
Use a high-quality, sterile potting soil to avoid possible soil-borne pests.

Chemical pesticide use actually encourages the spread of spider mites by killing the beneficial insects that prey on them. Mites are also known to develop quick resistance to various pesticides. For these reasons, it’s important to control mites with effective natural and organic methods.
1 Prune leaves, stems and other infested parts of plants well past any webbing and discard in trash (and not in compost piles). Don’t be hesitant to pull entire plants to prevent the mites spreading to its neighbors.
2 Wash plants with a strong stream of water and reduce pest numbers.
3 Commercially available beneficial insects, such as ladybugs, lacewing and predatory mites are important natural enemies. For best results, make releases when pest levels are low to medium.
4 Nuke Em, a relatively new organic insecticide containing food-grade ingredients, works fast and kills most indoor gardening pests at the egg, larvae or adult stage. Best of all, it does this without leaving a residue on the leaves that can impact flavor.
5 BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome crop pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
6 Mix Pure Neem Oil with Coco-Wet and apply every 3-5 days to kill pest eggs indoors and interrupt the reproductive cycle. Make sure to spray all plant parts, including the undersides of leaves. Do NOT apply when temperatures exceed 90˚F and wait at last six hours before turning lights on.
7 If populations are high, use a least-toxic, short-lived pesticide (Take Down Spray, Doktor Doom Foggers) to reduce infestations, then release predatory mites to maintain control.
8 Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas.
9 On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs.
10 Dust on leaves, branches and fruit encourages mites. A mid-season hosing (or two!) to remove dust from trees is a worthwhile preventative.
11 Water stress makes both trees and garden plants more susceptible to mite infestations. Make sure your plants are properly watered.

Spider Mites

Ascomycetes are characterized by septate hyphae with simple pores. Asexual reproduction by conidia. Sexual reproduction by ascospores, typically eight, in an ascus. Asci are often housed in a fruiting body or ascocarp e.g. cleistothecia or perithecia.

Good gardening habits and effective treatment help prevent, stop and control fungal disease: 

1. Start by planting healthy stock. ...
2. Choose planting sites based on plant needs. ...
3. Avoid overhead watering. ...
4. Water early in the day. ...
5. Don't crowd plants. ...
6. Don't work a wet garden. ...
7. Treat with a trusted, proven fungicide.

To control fungal outbreaks, as with bacteria, remove all infected plant parts, or plants. You may also choose to apply a fungicide. There are many products available for treatment, organically (copper, sulfur, and baking soda are common) or synthetically.

Ascomycetes

Symptoms of Phytophthora diseases are not restricted to root rots because some species attack only aboveground parts of the plant. Large necrotic leaf or stem blotches characterize late blight of potato and tomato. Under the leaf, along the leading edge of the necrotic tissue, a downy, white growth may develop. Defoliation and a dieback starting at branch tips characterize holly tip blight. Rhododendrons develop a leaf spot and blight in winter caused by P. syringae. Crabapple or flowering pear nursery stock can develop a black, sunken canker several inches above the soil due to the same organism.

The most effective way of preventing Phytophthora rot diseases is to provide good drainage and to practice good water management. Along with the appropriate cultural controls, the fungicide fosetyl-al (Aliette) may be used on a number of ornamental plant species to help prevent Phytophthora infections.

High temperatures have been used to control Phytophthora in many ways. Steam heat is effective to kill Phytophthora in contaminated soil, media or on planting containers such as pots. If you re-use pots you can soak pre-cleaned pots in hot (180°F) water for at least 30 min or use aerated steam (140°F) for 30 min.

Phytophthora

The first sign of powdery mildew is pale yellow leaf spots. White powdery spots can form on both upper and lower leaf surfaces, and quickly expand into large blotches. The large blotches can cover entire leaf, petiole and stem surfaces. When powdery mildew infects the majority of the foliage, the plant weakens and the fruit ripens prematurely.

Control is possible with triadimefon and propiconazole. It is also possible with hexaconazole, myclobutanil, and penconazole.

Standard fungicides are an effective way to manage powdery mildew disease on plants. Spray programs of conventional fungicides are advised to begin when powdery mildew symptoms and signs are first noticed. Conventional fungicides should be applied on a regular basis for best results against the disease.

Powdery mildew

Canker, plant disease, caused by numerous species of fungi and bacteria, that occurs primarily on woody species. Symptoms include round-to-irregular sunken, swollen, flattened, cracked, discoloured, or dead areas on the stems (canes), twigs, limbs, or trunk.

Control includes removing diseased parts in dry weather; growing adapted or resistant varieties in warm well-drained fertile soil; avoiding overcrowding, overwatering, and mechanical wounds; treating bark and wood injuries promptly; controlling insect and rodent disease carriers; wrapping young trees to prevent.

The main measures for controlling the residue are the destruction of vegetation after harvest; cutting and burning of plant parts most severely damaged by anthracnose; spraying with 1% Bordeaux liquid.

Canker

Primary symptoms of infection include wilting leaves, blight of young shoots, sunken and darkened areas of stems with possible sap or resin flow, cankering on larger stems and branches, browning of the vascular tissue when bark is scraped away, and canopy dieback.

Avoid planting sites prone to spring frosts and use fertilization, irrigation, and weed control practices that discourage late-season growth and promote early hardening off. Sprays for mummy berry and botrytis may help, particularly during flowering.

Prune and discard all blighted stems and cankered branches from the canopy. For trees with thin bark and dense canopies (e.g. Japanese maple and kousa dogwood), annual sanitation pruning of dead stems, especially on interior canopy branches, can help to avoid disease outbreaks in the future.

Phomopsis cankers and blights

Flowers or leaves may develop silvery streaks. Heavily infested leaves appear brownish or silvery, and growing points may become contorted. Some species of thrips leave sooty spots of black fecal matter on the leaves. Thrips also vector plant diseases.

The main measures you can apply to control this pest are primarily a matter of proper maintenance of the garden. Here’s what you can do to keep away the plants in your garden from a thrip infestation: take care of your garden soil, water it regularly and apply mulch on it. It is known that thrips are attracted to plants that are already ill or unhealthy and thus, they can often be seen on plants growing in harsh conditions, such as in dry land, not irrigated and without mulch on it;
eliminate all vegetal residues, such as dry or wilted flowers;
do not fertilize the soil more than necessary, as this will encourage the growth of other juicy plants, that will attract other pests, such as aphides;
cultivate plants that are adapted to the environment from the area; if you cultivate plants that prefer sun, in a shady and chilly area, they will become more predisposed to thrip infestation.
be vigilant and periodically inspect the plants to see if they have or have not been infested. You can see signs of thrips infestation in the inferior sides of the leaves and in the nip between the leaves and stems. Do not hesitate to remove the already infested plants and to cut the grass and weeds around your home to exclude alternative hosts where thrips could relocate.
do not cut the leaves off of the plants that thrips prefer with a scissor, as this will determine a younger and softer leaf to grow, thus pleasing these pests;
inspecting all the plants you buy before you bring and plant them into your garden;
provide good, constant irrigation to plants;
using row covers, hot caps, or other kinds of cages with a fine mesh in order to keep thrips (and other insects) away from vulnerable vegetables or young plants; once the latter become larger, though, it is important to remove the covers, allowing them enough growing space.

When controlling thrips, you can prune and get rid of any injured areas on the plant. Regular pruning helps get rid of thrips. Thrips on flowers can be eliminated as soon as you see signs of damage by using a mild insecticide like insecticidal soap or neem oil, or by pruning the flowers.

Thysanoptera

Leaf spots start as small brown spots, often with a yellow halo, and grow into irregular brown spots (up to 3/4"). Leaf spots sometimes develop a target-like pattern of rings. Severely infected leaves turn brown, curl upward, wither and die.

Avoid overhead watering to limit leaf wetness, and allow enough space at planting time for good air circulation and ample sun penetration. Keep your garden free of fallen leaves all season, and especially thorough at fall cleanup time.

Treatment for Alternaria requires fungicide to be sprayed directly on infected plants, as well as improvements in sanitation and crop rotation to prevent future outbreaks. Organic gardeners are limited to sprays of captan or copper fungicides, making control much more challenging.

Alternaria blight

These weevils are pests of over 100 plants, ranging from weeds to shrubs to greenhouse plants. Some of the common host plants in Maryland include azalea, holly, strawberry, rhododendron, yew, and grape.
When weevils are present in low numbers only a few notches on the edges of leaves will be apparent. If many weevils are present, the leaves are often scalloped and left with only the main vein.
The grubs are highly destructive to plants. When small, grubs consume feeder roots. Larger grubs feed on larger roots, stripping the bark and sometimes girdling the plant crown. This blocks the flow of water and nutrients to the foliage.
Infested plants have stunted growth; leaves turn yellow and then wilt.

1 Quarantine or dispose of any soil from pots where vine weevil have been found. Don't reuse this or throw on the garden because it may still contain vine weevil eggs, larvae or pupae.
2Remove plants that have unexplainably wilted and died and examine the roots. If they appear eaten, then search the surrounding soil and destroy any vine weevil larvae that you find.
3 Look for leaf edge notching on garden plants to indicate where adult vine weevils are feeding. Then treat the surrounding soil with nematodes during the summer months to control any larvae that appear.
4 Avoid using broad spectrum insecticides which will kill soil-dwelling predators of vine weevil larvae, such as centipedes and carab beetles.
5 Encourage insectivorous birds by hanging feeders in winter and provide nesting boxes in spring.

- Check plants every week to prevent weevil infestations becoming out of control and deal with early signs immediately.
- Remove and destroy newly-hatched adults to reduce the numbers of eggs laid in the soil. This is best done at night, with a torch, when the weevils are most active.
- Use netting and fleeces to stop adults moving between plants and laying eggs within pots.
-Replant perennial pot plants in the spring and look for and remove any vine weevil larvae you find.
- Use commercially available nematodes (microscopic worm-like creatures) Steinernema kraussei and Heterorhabditis megidis that can be watered into pots or surrounding soil to control vine weevil larvae. The nematodes seek out and kill vine weevils.
- BotaniGard ES is a highly effective biological insecticide containing Beauveria bassiana, an entomopathogenic fungus that attacks a long-list of troublesome pests – even resistant strains! Weekly applications can prevent insect population explosions and provide protection equal to or better than conventional chemical pesticides.
- Fast-acting crack and crevice sprays, like Don’t Bug Me, can be used around windows, doors and vents to prevent adult weevils from entering structures.
- Least-toxic botanical insecticides should be used as a last resort. Derived from plants which have insecticidal properties, these natural pesticides have fewer harmful side effects than synthetic chemicals and break down more quickly in the environment.

Weevils

Death can occur with a sudden browning of the leaves, as with the red oaks, or over time with gradual leaf loss. P. ramorum infection in twigs can lead to shoot tip dieback and wilting. Shoot tip wilting, or flagging, can be useful in identifying trees that are infected but not showing bleeding symptoms.

Truly, the best defenses against Sudden Oak Death include avoiding moving the host plant material long distances, knowing exactly where the disease is, and avoiding traveling in infected areas.

There is no treatment for sudden oak death. A fungicide can be used to allay some of the symptoms but it cannot be cured. Preventative actions are the most successful, by creating barriers between infected and non-infected areas and removing infected plants after they've been diagnosed.

Sudden oak death

The spores are hyaline, of various shapes, and are released through a circular apical pore.

To prevent powdery mildew from forming in the first place, avoid low-temperature, high-humidity environments. Do not crowd plants. Do not grow susceptible plants in the shade. Water the soil, not the plants.

Use sulfur-containing organic fungicides as both preventive and treatment for existing infections.

Leotiomycetes

Botryosphaeria obtusa enters the fruit through wounds. These can be made by insects, birds or growth cracks. At first a brown spot, near the calyx, appears on the fruit. The spot on the fruit then enlarges and black/brown rings appear on the fruit. The fruit holds its shape, however, unlike other fruit diseases. The fruit will then wither up and can remain on the tree for another year before falling off. During this time pycnidia appear on the surface of the rotted fruit.

Start with clean seed. In warm, humid weather, a single infected seed in as many as 10,000 could lead to a black rot outbreak.

The most effective treatment is to prune out the infected areas on trees, to ensure transfer between trees does not occur. Fruit that is infected can stay on the tree for over a year, and therefore remaining fruit should be removed to avoid another source of inoculation for other trees. The trimmed branches or dead fruit should then be burned or disposed of immediately as the organism can survive on the dead tissue for a long period of time. Infection of leaves and fruit can be avoided by spraying them with a fungicide. The treatment for the fungicide should be also kept up to date via the manufacturer's instructions.

Black rot

Loss of chlorophyll, with the resulting yellowing of the leaves is the most obvious sign of senescence and in some cases, as seen in Figure 1a and c, the additional synthesis of anthocyanins during senescence results in dramatic orange, red and even purple coloration.

Leaf senescence occurs when the leaf is no longer of use to the plant. It is a normal aging process.

Senescence

Plants with severe rust infection may appear stunted, chlorotic (yellowed), or may display signs of infection such as rust fruiting bodies. Rust fungi grow intracellularly, and make spore-producing fruiting bodies within or, more often, on the surfaces of affected plant parts.

Pick off and destroy infected leaves and frequently rake under plants to remove all fallen debris. Water in the early morning hours — avoiding overhead sprinklers — to give plants time to dry out during the day.

Select rust-resistant plant varieties when available.

Pucciniaceae

Leaf curl and distortion. Leaf yellowing or stippling. Necrotic leaf spots. White sporulation of the pathogen on lower leaf surface. Defoliation.

Use hygiene measures. Start clean, remove crop residues and prevent splashing water.

One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Peronosporea

The pathogen causes angular chlorotic lesions on the foliage. These lesions appear angular because they are bound by leaf veins. During humid conditions, inspection of the underside of the leaf reveals gray-brown to purplish-black fungal growth. This downy material is the sporulation of the pathogen. Magnification of the sporulation reveals the acutely and dichotomously branched sporangiophores bearing lemon-shaped sporangia. Eventually, leaves will turn necrotic and curl upwards. The disease is sometimes called wildfire because of how rapidly it progresses, as if the crop were burned by fire. Symptoms on watermelon and cantaloupe are different from on other cucurbits; leaf spots are typically not angular and turn brown to black in color. Often, an exaggerated upward leaf-curling will occur. Regardless of which cucurbit is involved, only the leaves are infected, not fruit, flowers, stems or roots. Disease of the leaves results in three major effects: 1. reduced yields, 2. a greater proportion of misshapen fruit, especially in cucumber, and 3. sunscalded fruit, due to increased exposure to direct sunlight, especially in watermelon and winter squash.

Early detection of downy mildew and immediate or preventative fungicide application is imperative for the control of this disease. A forecasting system exists to assist growers in timing their fungicide applications for maximum benefit. The system tracks outbreaks of the disease and provides a forecast or risk assessment for future outbreaks.

Resistant cultivars - Host resistance is an important tool in disease control and should be used whenever possible. Cultivars resistant to downy mildew have been developed for cucumber and cantaloupe and to a lesser extent for squash and pumpkin. Although cucumber downy mildew has been severe on resistant cultivars, these cultivars are more effective than susceptible cultivars in delaying infection. Chemical control - Chemical control is highly recommended because downy mildew is an aggressive and destructive disease and satisfactory control without the use of fungicides is unlikely. Both protectant and systemic products should be applied. Fungicides are most effective when applied prior to infection and reapplied at 5- to 7-day intervals. The following products have proven to be the most effective fungicides in cucumber downy mildew control in North Carolina trials conducted annually from 2004 to 2008: Presidio (fluopicolide, Valent), Ranman (cyazofamid, FMC), Previcur Flex (propamocarb, Bayer), Curzate (cymoxanil, DuPont), Tanos (famoxadone and cymoxanil, DuPont), and Gavel (zoxamide and mancozeb, Dow AgroSciences). These products should be applied in a program to prevent pathogen resistance, that is, rotated with fungicides of a different mode of action. Protectant fungicides such as chlorothalonil and mancozeb should be used as mixing partners. Вiological control - Although many biological control products have been evaluated for their ability to control downy mildew, none have proven effective and are not recommended for use.

Cucurbit downy mildew

Initial symptoms include large, angular or blocky, yellow areas visible on the upper surface. As lesions mature, they expand rapidly and turn brown. The under surface of infected leaves appears watersoaked. Upon closer inspection, a purple-brown mold (see arrow) becomes apparent. Small spores shaped like footballs can be observed among the mold with a 10x hand lens. In disease-favorable conditions (cool nights with long dew periods), downy mildew will spread rapidly, destroying leaf tissue without affecting stems or petioles.

As downy mildew like moist conditions, avoid dense planting and control weeds, to provide good air circulation around the plants. Water plants early in the morning, like watering plants in the evening, leads to high humidity that persists throughout the night.

Because the downy mildew pathogen does not overwinter in midwestern fields, crop rotations and tillage practices do not affect disease development. The pathogen tends to become established in late summer. Therefore, planting early season varieties may further reduce the already minor threat posed by downy mildew. Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. One way to control downy mildew is to eliminate moisture and humidity around the impacted plants. Watering from below, such as with a drip system, and improve air circulation through selective pruning. In enclosed environments, like in the house or in a greenhouse, reducing the humidity will help as well.

Downy mildew

Uneven swelling and maturation of the drupe, as well as premature staining without enlargement.

Neem oil as a preventative or light-infection treatment. Copper fungicides or phosphorus acid fungicides can treat larger scale infections. Prevention is the best cure.

Planting resistant cultivars. Treating with hot water on Roses cuttings can be effective, the water must be 44 degrees and treated for 15 minutes.

Peronosporaceae

The signs of damage vary, typically depending on the way that the insect feeds on the plant. Damage from insects with chewing mouthparts typically appears on leaves or stems as ragged edges, holes, or other missing tissue. Insects that often cause chewing damage include caterpillars and Eastern lubber grasshoppers.

Preventing the transmission of viruses can be the chief reason to control certain insects. An example is the importance of controlling western flower thrips when growing impatiens. Their transmission of tomato spotted wilt virus can devastate a crop being started in a greenhouse.

The most common way of damaging the crops is through direct injury, caused by feeding on above-ground and below-ground plant parts. This type of direct crop injury is related to the insect's mouthparts. For example, insects with chewing mouthparts, such as beetles, damage the crop by chewing the leaves or some other plant parts. Moreover, some of them cause damage by boring into the plant tissue, such as stem boring insects or leaf miners.

Feeding damage by insects

Phytoplasmas can infect and cause various symptoms in more than 700 plant species. One characteristic symptom is abnormal floral organ development including phyllody, (i.e., the production of leaf-like structures in place of flowers) and virescence (i.e., the development of green flowers attributable to a loss of pigment by petal cells). Phytoplasma-harboring flowering plants may nevertheless be sterile. The expression of genes involved in maintaining the apical meristem or in the development of floral organs is altered in the morphologically affected floral organs of phytoplasma-infected plants. A phytoplasma infection often triggers leaf yellowing, probably due to the presence of phytoplasma cells in phloem, which can affect phloem function and carbohydrate transport, inhibit chlorophyll biosynthesis, and trigger chlorophyll breakdown. These symptoms may be attributable to stress caused by the infection rather than a specific pathogenetic process. Many phytoplasma-infected plants develop a bushy or "witch's broom" appearance due to changes in their normal growth patterns. Most plants exhibit apical dominance but infection can trigger the proliferation of axillary (side) shoots and a reduction in internode size. Such symptoms are actually useful in the commercial production of poinsettias. Infection triggers more axillary shoot production; the poinsettia plants thus produce more than a single flower.

Phytoplasmas are normally controlled by the breeding and planting of disease-resistant crop varieties (perhaps the most economically viable option) and by the control of insect vectors.

Plantibodies targeting phytoplasmas have also been developed. Tetracyclines are bacteriostatic to phytoplasmas.However, disease symptoms reappear in the absence of continuous antibiotic application. Thus, tetracycline is not a viable agricultural control agent, but it is used to protect ornamental coconut trees.

Phytoplasma

Raised yellowish-orange, powdery pustules on the surface of infected foliage. Significant foliar dieback occurs on especially susceptible cultivars.

As with other fungus, daylily rust thrives in moisture. Use soaker hoses rather than overhead watering systems and water in the morning rather than late in the day or at night. This will cut down on the amount of time that the leaves remain wet.

Do not move or transport infected plant material. Carefully inspect incoming plant material for signs of rust. Fungicide applications are needed for disease management, especially on susceptible cultivars. Contact your local extension office for information on ratings of cultivar susceptibility and current fungicide control recommendations.

Daylily rust

Leaves Go Yellow and Fall Off. Dropping Old and New Leaves Alike.  Wilting, Limp Leaves. Leaves Turning Splotchy Black or Dark Brown.  Mushy Roots Mean Overwatering.  An Overwatered Succulent Will Rot and Turn Mushy.

Soaking the ground for a longer period of time less often, and not watering by hand but using a sprinkler or soaker hose, is the way to handle that situation. Mulch around the plant will also help keep a more even level of moisture.

Move your plant to a shady area even if it is a full-sun plant. Remove any dead or dying leaves. These should be easily recognizable. Check your pot for proper drainage and, if possible, create additional air space around the roots. This will allow oxygen to reach the root zone. Remove any dead or dying roots and keep only the roots that are healthy. Water only when the soil is dry to the touch, but do not let it get too dry. You should also seize all fertilization at this point until the plant is healthy again. Treat with a fungicide.

Water excess and/or uneven watering

Brown, yellow, gray, or straw-colored needles at tip of current season's growth; needles usually stunted and shoot may curl. Branch dieback. Small, black fruiting bodies on needles, cones, or shoot tissue. Cankers on stems or branches. Oozing resin that adheres to blighted needles.

Preventing the initial infection is a better strategy than attempting to cure a diseased tree. The first line of defense in preventing disease is planting disease free stock, planting in a disease free area, and selecting a disease resistant species. Beyond the selection of clean, resistant stock and planting location, trees that have proper water and nutrient management are healthier and less susceptible to Diplodia tip blight. Controlling wood boring insects that create wounds for Diplodia to exploit, is another cultural practice that can prevent disease. Poor airflow and high humidity are conditions that favor disease development; keeping grass and weeds trimmed down at the base of the tree allows for better airflow and can limit disease development. Once a tree is diseased, the goal is to limit the amount of inoculum present. The blighted needles and cones will have the pycnidia survival structures that contain thousands of spores. Remove debris from the base of the tree and destroy. During dry weather (not during Spring or early Summer), cut away infected shoots, cones, and branches. Sanitary techniques like sanitizing pruning tools between each cut will prevent further spread of the disease.

When disease pressure is high, chemical controls is advised. First, spray should occur early spring at candle elongation. Repeated sprays should occur every two weeks until needles reach full size. Fungicides containing the following active ingredients have been shown to be efficacious: chlorothalonil, methyl, thiophanate-methyl, mancozeb, and copper hydroxide with mancozeb. Always read and follow the label.

Sphaeropsis blight

Initially spots of limited size, slightly concave, appear at the peduncular scar of some fruits, or near growth cracks or various wounds. They gradually spread with a fairly typical dark brown to black colour. The lesions decay further while their perimeter is clearly identified. They eventually cover a large proportion of ripe or unripe fruits if the environmental conditions are favourable. Whatever their development stage, the fruits undergo internal rot extending to the seeds. Brown to black globular structures, pycnidia, can be observed in the damaged tissues. They are spherical and irregularly shaped, ostiolate, and contain many hyaline and unicellular conidia, containing two lipid droplets.

Dothideomycetes

Symptoms usually involve necrotic, often water-soaked leaf spots, typically most severe on lower leaves. The spots may be very small at first but develop an angular shape as the movement of the bacteria is limited by leaf veins. Eventually several spots may enlarge, coalesce and cause death of mature leaves.

Reduce humidity to encourage dry foliage and avoid dripping within the greenhouse. Avoid splashing water from plant to plant.  Avoid excess moisture and late day irrigation.

Chemical treatments work best as a preventive measure. Copper-based plant protection products have bactericidal activity (kill bacteria) and can be effective. Disinfection products that contain hydrogen peroxide or quaternary ammonia are also available.

Gammaproteobacteria

Typical symptoms of potassium deficiency in plants include brown scorching and curling of leaf tips as well as chlorosis (yellowing) between leaf veins. Purple spots may also appear on the leaf undersides. Plant growth, root development, and seed and fruit development are usually reduced in potassium-deficient plants. Often, potassium deficiency symptoms first appear on older (lower) leaves because potassium is a mobile nutrient, meaning that a plant can allocate potassium to younger leaves when it is K deficient. Deficient plants may be more prone to frost damage and disease, and their symptoms can often be confused with wind scorch or drought. The deficiency is most common in several important fruit and vegetable crops; notably potatoes, brassicas, tomatoes, apples, currants, gooseberries, and raspberries. Sugar beets, cereals, and clover are also commonly affected.

The best way to prevent or solve this deficiency, is to add a potassium fertilizer to the plant. If necessary, it can be added to the nutritional feeding schedule if the shortage keeps occurring.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, vermiculite, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content but must be used cautiously due its effect on pH level. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Potassium deficiency

Scales attack hundreds of ornamental varieties, and are found everywhere ornamental plants are grown. While some scales infest a wide variety of plants, others are host-specific. Many ornamentals are attacked by a single scale species, while others are attacked by numerous species.
Scales damage plants by sucking the juices from the plants. Heavily-infested plants appear unhealthy and produce little new growth. Scales that feed on leaves can cause leaf spotting; spots progressively increase in size as the scales continue to feed. With serious infestations, leaves drop prematurely, and twigs and branches may be killed. The sooty mold that develops on the honeydew produced by soft scales inhibits the plant’s ability to harvest light energy, reducing photosynthesis and further weakening the host plant. Scales that feed on twigs or bark generally do not produce leaf discoloration, but long-term feeding weakens the host plant. A chronic infestation can kill the host.

Periodically inspect host plants, particularly plants that have been previously infested. Since scale insects may occur on all plant parts, check the trunk and branches, as well as the twigs and leaves. The midvein of the underside of the leaf is common site for leaf-feeding scales to inhabit. Stems should be checked around buds, leaf petioles and lenticles or other depressions which may offer a place for the scales to hide and feed. The color contrast between the bark and the scale can be increased by wetting the bark with water before inspecting. Crawlers, the immature mobile life stage, may be monitored for by placing double-stick tape on some branches of the plant.
Stressed plants are more susceptible to scale attack. Maintaining healthy plants will minimize the likelihood of a plant being attacked.
Keep susceptible host plants healthy and well watered; scales nearly always attack stressed plants. Inspect plants periodically for presence of scales. If an infestation is detected, treat before the infestation becomes too severe, and monitor the progress of the treatment in the weeks and months after application. Be aware of the most commonly occurring scale problems in your area. Annual applications of soil-systemic insecticides to susceptible ornamentals are a good idea, particularly if plants are under stress.

Armored scale insects would be a breeze to eliminate if not for their thick outer coatings. The insects themselves are quite vulnerable, so you don’t need to go in with a huge arsenal. Horticultural oil is the very best way to destroy armored scale while preserving the predators that will readily feed on their young during the mobile “crawler” stage. Ideally, timing your application with the emergence of crawlers from their mothers’ covers will eliminate an entire generation all at once. Repeat sprays at five to six week intervals will knock the colony back, and persistence will destroy them entirely. Before applying horticultural oil, ensure that your plant is well hydrated and not heat stressed. Most plants won’t have a problem with horticultural oil mixed appropriately, but the odd bush or tree might experience phytotoxicity, so try a small spot first a few days ahead of when you plan to spray the whole plant.
It also is important to remember that it may take weeks or even months before complete control is observed. Control is delayed if the host plant is under stress, as uptake of the systemic insecticide is slowed. Judging efficacy is complicated by the fact that the scale shells often remain on the plant long after the insecticide has killed the insect underneath. After application, test for efficacy by scraping the shell off the plant and looking for the soft, pulpy insect underneath. If only dry shells are scraped off, then the treatment probably was effective.

Armored and Soft Scales

Fungus gnat damage will appear similar to that of any other root-related issue, such as root rot. Lower leaves may turn yellow and drop, and the plant’s growth may slow down or stop completely. In particularly bad cases, wilting of the entire plant could occur, followed by the death of the plant if roots are extremely damaged. 
In small numbers, fungus gnats are more of an annoyance than anything. In fact, the adult gnats don’t actively harm plants nor people. If their population gets out of hand, however, the larvae may start feeding on plant roots, causing notable damage. This is especially bad for young plants, such as seedlings, which have only a few delicate roots. Fungus gnats are also capable of spreading the plant pathogen that causes damping off and the eventual death of seedlings.

1. Keep soil dry: Fungus gnats seek out moist soil, so allowing your houseplants to dry out a bit between waterings can slow down or stop an infestation. Let the top inch or two of soil dry out before watering again, and try to go as long as possible between waterings. Gnats may be deterred from laying their eggs if the soil is dry on the surface.
2. Mosquito dunks (with beneficial bacteria): Mosquito dunks are used to keep mosquito larvae from populating fountains, animal troughs, fish ponds, and other small bodies of water. The product consists of a dry pellet containing a type of bacteria called Bacillus thuringiensis subspecies isrealensis. This beneficial bacteria infects and kills the larvae of flying insects, including mosquitoes, fruit flies, and fungus gnats.
To use mosquito dunks: Fill up a gallon jug (or watering can) with clean water and toss in a mosquito dunk. It’s a good idea to break up the dunk a bit before placing it in the water, or you can wait for it to soften before breaking it apart. Let the dunk soak in the water for as long as possible (at least overnight), then remove it from the water (the dunk can be reused) and use this water for fungus gnat–infested plants. The bacteria will have leeched into the water and will now infect and kill any larvae that come into contact with it in the soil. Repeat this process every time you water your plants for at least a few months.
3. Cover drainage holes: Though gnats typically remain near the tops of pots, they may find their way to the drainage holes on the underside of a pot and start laying eggs there, too. If this happens, cover the drainage holes with a piece of synthetic fabric to prevent the gnats from getting in or out of the hole, but to also let water pass through freely. Attach with tape or rubber bands.

Getting rid of fungus gnats is all about consistency. Catching the adults is fairly easy, but because the adult population comes in cycles, you need to make sure that your traps are refreshed regularly. For the best results, use a combination of the traps :
1. Sticky cards traps: These traps consist of a yellow note card covered in a sticky adhesive. They are most effective when cut into small squares and placed directly on top of the soil or attached to skewers just above the soil. Adult gnats will fly or crawl onto the card and become trapped. Fungus gnats are attracted to the color yellow, so use the yellow sticky cards rather than the blue ones. 
2. Cider-vinegar traps: Simple and effective, cider-vinegar traps consist of a shallow container with a small amount of apple cider vinegar, water, and liquid dish soap.
To make a cider-vinegar trap: Find a shallow container—a tuna can is perfect—and fill it with equal parts water and apple cider vinegar. (The liquid should be at least ¼-inch deep.) Put a few drops of liquid dish soap into the mixture and stir gently. Place the trap near the base of the affected plant or, ideally, inside the pot on top of the soil. Check it every few days to refresh with new vinegar and water.
3.Flypaper: Flypaper ribbons, such as those hung in horse barns to catch outdoor flies, can also be used to catch fungus gnats. However, these traps are usually overkill for gnats and can easily get stuck to things you don’t want them to stick to, such as furniture, hair, plants, and so on.

Fungus Gnats

Tan to brown leaf spots, small black fruiting bodies (pycnidia) may be visible in the lesions. Lesions on Rudbeckia and Echinacea are purple. Lesions may be more severe on older foliage.

Avoid overhead irrigation or carefully time it such that the duration of leaf wetness is minimized.

Protectant fungicides can be used to manage Septoria leaf spot.

Mycosphaerellaceae

Symptoms of infected plants are premature yellowing, dieback, wilting of older leaves, and stunting of plants, followed by death of all foliage and sometimes root rot. Unlike Botrytis species, S. cepivorum does not produce spores to spread and establish disease.

The hyperparasite Coniothyrium minitans may provide biological control, and a commercialized product ‘Contans’ is based on this.

Certain crops such as lettuce, beans and chicory can contribute to inoculum build-up significantly. Soil infestations can also be reduced by metam sodium and biological soil disinfestation.

Sclerotiniaceae

The black spots are circular with a perforated edge, and reach a diameter of 14 mm (1⁄2 inch). Badly affected plants, however, will not show the circular patterning, as they combine to cause a large, black mass. The common treatment of the disease is to remove the affected leaves and spray with antifungal solutions. Some stems of the roses may become affected if untreated, and will cause progressive weakening of the rose.

Keep the foliage as dry as possible, since the spores need a wet surface in order to germinate. Avoid overhead watering, or water early in the day so the foliage has time to dry before nightfall. Improve the air circulation around your roses by spacing them properly and pruning them regularly.

Removing infected leaves from the plant and fallen leaves from the ground will slow the spread of the infection, as does avoiding wetting the leaves of plants during watering. An infected plant can be removed from the area, which will slow the spread of infection to other plants, but this often is not desirable. Fungicides, such as mancozeb, chlorothalonil, flutriafol, penconazole, or a copper-based product, applied upon new leaf emergence or first appearance of black spot, can be used to control the disease. If a more natural and nontoxic approach is desired, diluted neem oil is effective both against black spot and as an insecticide against aphids, or cows milk diluted 1:3 with water is effective if sprayed on to the leaves. It is usually necessary to repeat the spraying at seven- to 10-day intervals throughout the warmest part of the growing season, as the fungus is most active at temperatures from 24 to 32 °C (75 to 90 °F).

Black spot

The first symptom is usually the appearance of minute yellow stippling on the upper surface of leaves that have mites on the undersides. Infested leaves generally become yellow and may drop off from plants. Red spider mites on the back of a leaf (left) and mite damage on a cucurbit leaf (right).

Host plant resistance can be a valuable component of an IPM system that is compatible with other control measures such as chemical control, and it makes beneficial natural enemies more effective. In many cases, even partially resistant cultivars are useful to enhance the efficacy of biocontrol agents.

Insecticidal soap or botanical insecticides can be used to spot treat heavily infested areas. On fruit trees, horticultural oil should be applied early in the season or late in the fall to destroy overwintering eggs. Dust on leaves, branches and fruit encourages mites.

Tetranychidae

Bacterial leaf spots show as necrotic, circular or angular lesions and may have a yellowish outline or halo. Early symptoms of bacterial leaf spots show on older leaves and lesions appear water-soaked. Bacterial spots affecting dicytyledounous plants that have net-like leaf veins sometimes take a more angular shape as they are restricted by the large leaf veins. Bacterial spots on monocotyledonous plants with parallel leaf veins have a streak or striped appearance. The most obvious symptom of bacterial leaf spots are the blackening of the spots after infection. Eventually older lesions dry out and become papery in texture. Bacterial spots can also produce white, yellow, light cream or silver bacterial exudate depending on the type of bacteria, which may ooze from splitting lesions and/or from the underside of the spots. Bacterial leaf spots caused by Pseudomonas show red-brown spots which can distort the infected leaves, whilst those caused by Xanthomonas are angular or circular in shape outlined with a yellow halo.

Prevention of leaf spot disease includes variety selection, crop rotations, plant hygiene and fungicide use for seeds and foliage. To stop the spread of pathogens good sanitation is key as well as the avoidance of handling plants when wet, planting pathogen-free and resistant cultivars and moving out infected plants. Reducing the humidity around plants and in greenhouses by good plant spacing for air circulation, and watering early in the day can also help prevent leaf spot disease. Disinfection of tools and washing of hands is important when handling infected plants. Susceptibility to leaf spot disease can occur due to insufficient or excessive fertilising of plants. Checking plants periodically for any signs and symptoms of disease is also good practice. Avoiding overhead watering and increasing air circulation by pruning plants should be done to prevent humid conditions. Collecting and removing fallen leaves is important in reducing the amount of pathogenic agents on the ground to prevent dispersal of disease.

Certain chemicals are used to treat leaf spot disease, such as the Bordeaux mixture, the first fungicide to have been developed, which treats many fungal and bacterial leaf spots. Other fungicides such as zineb, chlorothalonil and Captan, also treat leaf spot disease and Benomyl specifically treats Cercospora leaf spots, cherry leaf spot and black spot of roses. Thiabendazole is used to treat leaf spot diseases of turf and ornamentals. Both fenarimol and nuarimol are pyrimidines that also treats leaf spot disease. More chemicals include Triazoles an organosphosphate fungicide, Imazalil, Procholora and Fentin hydroxide. Registered fungicides in use are thiophanate methyl, chlorothalonil, ferban and mancozeb.

Bacterial leaf spot

Young seedlings develop a rot at the crown. Later, the tissue becomes soft and constricted, and the plants wilt and fall over.

Tool Sterilization. Prune Damaged Foliage. Plant Resistant Vareities. Crop Rotation. Keep The Soil From Being Soggy. But Don't Let It Get Too Dry. Sow Seeds The Right Way. Airflow Helps.

Once fusarium wilt infects a plant, there is no effective treatment. Remove and dispose of affected plants immediately; don't compost this garden refuse. Whenever possible, remove and replace fusarium-infected garden soil.

Fusarium wilts, blights, rots and damping-off

Some of the most common symptoms of nutrient deficiencies are chlorosis, foliage color changes, overall plant stunting and sometimes necrosis. All can be caused by one or more deficiencies.

Monitor pH Levels – There are lots of things that can cause a hydroponic nutrient solution to drift outside of the ideal range of about 5.6. Usually, if a nutrient solution is left unmonitored for too long, it can start drifting outside of this range because it gets too dense in raw, use nutrients. Other times, it might start becoming too acid or too alkaline when you add new hydroponic nutrients or transfer your plants to a new medium. Since pH levels can change very rapidly, it is important to check your pH level daily. The longer your nutrient solution spends outside of this ideal range, the greater the chance that your flowers or vegetables will suffer a plant deficiency. Use a pharmaceutical grade pH adjustment product designed specifically for hydroponics to make the necessary adjustments. This way you have less of a chance of accidentally over compensating your pH adjustments.  Keep Temperature Levels Stable – Your nutrient solution should be fairly cool to temperate, somewhere in the range of sixty six to seventy one degrees Fahrenheit. You should be particularly aware of this if you happen to live in an unusually warm or cold part of the world. If you feel it is necessary to prevent plant deficiency, take extra steps insulate your grow room against outside elements. You should also avoid placing your reservoir directly on the ground in your grow room, as the floor can be very cool, which can transfer to the reservoir and cause a plant deficiency.

When the temperature of your indoor garden or the nutrient solution falls below 55 degrees Fahrenheit, plants take up less phosphorus than they need. If you've determined that the temperature is not the problem, treat your plants to bone meal, a supplement that's rich in phosphorus.

Nutrient deficiency

Changes in leaf color or texture can signal an insect problem. Leaves may become spotted, speckled or yellowed when insects are present. Leaves might also become distorted or misshapen, often looking cupped or pinched. You may spot webbing draped along leaf undersides or where leaves attach to stems.

Pericallis Appendiculata

(Pericallis Appendiculata)

What is the plant

Planting

Water

Soil

Fertilizer

Temperature

Sunlight

Pruning

Professional care guides

Possible diseases

More plants

Have a problem with such plant? You can contact one of our botanists